August 27th, 2008

Stuck Bullet? Solve Problem with Drop Rod

sinclair bullet drop rodWhen using the Stoney Point type OAL gauge (now sold by Hornady), we sometimes get a bullet stuck in the rifling. This can also happen with a squib load or when extracting a round with the bullet seated hard in the lands. You can use a cleaning rod or a wood dowel to tap out the bullet, but a brass drop rod will do the job faster and easier, with less risk of nicking your crown.

You can make a drop rod yourself from brass or bronze rod. Just make sure to smooth over any burrs or rough spots on the ends. Or just order a set of brass bullet drop rods from Sinclair Int’l. You drop the Sinclair Rods (item 52-500) down the barrel from the muzzle end with the rifle standing upright. Sinclair Bullet Drop Rods are made of brass so they will not harm the rifling in your barrel. Each $11.50 set consists of two Drop Rods that will handle .20 up to .416 caliber.

Remember, for safety sake, Drop Rods are never to be used to dislodge live or loaded rounds! Always remove the Drop Rod from the barrel before chambering another round!

Sinclair Bullet Drop Rod

Similar Posts: