October 5th, 2009

IMR 8208 XBR Load Data Available Online

We interviewed Chris Hodgdon of Hodgdon Powder Co. and learned some important information about the IMR’s new 8208 XBR powder. First Chris confirmed that ADI (Australian Defense Industries Ltd.) is the manufacturer. The powder is a very small extruded powder, similar to H322 in kernel size. That means it packs densely in a case and meters well in manual powder measures. As to burn rate, Chris stated that IMR 8208 XBR is “a tad slower than H4895.” Chris confirmed that the powder’s distinctive qualities are temp stability in an ultra-wide temperature range and a very broad accuracy window. Chris said: “Jim Carmichael found he could go up and down [significantly] in his charge weight and the group size didn’t vary.”

Hodgdon has already begun shipping IMR 8208 XBR to “OEM manufacturers” according to Chris, who said a major manufacturer will be loading the powder into .308 Win ammo and possibly other cartridges. Chris hopes to send AccurateShooter.com some of the new 8208 XBR powder for testing within two weeks. When will the powder be available to the general public? Chris couldn’t give a firm answer, but he stated “we hope to start shipping in January, 2010, prior to SHOT Show.”

IMR 8208 XBR Load Data Now Online
The Hodgdon Reloading Center site has been updated to include IMR 8208 XBR load data for 41 cartridges. Go to www.data.hodgdon.com and select “Cartridge Loads”. Then you’ll need to input the rifle cartridge of your choice. We quickly found IMR 8208 XBR loads for the .223 Rem, 22 PPC, 22-250, 6 PPC, 6mm BR, 6.5 Grendel, and .308 Win, and many other cartridges. NOTE: For most of these cartridges, the stated “max load” velocities were NOT particularly impressive. So, be aware, that this initial load data is pretty conservative.


Similar Posts:

Tags: , , , ,