Eurooptic vortex burris nightforce sale




teslong borescope digital camera barrel monitor


As an Amazon Associate, this site earns a commission from Amazon sales.









May 31st, 2015

.300 WM Aussie Style — Most Popular 1000-Yard Benchrest Video

Here’s a true “Blast from the Past”, a video featuring our friend Stuart Elliott of Brisbane, Australia. This 2011 video has now racked up nearly 680,000 views, making it probably the most-watched long-range benchrest video ever uploaded to YouTube. The video shows Stuart shooting a 10-shot Heavy Gun string at the Brisbane range, Queensland, Australia, in July 2011. In this example, Stuart elected to “run a condition” with his big, .300 WM Heavy Gun, shooting fast with slight hold-off adjustments as the wind increased during the string. The cartridge is a .300 Winchester Magnum, loaded with moly-coated 190gr Berger VLDs. Stuart has an unusual bolt configuration. After each shot, Stuart removes the bolt completely with his right hand, and then uses the bolt to “shuck” the fired cartridge while loading the new cartridge with his left hand. That sounds awkward, but Stuart makes it all look easy. Stuart runs BRT Shooters Supply, a leading vendor of precision shooting equipment (including March scopes), in Australia and nearby regions.

Stuart Elliot BRT Shooters 1000 yards 1k benchrest march scope

Permalink - Videos, Competition 7 Comments »
May 31st, 2015

Join Our Shooters’ Forum — Now 28,000 Members Strong

AccurateShooter.com ForumThe AccurateShooter.com Shooters’ Forum hit another membership milestone. We’ve surpassed 28,000 registered members. Now we hope to reach 30,000 members in the next few months. If you have considered joining our Forum, but haven’t done so yet, there’s no better time than now. As a Forum member, you’ll be part of an active community of serious shooters. You can get valuable advice on shooting and reloading from top shooters such as National Champions Larry Bartholome, Sam Hall, and Derek Rodgers. As well, many top tool-makers and barrel-makers visit the Forum, such as Dave Kiff (PT&G), Frank Green (Bartlein Barrels), and John Perkins (21st Century Shooting). CLICK HERE to Register.

AccurateShooter.com Forum

(more…)

Permalink News No Comments »
May 30th, 2015

New High-Tech Chassis for 22 BR Varmint Rig

Eberlestock M2 Cobra rifle chassis stock

Machinist/gunsmith Paul Fakenbridge (aka “Boltfluter” on our Shooters’ Forum) recently completed an interesting upgrade to his favorite 22BR varmint rig. This rifle, Paul’s “Rock Chuck Killing Machine”, was originally fitted with an HS Precision fiberglass stock. Now Paul’s 22 BR sports new hardware — a sleek new Eberlestock M2 Cobra Chassis in “Dry Earth” color. The $995.00 M2 Cobra is a one-piece metal stock system that mounts a Rem-700 type action in a V-block. The cheekpad height and LOP are adjustable via spacers. The M2 Cobra uses AICS-type mags and can fit Picatinny rails on the side.

Eberlestock M2 Cobra rifle chassis stock

Check out the “Before” and “After” photos below…

(more…)

Permalink Gunsmithing, Hunting/Varminting 1 Comment »
May 30th, 2015

High Power Champ Carl Bernosky Explains How to Shoot Standing

Some folks say you haven’t really mastered marksmanship unless you can hit a target when standing tall ‘on your own hind legs’. Of all the shooting positions, standing can be the most challenging because you have no horizontally-solid resting point for your forward arm/elbow. Here 10-time National High Power Champ Carl Bernosky explains how to make the standing shot.

Carl Bernosky is one of the greatest marksmen in history. A multi-time National High Power Champion, Carl has won ten (10) National High Power Championships in his storied shooting career, most recently in 2012. In this article, Carl provides step-by-step strategies to help High Power shooters improve their standing scores. When Carl talks about standing techniques, shooters should listen. Among his peers, Carl is regard as one of the best, if not the best standing shooter in the game today. Carl rarely puts pen to paper, but he was kind enough to share his techniques with AccurateShooter.com’s readers.

If you are position shooter, or aspire to be one some day, read this article word for word, and then read it again. We guarantee you’ll learn some techniques (and strategies) that can improve your shooting and boost your scores. This stuff is gold folks, read and learn…


Carl Bernosky High PowerHow to Shoot Standing
by Carl Bernosky

Shooting consistently good standing stages is a matter of getting rounds down range, with thoughtfully-executed goals. But first, your hold will determine the success you will have.

1. Your hold has to be 10 Ring to shoot 10s. This means that there should be a reasonable amount of time (enough to get a shot off) that your sights are within your best hold. No attention should be paid to the sights when they are not in the middle — that’s wasted energy. My best hold is within 5 seconds after I first look though my sights. I’m ready to shoot the shot at that time. If the gun doesn’t stop, I don’t shoot. I start over.

2. The shot has to be executed with the gun sitting still within your hold. If the gun is moving, it’s most likely moving out, and you’ve missed the best part of your hold.

3. Recognizing that the gun is sitting still and within your hold will initiate you firing the shot. Lots of dry fire or live fire training will help you acquire awareness of the gun sitting still. It’s not subconscious to me, but it’s close.

4. Don’t disturb the gun when you shoot the shot. That being said, I don’t believe in using ball or dummy rounds with the object of being surprised when the shot goes off. I consciously shoot every shot. Sometimes there is a mistake and I over-hold. But the more I train the less of these I get. If I get a dud round my gun will dip.* I don’t believe you can learn to ignore recoil. You must be consistent in your reaction to it.

Carl Bernosky High Power5. Know your hold and shoot within it. The best part of my hold is about 4 inches. When I get things rolling, I recognize a still gun within my hold and execute the shot. I train to do this every shot. Close 10s are acceptable. Mid-ring 10s are not. If my hold was 8 inches I would train the same way. Shoot the shot when it is still within the hold, and accept the occasional 9. But don’t accept the shots out of the hold.

6. Practice makes perfect. The number of rounds you put down range matter. I shudder to think the amount of rounds I’ve fired standing in my life, and it still takes a month of shooting standing before Perry to be in my comfort zone. That month before Perry I shoot about 2000 rounds standing, 22 shots at a time. It peaks me at just about the right time.

This summarizes what I believe it takes to shoot good standing stages. I hope it provides some insight, understanding, and a roadmap to your own success shooting standing.

Good Shooting, Carl


* This is very noticeable to me when shooting pistol. I can shoot bullet holes at 25 yards, but if I’ve miscounted the rounds I’ve fired out of my magazine, my pistol will dip noticeably. So do the pistols of the best pistol shooters I’ve watched and shot with. One might call this a “jerk”, I call it “controlled aggressive execution”, executed consistently.

Permalink - Articles, Competition, Shooting Skills 4 Comments »
May 30th, 2015

World Record: Shotgunner Busts 3,653 Clays in One Hour

World Record Sporting Clays Shotgun Skeet Trap 3653 Guinness Dave Miller CZ-USA

Dave Miller, shotgun product manager for CZ-USA, recently set a Guinness World Record by hitting 3,653 clay targets in one hour. That’s one bird every 0.985 seconds for 60 minutes straight! Miller rotated through 30 shotguns, prepped by a team of assistants. In setting the new record at the first-ever Clays for Kids event, Miller raised more than $80,000 for Pheasants Forever and Quail Forever’s youth shooting programs.

Miller maintained an astonishing rate of sixty clays busted every minute. To achieve that rate of fire, Miller developed a special style of shooting, firing from the hip rather from the shoulder. He also had 24 helpers loading his arsenal of CZ semi-auto shotguns (which held up to 16 shells each). Miller told reporters: “I had 30 shotguns that I was using. There [were] 60 feet of tables with 5,000 shotgun shells on top of them. They would load them, and just pass them up here, I’d empty them and they’d go back in the assembly line”.

(more…)

Permalink - Videos, News 1 Comment »
May 29th, 2015

Bullet Concentricity and Related Issues

Sinclair concentricity 101 eccentricity run-out reloading plans

Sinclair International reloading toolsSinclair International has released an interesting article about Case Concentricity* and bullet “run-out”. This instructional article by Bob Kohl explains the reasons brass can exhibit poor concentricity, and why high bullet run-out can be detrimental to accuracy.

Concentricity, Bullet Alignment, and Accuracy by Bob Kohl
The purpose of loading your own ammo is to minimize all the variables that can affect accuracy and can be controlled with proper and conscientious handloading. Concentricity and bullet run-out are important when you’re loading for accuracy. Ideally, it’s important to strive to make each round the same as the one before it and the one after it. It’s a simple issue of uniformity.

(more…)

Permalink - Articles, Reloading 5 Comments »
May 28th, 2015

New Lever-Arm Precision Primer Press from Bullets.com

Bullets.com Grizzly Bald Eagle Precision Priming Primer tool press

Bullets.com has released a new, advanced handle-actuated primer seating device. Bullets.com President Shiraz Balolia tells us: “We have designed a new bench-mounted Bald Eagle Primer Press. It seats primers very consistently and you can adjust the depth of the primer in .002″ increments. I have been using one for months. In fact, I used it for the Canada win and also during the Nationals last year where our Team won the National Championships.”

Bullets.com Grizzly Bald Eagle Precision Priming Primer tool press

(more…)

Permalink Gear Review, New Product 8 Comments »
May 28th, 2015

Cortina’s Corner: ChargeMaster Tips (The Trickle Test)

Chargemaster tip Erik Cortina beep trickle Dandy Omega trickler Sartorius
Note that Erik has fitted a cartridge tip on his RCBS ChargeMaster’s dispensing tube.

Erik Cortina has been fiddling around with his RCBS ChargeMaster and he discovered something interesting. Through a series of tests he determined that the ChargeMaster dispensed slightly more precise charges when he trickled the last few 10ths of a grain on to the RCBS pan. Erik wasn’t expecting this result, but he confirmed there may be a slight benefit to this trickling method (as opposed to allowing the ChargeMaster to dispense the full charge).

We should note that Erik’s preferred method of weighing powder is to first dispense a slightly lower charge with the RCBS, transfer the pan to a laboratory-class Sartorius magnetic force restoration scale, then trickle up with his Omega (Dandy Products) Powder Trickler. However, if you don’t have a $800+ laboratory-grade scale, you might just try trickling on to the ChargeMaster pan. You can see Erik’s test procedure in this video:

(more…)

Permalink - Videos, Reloading 1 Comment »
May 28th, 2015

Tube TECH: How to Configure Eliseo Tubegun for Prone Shooting

Salazar tubegun

This 2010 story is reprinted at readers’ request.
In the past few years, tubeguns have really taken over in high power circles. At many matches you’ll see more tubeguns than conventional prone rifles, and a high percentage of those tubeguns will have been built using an Eliseo (Competition Machine) CSS chassis kit.

Step-By-Step Guide to Stock Set-Up
If you are a new tubegun shooter, or if you are planning a tubegun build this winter, our friend “GS Arizona” has prepared a comprehensive set-up guide for Eliseo tubeguns. Eliseo’s CSS chassis system affords a myriad of adjustments. Initially, one can be overwhelmed by all the variables: Length of Pull, Length to Sights, Length to Handstop, Cheekpad Height, Buttstock Offset, Buttstock Cant Angle, Handstop Angle, and Forearm Rotation.

Salazar tubegun

(more…)

Permalink - Articles, Competition 1 Comment »
May 27th, 2015

Forum Member Builds His Own High-Quality Front Rest

AKShooter front rest F-Class Dasher 6mm Alaska
AKShooter front rest F-Class Dasher 6mm Alaska

AKShooter front rest F-Class Dasher 6mm AlaskaYou have to admire someone with serious do-it-yourself skills. Not just hammer and nail skills, but formidable design and fabrication skills. Well Forum Member Dave D. (aka “AKShooter”) has a DIY skill set that might put some trained machinists to shame. You see, “DIY Dave” crafted his own pedestal front rest from scratch, using his own design and about $100.00 in materials (not counting the Edgewood front bag). Dave estimates he put 20 hours of labor into the project, but the end result was worth it: “This Do-It-Yourself rest drives like a dream. I’ve played with the Caldwell and a Sinclair, they have nothing on this one.”

Dave tells us: “Here is my Do-It-Yourself front rest. I wanted to show other folks who are handy that a solid front rest is doable with a bit of time — and you don’t need to spend $1000.00. (You could say this is a design for shooters with more time than money.) This is for F-Class. I was originally overwhelmed by the equipment needed, so I decided to make my own rest. I didn’t have the money for a SEB or Farley Coaxial. This is what I’ll run this season (my second as an F-Class competitor).”

(more…)

Permalink New Product, Tech Tip 5 Comments »
May 26th, 2015

Federal Legislation Restricting Online Ammo Sales Introduced

H.R. 2283 Ammunition online sales ban legislation congress Bonnie Coleman

Earlier this month, U.S. Representative Bonnie Coleman (D-N.J.) introduced a new bill, H.R. 2283, that would restrict online ammo sales. Coleman’s legislation, dubbed the “Stop Online Ammunition Sales Act of 2015″, would not ban online sales outright, but it would impose many restrictions and set up a Federal tracking system to “watch” ammo buyers. While H.R. 2283 would not cap the quantity of ammo someone could purchase, the legislation would impose numerous barriers to sale. Most notably, buyers would have to supply identification in person before the product could be shipped.

READ FULL TEXT of H.R. 2283 Restricting Online Ammo Sales

(more…)

Permalink News 9 Comments »
May 26th, 2015

Wet and Wild at 2015 TXRA Long Range Championship

Texas Rifle Association Long Range Championship Bayou Rifles

This Texas Rifle Association (TXRA) Long Range Championship was a match to remember. Despite rain threats, organizers decided to hold the match. On Friday, against the advice of the weather forecasters, the team match was held. The weather held out long enough to complete the match but over four inches of rain fell Friday night. This made for an interesting weekend as competitors had to park at the 300-yard line and shooters and gear had to be trailered to the 1,000-yard line.

TSRA LR Championship Photo Gallery | TSRA LR Championship Complete RESULTS

Texas Rifle Association Long Range Championship Bayou Rifles

(more…)

Permalink Competition, News No Comments »