June 27th, 2016

AMP Induction Annealing Machine Review by Bill Gravatt

Annealing Made Perfect New Zealand Anneal Annealer Induction Review Pilot Findlay Bill Gravatt Gear Review Product Test

Annealing Made Perfect (AMP) Annealing Machine Review

Review by Bill Gravatt
Annealing Made Perfect New Zealand Anneal Annealer Induction Review Pilot Findlay Bill Gravatt Gear Review Product TestI had been following the progress of Alex and Matt Findlay with Annealing Made Perfect for almost three years as they pursued making the best annealing product for the private reloading market. The short explanation of why we anneal brass is to return the brass to a softer and consistent hardness after the brass has work-hardened from repetitive firing and sizing. As the President/co-owner of Sinclair International for over 21 years I saw a lot of products come through our doors that annealed brass but these products always seemed like they had very little supportive data and research behind them. Most of them were based on some type of torch system. The New Zealand-based father/son team of Alex and Matt spent these past three years addressing the challenging questions about annealing:

- What is the correct temperature to reach when annealing?
– How long should you take to get to that temp and how long should you remain there?
– How frequently should you anneal?
– Can you ruin your expensive brass?
– How do we make the process repeatable for the handloader?
– How do you accurately measure the case hardness?

They worked closely with the Electrical Engineering Department at the local University of Technology and invested a lot of capital into detailed metallurgical research. Their decision to use induction heating was because of its repeatability and the ability to reach exacting and consistent temperatures. Induction annealing is achieved by placing the cartridge in a magnetic field thereby inducing eddy currents within the brass and heating the brass without contacting the brass physically. To learn more, I suggest you visit the AmpAnnealing.com website. It is very informative.

Why should you anneal? If you are just a casual reloader, than annealing isn’t necessary but if you a serious wildcatter or competitive shooter you may want to consider it. More and more competitive shooters anneal their cases (not necessarily for adding life to the cases) to achieve more consistent pressures and velocities.

My first favorable impression was received by just opening the extremely well-packed shipping box. You could tell these guys take a great deal of pride in their product. The unit comes with three cartridge-specific pilots (you decide on which pilots), a shellholder collet, a power cord, a thorough, well-written, easy to follow instruction manual, and a USB cord for future software updates.

Annealing Made Perfect New Zealand Anneal Annealer Induction Review Pilot Findlay Bill Gravatt Gear Review Product Test

This machine is so easy to use that I was up and running within a few minutes. All I had to supply was the shells, the correct shell-holder and an aluminum pan to drop the hot cases into. I started annealing some unturned .308 Winchester cases (Lapua headstamp) that had four firings. First I screwed the pilot for .308 cases (#11) into the machine, placed my .308 shellholder into the supplied shellholder/collet and turned the power on. The display fired up right away and soon registered the program level that the machine was set to.

Annealing Made Perfect New Zealand Anneal Annealer Induction Review Pilot Findlay Bill Gravatt Gear Review Product Test

Since the machine uses induction heating, you need to set the heating level for the correct setting for the brass you are using. The alloy being used isn’t as important as the thickness or amount of brass in the neck and shoulder region. For example, Lapua and Norma have more brass in that area so the setting would be higher for these brands than Winchester brass. Also, if you have neck-turned brass, the setting would be reduced from the standard setting because there would be less mass in the air gap.

This manufacturer-produced video shows how the AMP annealing machine operates:

The settings are obtained by referring to the “Settings” section on the AMP website and are broken out by cartridge, brand, standard unturned cases, and then neck-turned cases with various amounts of wall thickness removed. A great service that AMP provides to the handloader is that you can send sample cases of your brass to them (U.S. location in Wolcott, Indiana) and they will test the hardness for you and send you the exact setting for your specific lot of brass.

My setting for unturned Lapua .308 Winchester brass was “92”. The buttons on the front of the machine allow you to adjust the setting quickly. After you set the program number, the setting is locked in after the first use until you change it again. I placed the first case in the shellholder, lowered the assembly down through the pilot and into position. I then hit the start button which illuminated immediately and then about 6 to 7 seconds later, the light went off signaling that heating was completed.

Annealing Made Perfect New Zealand Anneal Annealer Induction Review Pilot Findlay Bill Gravatt Gear Review Product Test

Now, be aware, these cases are extremely hot. I lifted the case out using the shellholder/collet and then dropped it into my aluminum pan. I then placed another case into the holder, put it into the machine and then repeated the process. Once I got the coordination down, I did 100 .308 Win cases in about 24 minutes. I did some 6mmBR cases later (Lapua) and annealed 100 cases in about 15 minutes at the “75” setting. I found myself raising my shop stool a little higher than normal so I was at a comfortable height in relationship to the top of the machine. Very easy to do — I actually had a student do a few cases with me and she had no problem at all following the instructions.

Annealing Made Perfect New Zealand Anneal Annealer Induction Review Pilot Findlay Bill Gravatt Gear Review Product Test

Annealing Made Perfect New Zealand Anneal Annealer Induction Review Pilot Findlay Bill Gravatt Gear Review Product Test

There is a thermal cut-off that prevents the machine from overheating. Depending on the setting, this can occur after 20 to 35 minutes of continuous use. When this has occurred, simply leave the machine on and the fans will cool it down so you can resume annealing. This isn’t surprising considering the amount of heat being generated.

All in all, I found this machine extremely easy to setup and operate. Now, does it work? I have test batches of brass that I am going to run over the chronograph in 10-round strings. I plan on running at least 10 strings of annealed brass and 10 strings of unannealed brass out of the same lot, same number of reloadings/firings and out of the same gun. I plan on alternating annealed strings and unannealed strings with a cooling off period every 20 rounds. When I do testing, I have my wife pre-label my batches as Batch A and B so I won’t know what rounds I am shooting until I get back from the range. I’ll make the results available as soon as I can. My expectation is that velocities will be more consistent based on my understanding of the lab results that the Findlays have achieved with their Annealing Made Perfect machine. For more information, visit their website at AmpAnnealing.com.

Permalink Gear Review, New Product 7 Comments »
June 27th, 2016

Bargain Finder 41: AccurateShooter’s Deals of the Week

Accurateshooter Bargain Finder Deals of Week

At the request of our readers, we provide select “Deals of the Week”. Every Monday morning we offer our Bargain selections. Here are some of the best deals on firearms, hardware, reloading components, and shooting accessories. Be aware that sale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.

1. Bullets.com — 6mm Dasher Brass from Norma

NRA Life Membership Offer

It’s finally here, ladies and gentlemen — factory-made Dasher brass. That means no more fireforming! This 6mm Dasher brass has been custom crafted by Norma exclusively for Bullets.com. A special blend of brass together with special treatment of the primer pockets has produced casings that will last for many firings under normal use. The necks have been specially lengthened and are .290″ from shoulder. Overall length is 1.598″ and neck walls are approximately .013″ thick. Available in packs of 100 ($109.95) or 500 ($529.95).

NOTE: This extra-sturdy brass has a thicker rim which may not work in your standard shell holder. Custom shell holder item BL12100 is designed to accommodate the heavy rim of these cases.

2. CDNN Sports — 1911-Type .22 LR Target Pistol

GSG German model 1911 .22LR Rimfire pistol handgun

Everyone should have an accurate .22 LR target pistol. This German-made GSG 1911 22LR pistol shares the look, feel, and ergonomics of J.M. Browning’s classic model 1911 so it’s good for cross-training. We’ve tried this pistol and the trigger is pretty darn good — though don’t expect it be be as nice as a S&W Model 41. But consider that the GSG costs just $249.99. By contrast, MSRP on a new Model 41 is a steep $1369.00. For cross-training and target work the GSG is a very good value.

3. Monmouth Reloading — Sig Sauer Kilo 2000 LRF, $499.00

NRA Life Membership Offer

This excellent laser rangefinder rivals other premium LRFs selling for hundreds more. Head-to-head field tests with Leica, Zeiss, and Swarovski LRFs proved that the new Sig Sauer Kilo 2000 can play in that league, but at a much more affordable price point. Sig accomplishes that with tight beam divergence and state-of-the-art DSP technology which allows the Kilo 2000 to range faster (and more reliably) at longer 
distances. Optic magnification is 7X. The Kilo 2000 weighs 7.5 oz and measures 3″ x 4.2″ x 1.3″.

SAVE MORE: Right now you can save an additional $110 off every Rangefinder Monmouth Reloading sells, including the Sig Kilo 2000. To save an additional $110, use Coupon Code LRF 110. That will lower your cost to $389.00 for the Kilo 2000, which is a total steal. (Time-Limited Offer!)

4. Cabelas.com — Rock Chucker Supreme Reloading Kit

Deals of Week RCBS Rock Chucker Supreme Kit

Everything you see above can be yours for just $225.00, after manufacturer’s rebate. Right now, Cabela’s is selling the Rock Chucker Supreme Master Reloading Kit for $300.00. That’s a good deal as this Reloading Kit sells elsewhere for up to $360.00. But he’s the real incentive — if you spend $300.00 on RCBS products in 2016, RCBS will send you a $75.00 rebate. With that REBATE, your net cost is just $225.00 for the entire Kit.

5. Amazon — Motorola Walkie Talkies, $42.56 per Pair

Deals of Week Motorola Walkie Talkie Radio Weather Channel

Walkie-Talkies are “must-have” items for long-range shooting. The 22-CH Motorola MH230R Two-Way Radio is Amazon’s #1 Best Seller in FRS/GMRS Handheld Radios. This under-$45.00 set offers 22 channels with a claimed range up to 23 miles (We’ve used them and they worked at 3 miles line of sight). The kit includes: 2 radios, 2 belt clips, 1 dual drop-in charger, 1 charging adapter, 2 NiMH rechargeable battery packs. Run-time is about 10 hours — plenty for a full day of shooting. There is also a newer version, the Motorola T260 for $59.00.

6. Amazon — Nikon 1-4x20mm M-223 Scope with BDC, $212.46

Deals of Week Nikon 1-4x20mm M-223 Optic Scope CMP Service Rifle

Under the CMP’s new Service Rifle Rules, you can use an optic with up to 4.5X magnification and 34mm objective. If you have money to burn, you could purchase the excellent new Nightforce 4.5x24mm SR scope for $1950.00. Or, if you would rather put your money into barrels, bullets, and brass, you can spend a whole lot less. This little Nikon 1-4x20mm M-223 can do the job and right now it’s on sale for under $215.00! You could buy NINE of these Nikons for the price of one Nightforce SR. That certainly makes you think about priorities.

7. Grafs.com — NEW Nikon Wind Meter for SmartPhones, $28.99

Nikon spot on smart phone wind meter Ballistics App

Here’s a great new gadget for under $30.00. Nikon’s new Spot On™ Ballistic Wind Meter plugs directly into the headphone port on most popular smart phones. The Spot On Wind Meter reads both wind speed and direction and inputs the data directly into Nikon’s free Spot On Ballistics Mobile App (available for iOS and Android). This allows you to quickly determine and calculate wind drift corrections without needing a separate, dedicated wind meter. When not in use, the Nikon device easily fits in a pocket.

8. Amazon – Frankford Arsenal Master Tumbler Kit, $56.65

Master tumbler reloading kit Frankford Arsenal

This Master Tumbler Kit contains everything you need to tumble rifle or pistol brass. Now on sale for $56.65, this Kit contains: Vibratory Tumbler, Rotary Media Separator, Plastic Bucket, 3 lbs. Cleaning Media, and 4 oz. Brass Polish. This product has received excellent reviews from verified purchasers.

Permalink Hot Deals, New Product 1 Comment »
June 27th, 2016

The Amazing 6mm Dasher: 10 Shots in 4.554″ at 1000 Yards

Scott Nix Dasher Record

6mm DasherHow well can the 6mm Dasher perform at 1000 yards when conditions are good, and the shooter is riding a hot streak? Well here’s a shot-by-shot record of Scott Nix’s 4.554″ 10-shot group shot at Missoula, Montana at the Northwest 1000-yard Championship a few years back. All 10 shots were centered for a 100-6X score. That’s about as good as it gets. If Scott had stopped after 5 shots, his group would have been under 3 inches!

Video Demonstrates Amazing 1000-Yard Accuracy
Watch the video. You can see the group form up, shot by shot. It’s pretty amazing. Scott’s first shot (at the 45-second mark of the video) was right in the X-Ring, and four of Scott’s first five shots were Xs. That’s drilling them! This video was recorded from the pits at the 1000-yard line, during record fire.

Permalink - Videos, Competition 2 Comments »