March 20th, 2014

Budget-Priced Range Cart Does the Job for under $50.00

Creedmoor Sports Range Cart CRC-1High Power and F-Class shooters have a ton of gear they need to carry out to the firing lines. To do the hauling, you can certainly purchase a factory-made, purpose-built cart that folds up and has all the bells and whistles. The Creedmoor Sports CRC-1 (photo right) is a proven, quality product that works great. You’ll find these used by top shooters at Camp Perry. But the Creedmoor CRC-1 cart costs $499.95.

For a tenth that price ($49.99), plus a few dollars more for do-it-yourself enhancements, you can have a heavy-duty cart that will haul all your gear just fine, though it doesn’t fold up.

Check out the Harbor Freight Welding Cart, item #65939. This cart is ON SALE right now for just $49.99. Overall size is 29-1/2″ L x 20″ W x 49″ H, and width between side rails is 18″. The wheels (with tires) are 20 3/4″ in diameter for smooth rolling. Consider that, if you made your own cart from scratch you could easily pay $30.00 or more just for the large-diameter wheels and axle. Do note — this cart has air-filled tires. Be sure to inflate before you go to the Range!

As sold, the Harbor Freight Welding Cart isn’t ideal for range use. But with a few bungee cords (and some creativity), the cart can be adapted pretty easily to hauling your gun gear. Check out this example we saw at the Berger Southwest Nationals. It’s carrying a rifle in hard gun case, bipod, folding chair, shooting mat, tripod, spotting scope, rear sand-bag, and ammo box. If you want to enhance the basic cart, it’s easy to add plastic side-panels on the bottom unit, and fit a barrel-holding system on the cross-tube. This ensures rifles and gear won’t flop forward. (A small piece of wood under the bottom panel provides a bit of extra lift that will keep the bottom plate out of the dirt and gravel.)

Welding Cart Range Cart

Click Photos Below to Zoom

Welding Cart Range CartWelding Cart Range Cart

How to Upgrade Welding Cart for Range Use
Get a block of hard foam rubber. Cut keyhole slots in the rubber to grip the barrel and umbrella/scope stands. Mount the rubber block to the cross piece with self-tapping screws, or drill a horizontal channel in the rubber so the whole block fits over the cross-tube. On the lowest leading edge of the welding cart box (at ground level, front), fit a block of wood 2″ high (you can also fabricate metal extensions). This will make the cart lean back a little more, which helps stabilize the contents on sloping terrain.

You may want to enclose the sides of the bottom box area so small items don’t fall out. You can tack-weld aluminum side-plates if you want a fancy appearance. I prefer to just cut sheet plastic from a home improvement store. These plastic panels can be attached with screws or even zip-ties around tubing.

Run the plastic side panels up high enough that stuff like hats and muffs don’t fall out. After transport you can transfer ammo boxes and small items to the upper box (attached to the back side of the cross-tube).

The hardest component to find may be the hard rubber blocks for the barrel keeper, but you can also make a barrel-holding block out of wood, with some carpet to protect the barrels. The nice thing about the rubber is that it can be cut to snap over the barrels so you don’t need straps. Likewise, you can drill a hole transversely through the rubber, then slot it from the bottom and it will slide over the horizontal tubing with no fasteners needed.

Comment: This cart is heavy and it takes up a lot of space. You’ll need a station wagon, SUV or pickup truck to haul it around. But it’s cheap. The money you save on a range cart could pay for a new Krieger or Bartlein barrel, AND some new brass. Those things (new barrel and brass) will likely improve your scores more than having a fancy $500.00 range cart.

Permalink Competition, New Product 2 Comments »
March 20th, 2014

Registration Opens for USA’s Most Popular Field Target Regional

Now in its fifth year, the Northeast Regional Field Target Championship (NRFTC) is the country’s largest regional championship with nearly 100 shooters participating in nine shooting disciplines. Open to professionals, amateurs and families, the NRFTC offers a challenging yet forgiving shooting course in the beautiful Finger Lakes region of New York. The event will be held on the Crosman Corporation campus in Bloomfield, NY from July 11-13, 2014. NOTE: Pre-registration closes June 1 when the match fees increase from $50 to $60.

CLICK HERE for Online Registration, Event Rules, and Lodging Options..

“Spots are limited, so please register soon,” says Mark DeBoard, Shooting Services Manager for Crosman. “Field target is a fun event for all skill levels. Participants will benefit by shooting alongside members of Team USA and other [top shooters] from across the country.

Field Target New York

The event runs under American Airgun Field Target Association rules. Field target competitors attempt to knock down a variety of steel targets set at distances ranging from 15 to 50 yards. “Shooting is truly a level playing field, making it a great family experience. Age, height, and weight don’t offer any advantages, so we see both adults and youth performing at high levels,” says DeBoard.

field target

Field Target Competition Explained — Video from 2013 World Championship

Permalink - Videos, News No Comments »
March 20th, 2014

Trim-It Case Trimmer Features Micrometer Cut-Length Control

This new tool trims cases quickly, with precision control over case length via a micrometer-type dial. The folks at ACT Tactical have developed an easy-to-use compact case trimmer called the TRIM-IT. Crafted from 6061-T6 aluminum, this sturdy case trimmer comes with a 100% lifetime guarantee. The $97.50 TRIM-IT features a micrometer that’s built into the unit itself. Caliber-specific inserts (called “Caliber Dies”) index off the case shoulder.

Trim-it Case Trimmer Micrometer Cartridge Brass

The TRIM-IT can work with any hand-drill or drill press. Once you get the hang of it, you can trim a case in 7-8 seconds — that gives you a production rate of 400+ cases per hour. The TRIM-IT delivers repeatable precision to plus/minus one-thousandth. This unit also holds its cut-length setting, unlike some other trimmers which require frequent adjustment.

Trim-it Case Trimmer Micrometer Cartridge Brass

The basic unit ships with two caliber dies, for .223 and .308. Other listed caliber dies include 6.8 SPC, .300 BLK, .30-06, 30-30 Win, 300 Win Mag, 7MM REM, 7.62x54R, and 8MM Mauser. Other cartridge types can be custom-ordered from EZTrimit.com. To change dies, simply loosen the set screw on the TRIM-IT, take the caliber die out, add another one, and tighten the screw — quick and easy.

The built-in micrometer is great. The handy dial gives you a positive, repeatable length setting quickly — no fiddling with locking rings or spacers. Once you get the ring set properly, the cut lengths are consistent from the first case to the last. Expect your case OAL spread to be about +/- .001″ (starting with full-length-sized cases with uniform rim to shoulder lengths). For more information, email sales [at] eztrimit.com or call (562) 602-0080. You can see how the Trim-It device works in the video below.

Video Shows Trim-it Set-Up and Operation

Permalink Gear Review, New Product 9 Comments »