September 12th, 2009

Non-Toxic Ballistol Lube Works Great for Case Sizing

We recommend Ballistol as a near-ideal case lube for basic full-length sizing. It’s extremely slick, and goes on very thin when applied with the aerosol version. Ballistol is this Editor’s favorite case lube for regular resizing, and I’ve tried all the popular brands including RCBS, Hornady One-shot, and Lee lube. Unlike many other case lubes, with Ballistol you won’t need to use a solvent or tumble the brass afterwards to remove the lube. All you need is a very thin layer of Ballistol, and this easily wipes off with a paper towel. The Ballistol will also remove the carbon on the outside of fired case-necks, so you can clean and lube your cases at the same time. (For case-forming and neck expansion, we recommend a thicker lube such as Imperial Die Wax or Mobil 1.)

Unfortunately, many folks have told us that they can’t find Ballistol at local shops, or they want to combine it with a reloading supply order to cut down on shipping costs. Here are sources for Ballistol, including Brownell’s and MidwayUSA. For convenience, we recommend the aerosol version, but the liquid version can be diluted and used also.

Brownell’s
6.0 oz. Aerosol $7.58 982-000-002

MidwayUSA
6.0 oz. Aerosol $7.49 831231
16 oz. Liquid $7.49 164428

BULK ORDER SOURCES:

Ballistol USA
PACKAGE 1: BALLISTOL-LUBE
Four – 6 oz. Aerosol Cans
$ 24.00 + 10.00 s&h = $ 34.00

FireHawktech.com
Combo Pack
Two – 6 oz. Aerosol Cans
One – 16 oz. Liquid Can
Total $24.95

Aerosol Full Case (12 cans)
Twelve – 6 oz. Aerosol Cans
Total $81.00 (just $6.75/can)

Ballistol Frequently Asked Questions
Q: Is the “Ballistol Lube” with the white label the same as the Ballistol “Sportsman’s Oil” with the green label.

A: Yes. Same product, just different labels. But remember there are both aerosol and liquid versions. The aerosol comes out very thin — like water. The liquid is thick — like motor oil.

Q: The liquid version is more economical by weight, but can I dilute it down?

A: Yes, Ballistol liquid can be diluted with water, up to a 10:1 ratio and it will remain slick. We recommend about a 6:1 ratio for use as a general case cleaner and lubricant — but you should experiment yourself.

Q: If Ballistol oil can be diluted with water, does that mean it will promote corrosion?

A: No. Ballistol emulsifies in water. The resulting product will displace H20 like WD40, and then leaves a thin, protective oil. Ballistol is also mildly alkaline (pH between 8.5 and 9.5), so it neutralizes mild acidic residues such as hand sweat or residues from black powder (which are acidic).

Q: What’s Ballistol made from — it smells funny?

A: Ballistol is made from medical grade mineral oil, alkaline salts of oleic acid, several alcohols, Benzyl Acetate and oil from vegetable seeds. The smell comes from medicinal Anethole oil, which is derived from the Anise plant. Ballistol is biodegradable and non-toxic. CLICK HERE for the Material Data Safety Sheet

For more information on Ballistol, contact Ballistol USA, (800) 253 2460, (252) 261 0408 (fax).

Similar Posts:

Tags: , , ,