July 3rd, 2013

From Sweden — SPUHR Unimount Scope Mount System

When a scope mounting system costs as much as a factory hunting rifle, it better be something special. At $410.00, the Spuhr Unimount Scope Mounting System is one expensive piece of kit. But if you shoot .338 Lapua Magnums or 50 BMGs, this mount may be worth the money. Made in Sweden, the aluminum Spuhr Unimount integrates “rings” into a +20.6 MOA (6 MIL) base with built-in bubble level. The matte-black-anodized Spuhr Unimount has some interesting design features. The clasping bolts are set at a 45° angle. Ring internal surfaces are grooved for enhanced “grip” (these are not threads — the surface is precision ground and smoothed so there are no sharp edges). Available in 30mm and 34mm diameter (and various heights), the Spuhr Unimount even comes with a scope indexing tool to help you align your scope correctly with the mount. Along with the standard Unimount shown in the photo, a cantilever-sytle Unimount is offered for AR-platform rifles and other guns requiring forward scope placement.

Spuhr unimount 34mm scope rings base mount tactical accurateshooter.com

SPUHR Unimount Features

  • Swedish-made machined aluminum one-piece scope mounts
  • Rings are cut at 45 degrees instead of horizontal so turrets can be easily viewed from the rear and no bolt heads interfere with scope controls
  • Rings are grooved on the interior to prevent slippage and to allow gluing
  • Built-in, easy-to-view bubble level in rear of mount
  • Available as a standard mount or cantilever
  • Included scope indexing (alignment) tool
  • Built-in 20.6 MOA (6 MIL) Elevation

Spuhr unimount 34mm scope rings base mount tactical accurateshooter.com


Similar Posts:

Tags: , , , , , ,