November 8th, 2014

New 2500 Series Rear-Lug Rimfire Actions from Stiller Precision

Stiller’s Precision Firearms is now offering its new line of rear lug, benchrest-grade rimfire actions, the 2500X (single-shot) and the 2500XS (sporter class mag-fed). These actions have already performed superbly in competition (see below). These actions represent the state-of-the-art in rimfire receivers. Top rimfire benchrest shooters are building rifles around the new Stiller actions and the results have been very promising. These actions offer true benchrest-grade manufacturing tolerances plus a superior firing pin system that should allow greater shot-to-shot consistency. Expect fewer unexplained fliers with these Stiller actions compared with older, factory-based actions (such as the Rem 40X).

Stiller 2500X Rimfire Action
Stiller 2500X action rimfire benchrest

The 2500X is Stiller’s new rear lug rimfire benchrest action. This features an Anschutz-style loading ramp, center recoil slot, side bolt release, and a unique shroud/firing pin system for perfect alignment (and more consistent ignition). Unlike many rimfire actions, the 2500X has a trigger hanger for easy trigger maintenance. The 2500X’s body and bolt are crafted from 416R stainless steel with a nitride finish for smooth and trouble-free operation. The outside is OD ground after nitriding for precise tolerances and a distinctive two-tone look.

Stiller 2500SX Rimfire Sporter Action
Stiller 2500X action rimfire benchrest

The 2500XS is a rear lug rimfire benchrest action for the Sporter Class. The “XS” model features a Sako magazine and easy-to-use loading ramp. Like the 2500X, the “XS” has an advanced shroud/firing pin system, plus a trigger hanger for easy trigger maintenance. The bolt and body are nitrided, 416R stainless OD ground for a dimensionally precise, two-tone finish. This lightweight action is specifically designed for IR50/50 sporter class benchrest. It comes with one (1) magazine.

Proof of Performance — 2500X Action Shoots 250-25X
Mike Kuklis’s new rimfire BR rifle built on a Stiller 2500X action delivered an impressive 250-25X in competition last week. Mike drilled this superb 250-25X card at the Tuckertown BR Barn on the way to a 1000-86X match win. Credit J. Miller for the photos from Benchrest Central.

Stiller 2500X action rimfire benchrest

Product Tip from EdLongrange. We welcome reader submissions.
Permalink Gunsmithing, New Product 1 Comment »
November 8th, 2014

Hammer Time: Father and Daughter Enjoy IBS Benchrest Matches

Story by Jaime Hammer, IBS Social Media Manager
Paul Hammer was introduced to benchrest rifle shooting by his friend Bill Adcox at the Greenville Gun Club (in Greenville, SC) about five years ago. He has been an avid skeet shooter for most of his life, but his daughter never fell in love with that sport. The first time he took her to the rifle range with him, she was hooked. She loved the precision of it and that it’s very relaxing. If you haven’t been able to tell by now, I’m his daughter. What began slowly as a fun hobby that we could enjoy together picked up speed a year and a half ago, when we went to our first IBS match, a 100/200 yard match at Piedmont Gun Club. From then on, he spent much of his free time learning about the sport, from techniques to types of guns to how to reload his own ammunition.

Paul Hammer and Daughter Jaime Enjoy Time at the Range Together…
Paul and Jaime Hammer

He frequently practices or competes in both group and score matches at 100, 200, and 600 yards at Piedmont Gun Club, Polk County Gun Club, and Greenville Gun Club. This year, he even competed for the first time in the annual Groundhog and Egg Shoot in Hickory, NC hosted by Bull’s Eye Sporting Goods. His smallest group, made while practicing at 100 yards with a 6 PPC, was 0.17 inch. His best score, made at 100 yards at the NC State Championship with a 6 PPC, was 249 with 8 Xs (he commented that he “made a perfect score with 5 Xs on the sighter target!”).

He said, “For me, benchrest rifle shooting is enjoyable because there’s so much to learn, and the people you meet along the way are nice and helpful. It’s fun and challenging.” Although he always tries and wants to shoot well, at the end of the day, he just enjoys the sport, spending time with his daughter, and meeting new people.

Paul and Jaime Hammer

Part of his benchrest education has come from helping plan benchrest matches for Polk County Gun Club. Last September, in conjunction with Tony Moss, Paul began organizing monthly 100/300 yard groundhog and egg shoots. In doing so, he has learned more about shooting and what it takes to put together a successful benchrest rifle match. Paul and Tony are currently working with the board of directors to improve Polk County Gun Club’s rifle range and install target backers to get approval to hold IBS matches there.

If you would like to contact Paul to discuss the monthly Polk County Gun Club rifle matches or chat about general benchrest topics, send email to: paulhammer [at] bellsouth.net.

Photos by Jaime Hammer.

Permalink News No Comments »
November 8th, 2014

Remington Defense Secures Two Big Sniper System Contracts

Remington Defense has secured two major defense contracts for sniper rifles and chassis kits. First, the U.S. Department of Defense (DoD) has awarded Remington a contract to provide 443 Precision Sniper Rifles (“PSR”) chambered in .338 Lapua Magnum and 446 PSR caliber conversion kits in both .300 Winchester Magnum and .308 Winchester. The order was placed under the competitively awarded PSR Systems contract. The PSR is a sniper rifle system with modular barrel length and caliber conversion capabilities. Remington has commenced full production of the PSR after successful prototype and low rate initial production (LRIP) testing.

Remington PSR Sniper Rifle System
Remington defense socom PSR

The Remington PSR combines a user-adjustable folding stock, free-float handguard, and the potential to change barrel lengths and calibers within minutes.
Remington PSR sniper rifle socom dod

Marines Order Modular M40A6 Stocks
The U.S. Marine Corps Systems Command has awarded Remington Defense a contract to provide up to 2,000 modular stocks, spares, and magazines in support of the Marine’s M40 Sniper Rifle Modular Stock program. The stocks will be used to upgrade the Marines’ current M40A5 rifles. The new rifle system, designated the M40A6, features a folding stock plus full-length rails to hold optics and night vision systems. “We were excited to compete for and win this critical Marine Corps program,” said Greg Baradat, Director of U.S. Military Sales for Remington Defense. “The Marine Corps tested each bidder’s product to high standards, and we are proud to have exceeded their performance criteria.”

USMC Marine Corps m40 m40a6 Remington modular stock

USMC Sniper Rifle M40 PSR socom“We are proud to deliver the ultimate precision sniper systems on the planet,” said Greg Baradat, Director of U.S. Military Sales for Remington Defense. “The move to full rate production successfully demonstrates the quality, accuracy, and reliability of the system to our valuable Department of Defense customers.”

Permalink News No Comments »