Eurooptic vortex burris nightforce sale




teslong borescope digital camera barrel monitor


As an Amazon Associate, this site earns a commission from Amazon sales.









November 19th, 2014

Shocking Video: M1 Garand Explodes in Woman’s Hands (Squib?)

Here’s a shocking video showing a massive Kaboom (KB) that literally destroyed an M1 Garand in the hands of a lady shooter. One second she has a classic .30-06 battle rifle in her arms, and the next second she has nothing but a pile of parts. She is fortunate to have survived this incident without apparent serious injury. She may have had a squib (undercharged round) in her prior shot at the 00:12 time-mark. At 00:15 it seems she may have experienced “click no bang” (we can’t tell for sure). The detonation occurs at time-mark 00:25, and is then replayed in slow-motion.

M1 Garand kaboomIf this Kaboom wasn’t caused by a squib, there might have been a catastrophic failure of the cartridge that failed to fire at 00:15. The shooter herself, posting as ArizonaGirl24 on YouTube, thinks the gun may have fired out of battery. What do you think?

Text accompanying the posting of this video on LiveLeak, states: “A woman, her shooting partner, and their cameraperson are lucky to be alive. Her M1 Garand detonated after she failed to check the barrel for an obstruction due to an apparent squib round….

[After the shot at 00:12] she is obviously aware that something is amiss and seems to check the chamber, but does not unload the rifle to check for the presence of a barrel obstruction.

She raises the rifle and fires it again, causing a catastrophic weapon failure. Parts of the weapon fly in all directions. The video then terminates.”

What happened to the shooter? She reported: “I was very lucky with the outcome. I have lots of splinters and bruising, but nothing broken. My left hand took the brunt of the blow to my wrist and palm of my hand. Still pretty painful, but I will be fine.”

LESSON ONE: If you experience any kind of malfunction, or what appears to be a light-recoiling (or soft-sounding) shot, you should STOP shooting immediately. Clear the firearm and check for barrel obstructions.

LESSON TWO: Always wear ear and eye protection when shooting any firearm, even rimfires.

LESSON THREE: With a semi-auto gun, ensure the bolt is completely in battery after every shot.

LESSON FOUR: When hand-loading check EVERY round for powder charges prior to seating bullets, and weigh your loaded rounds before boxing them. Also check for high primers on EVERY round. If using a progressive press, use a Lock-Out Die that will alert you to any under-loaded cartridge. Be wary of commercial reloads.

Video tip from Mark LaFevers. We welcome reader submissions.
Permalink - Videos, Tech Tip 6 Comments »
November 19th, 2014

Remove Military Primer Crimp with Wilson Primer Pocket Reamer

Many shooters, particular those who shoot vintage military rifle matches, reload once-fired military cartridge brass. This brass may be high-quality and stout, but you may encounter a primer crimp* that interferes with the seating of a new primer. There are a variety of dedicated, military-crimp tools on the market, such as Dillon’s excellent Super Swage 600 tool that “rolls the crimp away”. But the Dillon tool costs $100.95 and takes quite a bit of room on your reloading bench. If you don’t want to drop a C-note and give up valuable bench space — here’s another (much cheaper) solution.

If you already have a Wilson case trimmer set-up, you can ream away those military crimps using an affordable Wilson accessory — the Primer Pocket Reamer (large #PPR-210, small #PPR-175). This $32.99 accessory is used in conjunction with a Wilson case trimmer and case-holder as shown below.

Military crimp primer pocket reamer

Military crimp primer pocket reamer salazarIn the older Riflemans Journal website, the Editor, “GS Arizona”, shows how to use the Wilson primer pocket reamer to remove military crimps on Lake City .30-06 cartridge brass. He explains: “The case goes into the Wilson case-holder, the same one used for case trimming, and the reamer replaces the trimmer head in the tool base. The threaded rod on the left side, which is normally used to regulate trim length has no use for this operation and it is simply backed out. Hold the case-holder as you turn the reamer into the primer pocket, it cuts easily and quickly. The reamer will stop cutting when the proper depth is reached.”

Military crimp primer pocket reamerMilitary crimp primer pocket reamer salazar

Do you really need to do this operation with military-crimped brass? Yes, and here’s why: “any attempt to prime the case without removing the crimp will simply result in a mangled primer that cannot be expected to fire and certainly won’t fire reliably.”

Read Full Article on Riflemans’ Journal Website (more photos and detailed write-up).

*Why does military brass has a primer crimp? GS Arizona answers: “The crimp is nothing more than an intentional deformation of the case around the primer pocket, the purpose of which is to retain the primer in the case despite high pressure situations in machine guns and other automatic weapons where a loose primer may cause a malfunction. As reloaders, our task is to get rid of the remnants of the crimp in order to allow re-priming the case.”

Permalink Bullets, Brass, Ammo, Reloading 3 Comments »