Eurooptic vortex burris nightforce sale




teslong borescope digital camera barrel monitor


As an Amazon Associate, this site earns a commission from Amazon sales.









September 27th, 2010

Danny Biggs Wins SOA F-Open Class Shooting from Bipod

Danny Biggs Sinclair Int'l BipodWe’ve confirmed that Danny Biggs, the Spirit of America’s F-Open Class Winner, shot the match using a bipod, rather than a pedestal rest. This is pretty remarkable because top F-Open competitors have traditionally preferred the stability and quick adjustability you get with a deluxe pedestal rest such as a Farley, John Loh (J.J. Industries), or SEB. Of course, Danny had a trick up his sleeve — his prototype Sinclair International bipod features a quick-adjusting elevation control. No, you can’t buy a bipod like Danny’s — at least not yet. Sinclair Int’l hopes to offer production versions before the end of 2010.

Sinclair staffer Pete Petros competed at the 2010 SOA Match, and recounted his experiences in Sinclair’s Reloading Press. Concerning Biggs’ bipod, Petros wrote:

An interesting fact about Biggs’ win is that he was shooting off of the Sinclair F-Class Bipod which is generally used in F-TR competition. In F-Class open most competitors shoot off of a bench-type rest modified to shoot off of the ground in the prone position. The bipod Biggs [used] is a new-model Sinclair Elevation-Adjustable version of the newer Sinclair F-Class Bipod. Danny has been testing this product for us during the past year and obviously is having great results. We should have these bipods ready for production in a few months. Keep posted to our website for announcements. But trust me, I think Danny would shoot well balancing his gun on a rock –- he’s that good!

Danny Biggs Sinclair Int'l BipodWhile most F-Open shooters used a front pedestal rest, either a joystick design or a center column pedestal with remote-adjustable windage top, Danny used a wide-base bipod, as he had done at past Nationals in the F-TR class. But Danny’s bipod was very special. It is a prototype, modified Sinclair design with height adjustment via a central, vertical-axis knob.

As you can see from the pictures below, the left and right bipod legs are attached to a T-shaped silver (aluminum) bracket. This bracket moves up and down as the silver knob is turned clockwise or counter-clockwise. As the knob turns, its threads pull the T-shaped bracket up and down relative to a center block of aluminum bolted to the bipod’s attachment to the rifle’s forearm accessory rail. With this system, Danny can easily reach forward and make precise adjustments in elevation. Note that the Sinclair bipod’s secure rail attachment is retained and Danny can still adjust rifle cant (tilt), using the rear push-button handle. This rear handle functions like a Pod-lock allowing the rifle to be tilted a few degrees to one side or the other to compensate for side-sloping terrain.

Danny Biggs Sinclair Int'l Bipod

Danny Biggs Sinclair Int'l Bipod

Permalink Competition, New Product 2 Comments »
September 27th, 2010

Salt-Bath Nitriding for Barrels — Whidden is Impressed

Many shooters expend considerable time and effort to coat their bullets with friction-reducing compounds such as Boron Nitride (HBN), Molybdenum Disulfide (Moly), and Tungsten Disulfide (WS2 or ‘Danzac’). Many of these same shooters believe that coated bullets permit longer strings of fire between barrel cleanings. Also, there is some evidence that coated bullets may extend barrel life (though this remains controversial).

What if you could enjoy all the benefits of coated bullets without the effort? When you think about it, why not apply the anti-friction coating to the barrel itself, rather than the bullets? That is the thinking behind salt-bath nitriding of barrels. This nitriding process creates a very slick, very hard surface coating on the steel in the bore. The coating is only 10-20 microns thick (so it doesn’t cause pressure problems). But that coating is enough to reduce friction, and just possibly, extend useful barrel life.

MMI barrel nitriding

John Whidden, Camp Perry Long-Range National Champion in 2007, 2008, and 2010, recently had one of his Broughton 6mm match barrels nitrided by Joel Kendrick. Joel does the salt-bath nitriding for MMI TruTec. Whidden reports he “is happy as he can be with the barrel” after the nitriding process. After nitriding, the stainless Broughton 5C barrel was “every bit as accurate as before, and noticeably easier to clean”, according to John. Also, John reports that he did NOT have to change his load after the barrel was nitrided (which left it with a handsome black, semigloss finish). Whidden says, “after cleaning, the barrel takes about 3-4 rounds to settle in… that’s the same as before.” This barrel shot very well before nitriding, and after nitriding, John used it successfully at Camp Perry in the 2009 Wimbleton Cup competition.

MMI barrel nitriding

Overall, John tells us “Everything looks good. No accuracy loss, and easier cleaning.” He is pleased enough that he has sent more barrels to Joel Kendrick for nitride processing. John also said that he’s heard that nitrided barrels in some of the big caliber rifles, such as the .338 Lapua Magnum, are showing “significantly enhanced” barrel life.

MMI barrel nitriding

To learn more about salt-bath nitriding for barrels, or to place a processing order with MMI-TruTec, email joelkndrck [at] aol.com, or call Joel at (704) 616-6442. Joel, a past 600-yard Shooter of the Year, is very knowledgeable about both shooting and the nitriding process. He can give you well-informed answers to your questions. Price for nitriding depends on quantity — call Joel for pricing details.

Permalink Competition, Gunsmithing 10 Comments »