May 13th, 2014

Blast from the Past — Benchresters Circa 1955

With so much attention given to the newest hardware, and most recent reloading innovations, we sometimes forget that Benchrest shooting, as a competitive sport, has been around for quite a long time. And some of those “old school” shooters managed to put together some pretty fine groups even without 21st Century gadgets and gear.

Click Photo to See Larger Version.
1955 Benchrest shooters

Here are some of the founding fathers of benchrest shooting, in a photo taken nearly six decades ago (4/3/1955). Men’s fashion has changed a bit over the years. Tony Boyer notwithstanding, you won’t find so many Stetsons at a shooting match these days. Courtesy of Sierra Bullets, here’s a “throwback” image of Benchrest shooters at the Brea, California “Round-Up” Shoot April 2 – 3, 1955. Left to right are: Frank Snow, (Founder of Sierra Manufacturing Company), John Moffit, K. E. “Smitty” Smith (NBRSA Director), Al Christie, E.F. Stewart, Jack Rice (sitting), I. F. Jack Williams, Lindsey King (behind Williams), Don “6mm” Smith, Frank Hemsted, and Art L. Elliott.

If you like this sort of “trip down memory lane”, visit Sierra Bullets’ Facebook page. Every Thursday morning, Sierra publishes a “Throwback Thursday” photograph from some decades past, together with a short featurette on the shooting-related item/person in the photo.

Permalink News 1 Comment »
May 13th, 2014

Lyman Case Prep Xpress — Versatile, Affordable

For a few years now, Lyman has offered the Case Prep Xpress, an all-in-one case prep center that chamfers necks (inside and out), cleans and uniforms primer pockets, brushes the inside of case-necks, and uniforms flash holes. The unit can also ream out the crimps on military brass. However, the Lyman Case Prep Xpress does NOT trim cases.

The Lyman Case Press Xpress comes with all the necessary tools and attachments (listed below), so you don’t have to purchase extra accessories. The 5 gear-driven heads on the unit are powered by a high torque, low-speed motor ideal for case prep operations. Lyman’s Case Prep Xpress features handy storage areas for accessories, a removable brass shavings dump pan, and a handy clean-up brush.

Lyman Case Prep Xpress Lyman Case Prep Xpress Includes:

Inside Deburr (VLD) Tool

Outside Deburr Tool

Flash Hole Uniformer

Primer Pocket Uniformer (Large & Small)

Primer Pocket Reamer (Large & Small)

Primer Pocket Cleaner (Large & Small)

Case Neck Brushes (25, 30, 38 & 45 Cal)

Case Neck Lube (Mica)

Removable Brass Shavings Dump Pan

Clean-up Brush

In the two years that this product has been on the market it has been a hot seller. We’ve used the Case Prep Xpress. If you’re prepping hundreds of cases, this unit will save considerable time and reduce hand/finger fatigue. While the Case Prep Express is not as sturdy as the metal-bodied Hornady prep center, the Lyman unit offers a lot of functionality for the price ($108-$125 at various vendors).

Video clearly illustrates all case prep functions. Worth watching.

Lyman Case Prep XpressYou can find Lyman’s Case Prep Xpress for under $120.00, making it much less expensive than the larger Hornady Case Prep Center, which runs about $400.00. The Hornady unit is beefier, and will trim cases. However, we think the compact Lyman unit makes sense for guys who already have a good case trimmer, such as a Forster or Wilson. The Lyman Case Prep Xpress is hundreds of dollars less than the Hornady prep center. The money you save will buy lots of bullets and brass.

Case Prep Xpress $108.08 at Midsouth
The Lyman Case Prep Xpress is sold by most of the big vendors. The best current price we found was at Midsouth Shooters Supply, which sells the Lyman unit for $108.08.

Story Sourced by Edlongrange.
Permalink Bullets, Brass, Ammo, Reloading 1 Comment »