January 16th, 2016

Corbin’s Curly Maple Masterpiece — .243 Win Prone Rifle

.243 Win 1000 yard Maple rifle

As a visual treat for our Daily Bulletin readers, we went back to our Gun of the Week archives to showcase a very special rifle. This humdinger could be the prettiest prone rifle we’ve ever seen. Commissioned for Forum member Corbin S., this is one handsome rifle, built with all-premium components and a stunning Curly Maple thumbhole stock with adjustable cheekpiece. The rifle is chambered in .243 Winchester. It features a custom stainless RBRP action Nesika R action, with keycuts in the bottom instead of recoil lug. A Grünig & Elmiger trigger has been specially modified (milled and pinned) to work with the Nesika action. The barrel is a 30″ Broughton 5R Palma-contour tube, and there is another 30″ Broughton 6BR barrel that Corbin uses at shorter ranges. The trigger guard, fore-arm rail, cheek adjuster, and 4-way adjustable butt assembly are all custom metal, designed by Dan Gleason. The stock is cut from exhibition-grade fiddleback maple (from Cecil Fredi Gunstocks in Las Vegas) with a Gaboon Ebony tip wood and butt-plate spacer.

.243 Win Maple rifle

Very Accurate with Fast-Flyin’ Berger 105s
Corbin tells us the gun will put five shots into the size of a quarter at 300 yards “when he does his part.” Corbin shoots pointed Berger 105gr VLDs and 45.5 grains of H4831SC. That load runs 3180 fps. He can push it faster, but “that’s where the node was and where it shoots best”, according to Corbin.

Forum member Jim Hardy has seen (and shot against) this beautiful rifle. He reports:

“A casual observer might think that the trigger guard, cheek plate and butt plate hardware are Anschutz — as the stock takes on the Anschutz prone pattern. However, this is ALL custom metal. The G&E trigger breaks like a glass rod and will makes my BR triggers feel inferior at best. I had the pleasure of holding, shouldering, and lusting over this gun at Camp Perry last year, and it is even more impressive in person. The killer is that there is yet ANOTHER one in a beautiful, dark figured walnut owned by Corbin’s shooting partner. BTW, both guns will hammer at 1000 yards prone.”

.243 Win 1000 yard Maple rifle
.243 Win 1000 yard Maple rifle

Permalink Competition, Gunsmithing 1 Comment »
January 16th, 2016

Getting Down to the Nitty-Gritty — How to Clean Your AR

AR15 AR-15 gun cleaning maintenance

AR-platform rifles can be maintenance-intensive beasts. But some AR owners make the situation worse by not regularly cleaning important small parts, or by using too much oily/greasy lubricants in the wrong places. A properly maintained and lubricated AR15 can shoot hundreds of rounds (between cleanings) without a problem. If you learn where (and where not) to apply lubricant, you’ll find that your AR will run more reliably and the task of cleaning the bolt and bolt carrier will be less of a burden.

Here is a good video that explains AR-15 Cleaning and Maintenance. In this 30-minute NSSF video, Gunsite Academy instructor and gunsmith Cory Trapp discusses the proper way to clean and maintain the AR-15 carbine. Very knowledgeable, Trapp provides rock-solid advice for AR owners. Along with cleaning producedures, this video explains how to inspect key components and how to function-test your AR before each shooting session.

AR15 AR-15 gun cleaning maintenance

AR15 AR-15 gun cleaning maintenance

AR15 AR-15 gun cleaning maintenance

Permalink - Articles, - Videos No Comments »