Building a Great Varmint Rifle
Here’s a great YouTube video that shows the creation of a high-end, 22-250 varmint rifle from start to finish. The rifle was crafted by Chad Dixon for O’Neill Ops. Once the build is complete, the video shows the rifle being tested at 440 yards. With the camera filming through the scope, you can even watch the trace, starting at the 2:36″ time mark (this is very cool).
Watch this Video in HD!
Any person with an interest in gunsmithing should watch this video. It shows barrel profiling, tenon-thread cutting, chambering, CNC stock inletting, bedding, and stock painting. This is one of the best short videos of its kind on YouTube.
For this build, Chad Dixon of LongRifles, Inc. teamed up with O’Neill Ops. The video shows the “Coyote Rifle” build, step by step, from the cutting of the tenon threads, to the 440-yard field test at the end of the build. To learn more about this rifle’s components and its performance in the field, contact James O’Neill, www.oneillops.com, (605) 685-6085.
Chad Dixon of LongRifles, Inc.
Chad Dixon’s introduction to firearms began in 1991 as a marksmanship instructor and competitive shooter in the U.S. Marine Corps. Chad began building rifles in 2000 at the Anschutz National Service Center, where he worked with U.S. Olympic shooters. In 2003 Chad took a position with Nesika Bay Precision/Dakota Arms. After leaving Nesika, Chad deployed to the Middle East as a security contractor for the U.S. Dept. of State. On his return to the USA, Chad started LongRifles Inc., a custom rifle-building company.Dixon-built rifles combine modern CNC manufacturing methods with traditional expert craftsmanship. Chad’s rifles have won major int’l and national level competitions in Smallbore, Smallbore Silhouette, High Power, and Long Range Palma disciplines.
Similar Posts:
- “Pride & Joy” Palma Rifle in Turkish Walnut
- 3P Smallbore Competition at Camp Perry
- Complete 6.5×47 Benchrest Rifle Build — Start to Finish on Video
- Build Your Own Portable Shooting Bench — Step-By-Step Video
- Chad Jenkins Sets IBS 600-Yard LG Record with 1.495″ Aggregate
Tags: Chad Dixon, CNC inletting, Coyote Rifle, LongRifles Inc., OneillOps.com, Varmint Rifle
Slick video! Now how does it shoot?
If you know anything about Chad’s capabilities and craftsmanship, you can bet this gun will shoot!
I do, and I have no doubt that it does. It is just that I like to see targets. Obviously, his workmanship is superb, and the means by which he accomplishes it exceptional.
Late to the discussion… anyone can post pics of a group, my job is to film it… this platform performs with much more precision, than I am capable of… I can post pics of a .5″ group @ 100yds off of a bipod, or I could take a still shot of the 1/2 life sized coyote I was shooting at in the end of this video from 440yds, while printing 2″ groups off my stock pack… BUT the true targets I post, are the kills on film, not groups on paper.