June 22nd, 2016

2016 Shaping Up as Record-Breaking Year for Gun Sales

NICs Firearms background checks Statistics

The recent Orlando terror attack has sent Americans to gun stores in droves. Prompted by concerns for self-protection (as well as proposed new gun control laws), Americans are buying more guns — all types of guns. This reflects a general trend over the past few years. In fact, it looks like 2016 will see the highest number of gun sales in American history. Based on FBI background check data, it appears that 2016 will set new records for gun sales, with nearly 17 million new guns sold. By the end of the year it is projected that Americans will own 405 million firearms — over 1.25 guns per capita*.

Record-Setting Gun Sales in 2016
by Dean Weingarten, Gunwatch.
In 2016, Americans continue to break records for gun sales. While the National Instant Check System (NICS) does not track gun sales directly, the numbers are highly correlated. The numbers of NICS checks, and the increase in private firearms, have skyrocketed during the Obama administration.

It is possible, even likely, that 2016 will reach over 28 million instant checks. If we reach 28 million instant checks in 2016, that will be about 16.8 million new firearms added to the stock in 2016 [roughly 40% of NICS checks are for “previously owned” guns]. That projection puts us at 405 million private firearms in the United States at the end of 2016.

The total for 2016 (through the end of May) is 11,698,006 instant checks. That is more than the entire year of 2007, which held the record up to that year. Thus, during the Obama years, the number of private firearm sales has doubled. In 2015, the highest year on record, the total number of checks was 23,141,970. 2016 is shaping up to break the 2015 record by millions of instant checks.

May 2016 had the most instant checks of all the months of May on record. That makes 13 months in a row that have broken records for all previous years. If the trend continues, 2016 will reach the record numbers of 2015 by the end of October, with the busy months of November and December still ahead.

©2016 by Dean Weingarten, Gunwatch. Permission to share is granted when this notice is included.


*The USA has an estimated population of 322,762,018 according to a 2015 end-of-year estimate from the U.S. Census Bureau. Source: USNews.com.

Permalink News 1 Comment »
June 22nd, 2016

New Lyman Cyclone Rotary Tumbler with Dual Media Separators

Lyman Cyclone stainless media tumbler rotary brass cleaning cleaner

If you’re the kind of guy who likes to get his brass shiny inside and out, then wet-tumbling with stainless media gets the job done. For heavy-duty wet-tumbling jobs, it used to be that you had to buy a Thumler’s Tumbler and then figure out your own solution for media separation. Now there are other options on the market which may be more convenient for many users.

Lyman has just introduced its Cyclone Rotary Tumbler. For under $190.00 on Amazon.com, this ships as a complete system with everything you need — even the stainless media and media separators. The Tumbler unit itself holds up to 1000 pieces of .223 Rem brass and features a rubber lining to protect your cases and reduce noise during operation.

Conveniently, a built-in timer can be set from 0 to 3 hours, shutting off automatically. The drum features a large, screw-on end-cap to allow easy loading and unloading. In addition, the tumbler comes with two special sifter pans that make it easy to separate pins from brass. Simply empty the tumbler into the stacked pans. The first pan catches the brass, while the second, finer screen pan catches the pins. Very clever. The Cyclone Tumbler system ships with five pounds of stainless media pins and a sample packet of Brass Cleaning Solution.

Video shows Lyman Cyclone wet tumbling system in action:

Lyman Cyclone stainless media tumbler rotary brass cleaning cleaner

TECH TIP: Wet-tumbling brass with stainless media really works. With enough “run-time” the process will definitely remove stubborn carbon on the inside of cases. However, some folks observe that case-mouths can occasionally get peened during the process. This is not a big deal but it is worth noting. In addition, with large flash-hole cases, it is possible (though rare) for a pin to stick in a flash hole. Therefore you should inspect every case before loading in a progressive press or bulk-priming cases with a bench tool.

Permalink Bullets, Brass, Ammo, Gear Review, New Product 1 Comment »