Eurooptic vortex burris nightforce sale




teslong borescope digital camera barrel monitor


As an Amazon Associate, this site earns a commission from Amazon sales.









August 13th, 2014

New Giraud Case-Trimming and Chamfering Tool

Giraud Tool has a new case trimmer/chamferer that works with a power drill (or other power source). Giraud’s patent-pending Tri Way Case Trimmer is a self-contained unit powered by your drill or motor. Using a sharp carbide blade it will trim your cases to length, deburr, and cut both inside and outside chamfers — all in one pass. That’s pretty impressive for a $90 tool that fits in the palm of your hand.

Close-up of the Tri Way cutter with clear plastic chip guard removed.
Giraud Tri Way Trimmer Case Cutter tool

Product Features
1. Fully adjustable for cartridge length (and depth of chamfer).
2. Tool includes carbide blade that cuts a 15° inside case mouth chamfer and 45° outside chamfer.
3. Case holder supported by sealed ball bearing raceway.
4. Tool includes removable, transparent plastic chip guard.
5. Tool can work in any orientation (vertical, horizontal, or any angle).

The Giraud Tri Way Trimmer is designed to be powered by a portable hand drill, drill press, or other dedicated rotating power source. The tool indexes off the shoulder of your cases, but the blade adjusts so that cartridge overall length (COAL) can be controlled with precision. Constructed out of 6061-T6 aluminum and 303 stainless steel, the Tri Way tool should last a lifetime. Note: This tool is not universal. The Tri Way is dedicated to a single cartridge and “related” cartridges with similar body dimensions. Thus you need a specific tool for each cartridge family. For example, the .308 Win tool will also trim .243 Win, .260 Rem, and 7mm-08.

Cartridge Sizes Available for Giraud Tri Way Trimmer:
.223 Remington (Also trims .17 Remington, .204 Ruger, .222 Remington, .222 Remington Magnum)
7.62 x 39mm (Russian)
.300 Blackout (Also trims .17 Rem Fireball, .221 Fireball)
.308 Winchester (Also trims .243 Winchester, .260 Remington, 7mm-08)
.30-06 Springfield (Also trims .25-06, .270 Winchester, .280 Remington)
.300 Winchester Mag (Also trims .264 Winchester Magnum, 7mm Remington Magnum)

Giraud Tri Way Trimmer Case Cutter tool

Product Tip from EdLongrange. We welcome reader submissions.
Permalink New Product, Reloading 4 Comments »
August 13th, 2014

“The Brick” Multi-Purpose Support Bag for Tactical Shooters

We know that quite a few hunters and tactical shooters read the Daily Bulletin. Here’s a product for you guys that need a multi-purpose padded support that can be easily carried and adapted to a variety of positions (such as on platforms, vehicle hoods, as well as flat ground). This versatile bag can be used on the front (supporting the fore-end), or in the rear (supporting the buttstock). Made in the USA, the Armageddon Brick costs $39.95. It is offered in three colors: Coyote Tan, Black, and Foliage Green.

Grippy shooting sandbag bag support

Made by Armageddon Gear, and sold through the Sniper’s Hide Store, “The Brick” has unique features that make it ultra-handy in the field. First the “grippy” outer material is rubberized and textured so it can provide a firm grip on a support surface as needed. Overlapping Velcro-lined straps allow the bag to be attached to a rifle fore-end, buttstock, tripod head, shooting sticks, or pack. The square cross-section provides secure contact between the rifle stock and support surface. You can easily adjust the firmness of the bag by adding or subtracting filler material. (Some guys will fill their Brick with sand; others may prefer beads or other lighter media to save weight.) The panel under the strap is nylon to allow the shooter’s hand to easily slide underneath the strap when desired.

Permalink New Product, Tactical No Comments »