Eurooptic vortex burris nightforce sale




teslong borescope digital camera barrel monitor


As an Amazon Associate, this site earns a commission from Amazon sales.









August 4th, 2014

Midsouth Shooters Supply Has Many Hodgdon and IMR Powders

Midsouth Shooters Supply has received a substantial amount of popular reloading powders. This is good news for folks who have been short on powder. No, there’s still no Hodgdon Varget or H4350, but Midsouth does have many other great propellants in stock. Hodgdon powders in stock today include the popular H322, Benchmark, Retumbo, H50BMG, and US 869 (a spherical powder for big magnums). IMR propellants in stock include IMR 4227, IMR 4320, IMR 4831, IMR 4895, IMR 7828SSC, IMR 8208 XBR. Midsouth also hase Vihtavuori N135, N160, and N165 in stock now.

CLICK HERE for Smokeless Powder in Stock at Midsouth Shooters Supply.

Partial Selection of Powders Currently in Stock at Midsouth:
Hodgdon Powder Midsouth IMR

Permalink Reloading No Comments »
August 4th, 2014

Sinclair Videos Show Cartridge Brass Cleaning Options

Shiny brass — it may not shoot more accurately, but it does make you feel better about your hand-loaded ammo. While it’s not necessary to get brass “bright and shiny” after every firing, it is a good idea to clean powder residue, grime, and grit off your brass before you run cases into sizing dies. There are many ways to clean cartridge cases. A quick wipe with solvent on a patch may suffice for recently-shot cases. Older brass with baked-on carbon may require lengthy tumbling. Ultrasonic cleaning is another popular option that gets your brass clean inside and out.

Sinclair International has a series of helpful videos on brass cleaning. These short “how-to” videos, hosted by Bill Gravatt, Sinclair’s past President, cover the various processes you can use — tumbling, ultrasonic cleaning, chemical cleaning, and cleaning by hand.

Video ONE — Cleaning Brass in Vibratory or Rotary Tumbler

TIP: Brass that has recently been shot will clean more easily than brass that has been sitting many days or weeks. If your tumbling media is fresh the job should be done in an hour or less. It’s your choice whether to tumble with primers removed or with primers still in the cases. If you choose to tumble with primers out, we suggest you deprime with a depriming die, rather that put dirty brass into your sizing die. Some people like to add a teaspoon of liquid polish to the media. This does work, cutting tumble time, and making your brass more shiny. However, if you add liquid polish, do that BEFORE you add the brass and let the tumbler run for a 15 minutes to get the polish completely mixed into the media. Otherwise you can else up with gooey gunk inside your cases — a very bad thing.

Video TWO — Ulstrasonic Case Cleaning

TIP: There are many different types of solutions you can use. Soapy water suffices for some folks, particularly if you add a little Lemi-Shine. The Hornady and Lyman solutions work well, and can be used multiple times, provided you strain the solution to remove dirt and grit after cleaning sessions. Many ultrasonic cleaning machines have timers. Experiment with dwell time to see how long you need to immerse your brass. A very small amount of Ballistol in the solution will help lubricate your necks on the inside. This can make bullet seating go more smoothly, with more consistent neck tension.

Video THREE — Chemical Cleaners (Soaking without Ultrasound)

TIP: After using chemical cleaners, such as the Iosso solution, you need to water-rinse your brass thoroughly. A kitchen strainer helps with this (see video at 0:20). Also, don’t forget your brass in the chemical solution — follow the manufacturers recommendations and don’t exceed the recommended dwell time. Chemical cleaners work surprisingly well to remove grease and grime, and the solution can be re-used multiple times. However, if you want your cases to look bright and shiny (like new brass), you will probably have to tumble.

Video FOUR — Manual Cleaning (By Hand)

TIP: Keep some oversize patches in your range kit. At the end of your shooting sessions, wipe off your fired brass with a patch dampened with a mild, non-corrosive solvent (once again Ballistol works well). Before the carbon sets up on your brass it is very easy to remove. For tougher jobs, you can use 0000 Steel Wool (as Bill recommends in the video). You may find that timely hand-cleaning lets you avoid tumbling altogether — or you may choose to tumble (or ultra-sound) your brass only after a half-dozen or so firings.

Permalink - Articles, - Videos, Bullets, Brass, Ammo No Comments »
August 4th, 2014

Shooting USA TV Features F-Class on August 6 Episode

F-class f-tr f-t/r shooting using television TV

F-Class competition will be featured on this week’s episode of Shooting USA television. This week, Shooting USA takes an inside look at the rapidly-growing sport of F-Class shooting, with coverage of both F-TR and F-Open competition at 600 yards and beyond. This show will air three times on Wednesday, August 6, on the Outdoor Channel (see air times by region below). This episode will also feature the historic 1907 Winchester, a choice of gangsters in the 1920s.

F-class f-tr f-t/r shooting using television TVThe Shooting USA Hour on Wednesdays:
AIR TIMES BY TIME ZONE

Eastern Time 3:30 PM, 9:00 PM, 12:00 Midnight
Central Time 2:30 PM, 8:00 PM, 11:00 AM
Mountain Time 1:30 PM, 7:00 PM, 10:00 PM
Pacific Time 12:30 PM, 6:00 PM, 9:00 PM

F-Class Basics
The ‘F’ in F-Class stands for Farquharson. Canadian George Farquharson is credited with founding the sport in the 1990s. Farquharson wanted to create a discipline for fellow older shooters whose fading eyesight made it difficult to compete in traditional iron-sight high power matches. In 2007, the United States NRA officially recognized the prone shooting disciple. Since then the sport has grown rapidly. Over 350 shooters attended the 2013 F-Class Nationals in Raton, NM.

F-Class is similar to High Power rifle shooting, with competitors taking turns in the pits, pulling and scoring targets. Unlike conventional High Power shooting with iron sights, F-Class shooters use scopes (with up to 80x max power, though the most popular scope is still probably the 12-42x56mm Nightforce Benchrest).

All F-Class competition is shot prone. Competitors are classified into two divisions, F-TR (Target Rifle) and F-Open. F-TR rifles must be shot from bipod, and must be chambered for either the .223 Rem or .308 Win cartridges. Max F-TR gun weight is approximately 18.18 pounds, including bipod. In the F-Open division, rifles can weigh up to 10 kg (22 pounds) and front rests can be used (but you may shoot from a bipod if you wish). F-Open competitors may shoot any cartridge which is .35 caliber or under.

Permalink - Videos, Competition No Comments »