February 23rd, 2016

Caddy-Hack: Build Your Own Ammo-Holder for under $10.00

Flex Arm Flexible Port Level gooseneck Ammo Block caddy

Here’s a great Do-It-Yourself (DIY) project from Martin Tardif. Build your own height-adjustable ammo caddy for under ten bucks. This is a great project for F-Open competitors as well as anyone who shoots with a pedestal front rest, either on the ground or from a bench. The ammo caddy attaches, via a flexible arm, to your front rest. The flexy arm allows you to position your ammunition close to your rifle’s feeding port. That makes it easy to grab cartridges and load them into the chamber without shifting your shooting position. Nice job Martin! The total cost of the whole project, according to Martin, was just $8.00!

Martin Explains How to Build the Ammo Caddy
Here are some pics of my DIY P.L.A.B. (Port Level Ammo Block). I cannibalized the goose neck from a Craftsman bendy-style utility light and bought a 3.5″x 1″ Acetal disk on eBay. I then drilled out the disk to accept twenty .284 Winchester rounds and screwed the disk to the bendy arm. The arm, by itself, wasn’t sturdy enough to support my fully loaded ammo block, so I inserted a 1/8″-diameter steel rod cut to length into the arm before I screwed it to the disk. On this Bald Eagle rest, I wasn’t using the windage adjustment cable. That allowed me to secure the bottom end of the arm to the unused 5/16″ x 18 bolt hole for the cable. [Editor’s Note: For other pedestal rest types/brands you may need to drill a hole for the base of the flexy arm.]

Flex Arm Flexible Port Level gooseneck Ammo Block caddy

Similar Posts:

Tags: , , , ,