April 5th, 2016

New Federal Syntech Ammo with Polymer-Encased Bullets

Federal American Eagel Syntec polymer encased bullet

Federal Ammunition is releasing a new line of range ammunition with polymer-encased projectiles. American Eagle Syntech is the first range-specific factory-loaded ammunition designed to reduce fouling and extend barrel life with a high-tech polymer bullet coating plus specially-formulated clean-burning powders. The potential for reduced wear and fouling is real — when tested against conventional FMJ ammunition, Federal claims Syntech produced an average of 12% less barrel friction and 14% less heat. Also, since Syntech bullets lack a metal jacket, there is less chance of ricochets on steel targets. Initially, three (3) types of Syntech ammo will be offered: 9mm Luger (115 grain); 40 S&W (165 grain); and .45 ACP (230 grain).

Federal American Eagel Syntec polymer encased bullet

For years this Editor has loaded his .45 ACP and .44 Mag handguns with polymer/moly matrix-coated bullets from Precision Bullets in Texas. Those poly/moly-encased lead bullets shot VERY accurately and I found that my barrels fouled much less than with conventional lead bullets. Likewise, there was much less cylinder fouling on my revolvers. If the American Syntech bullets work as well as those Precision bullets, I think the Syntech line will be a winner. Syntech bullets should benefit any shooter who frequents a range where lead ammo is not allowed.

Features & Benefits
• Polymer-encapsulated Syntech bullet prevents metal-on-metal contact in the bore, eliminating copper and lead fouling, while extending barrel life.
• Exclusive primer formulation provides reliable, consistent ignition.
• Clean-burning propellants minimize residue and fouling.
• Significantly reduces the required frequency of cleaning.
• Absence of a copper jacket minimizes splash-back on steel targets.

Federal American Eagel Syntec polymer encased bullet

Similar Posts:

Tags: , , , , , , ,