April 30th, 2017

Ruger Offers Integrally Suppressed Barrel for 10/22 Rifles

Integrally suppressed barrel .22 LR rimfire 10/22 takedown ISB Silent SR

Even seen an integrally suppressed rifle? Ruger offers this technology with its new Silent-SR ISB, a multi-baffle integrally suppressed barrel (ISB) for Ruger 10/22 takedown models. This system reduces sound levels to an average of 113.2 dB with standard velocity ammunition. That’s very impressive — consider that an unsuppressed .22 LR firearm can produce noise levels as high as 140 dB with standard velocity ammunition. That’s well above the threshold where irreversible hearing damage begins. (Source: NC Silencers).

Even if you are not interested in a suppressed rimfire rifle (or live in a state where suppressors are forbidden) we think you’ll be interested in Ruger’s technology. The Silent-SR employs a long, multi-element “baffle stack” that can be easily removed for cleaning.

Integrally suppressed barrel .22 LR rimfire 10/22 takedown ISB Silent SR

Watch Integrally Suppressed Barrel in Action. CLICK HERE to View Video on Ruger Site. Scroll to bottom of Ruger page after jump!
Integrally suppressed barrel .22 LR rimfire 10/22 takedown ISB Silent SR

Here’s what Ruger says about its new ISB (Integrally Suppressed Barrel) for the 10/22 Take-down:

The Silent-SR ISB quickly and easily assembles to any Ruger 10/22 Takedown or 22 Charger Takedown, and features an induction-hardened breech with cold hammer-forged barrel that provide easy takedown and accurate return-to-zero.

Reducing sound pressure levels of .22 LR to an average of 113.2 dB with standard velocity ammunition, a 10/22 Takedown rifle equipped with the Silent-SR ISB is as quiet as a bolt-action rifle with a thread-on silencer. The relatively long barrel of the Silent-SR ISB (compared to other integral suppressors) means the bullet generates energy near that of a 16″ gun for consistent, accurate and effective performance on target. The pushed-cone baffle geometry has been stretched to utilize the volume under the barrel maximizing suppression of the gunshot without disturbing the travel of the bullet.

Integrally suppressed barrel .22 LR rimfire 10/22 takedown ISB Silent SR

Disassembly for cleaning is as simple as separating the barrel from your firearm and loosening the Silent-SR ISB’s single assembly screw using the included 5/32″ hex key tool. Once loose, pull the screw to remove all six 17-4 stainless steel baffles, spacer and front cap free of the sleeve for cleaning. The sealed baffles keep the fouling away from the serialized sleeve, yet easily come apart even after thousands of rounds. Finished with Cerakote, the Silent-SR ISB is engineered and built for a lifetime of hard use without clogged ports, seized components or loss of suppression that often plague other integrally suppressed rimfire barrels.

Permalink Gear Review, Gunsmithing, New Product 3 Comments »
April 30th, 2017

New Steyr Scout RFR Rimfire Rifle with Straight-Pull Action

Steyr Arms Rimfire Scout Rifle .22 LR, .22 WMR, 17 HRM straight pull action

Steyr Arms has introduced a new straight-pull rimfire rifle that should work well for rimfire practical/tactical games, cross-training, and varmint hunting. Available in three chamberings, .22 LR, .22 WMR, and .17 HMR, the new Steyr Scout RFR emulates the look of a Scout Rifle, but in a rimfire platform. This rifle, which first appeared in 2016 in Europe, made its American debut at the NRA Annual Meetings in Atlanta this week.

Steyr Arms Rimfire Scout Rifle .22 LR, .22 WMR, 17 HRM straight pull action

Frankly, we don’t need or want the extended forward-mounted rail, because we would use a conventional higher-magnification optic, rather than a long-eye-relief scout scope. But we are excited about the straight-pull action, 10-round magazine, and nicely-designed stock that should be good for tactical comps. For mounting conventional scopes, an integrated 3/8-inch dovetail base runs the full length of the receiver’s topside, and the RPR comes with Weaver bases mounted on the top of the receiver. MSRP is $599.00.

Detail showing ISSC Biathlon-style SPA straight-pull action with trigger-guard safety.
Steyr Arms Rimfire Scout Rifle .22 LR, .22 WMR, 17 HRM straight pull action

Based on the proven, biathlon-inspired SPA action built by Austrian gun-maker ISSC, the Steyr Scout RFR was designed as an economical, minimal-recoil trainer. Available in .22 LR, .22 WMR, and .17 HMR, the Scout RFR has a smooth, straight-pull action allowing for fast cycling with the provided 10-round magazine. Check out the video below to see how the action works. Trigger pull weight is 3 lbs, 4 oz., about right for tactical games. We might want a slightly lighter trigger for varmint work with the .17 HMR version. In fact, we think this might make a great “squirrel gun” in .17 HMR.

The Scout RFR’s Eloxal-coated aluminum receiver secures a 20″ heavy-contour barrel. Both the .17 HMR and .22 LR barrels are 1/2-20 UNF threaded for attachments, while the .22 WMR barrel is unthreaded. The Scout RFR measures 35.6 inches long, and it weighs 7.3 pounds without optics. An optional knife stows in the stock, and standard Steyr SBS/Scout buttplate spacers can used to adjust length-of-pull. Included accessories: Owner’s manual, two Weaver adapters, and one 10-round magazine.

Model: Steyr Scout RFR

Chamberings: .22 LR, .22 WMR, and .17 HMR
Action: Straight-pull, biathlon-style SPA action by ISSC
Magazine type/capacity: 10-round detachable steel box
Receiver material: Hard Eloxal-coated aircraft aluminum
Barrel: 20.1-inch heavy barrel
Sight Mounts: 30-slot Picatinny rail + 3/8″ dovetail on receiver with two Weaver adapters
Trigger Pull weight: 3 pounds, 4 ounces
Stock Length of pull: 13.4 inches, adjustable with spacers
Recoil pad: Elastomer 0.3″ thick
Weight, empty: 7.3 pounds
Overall length: 35.6 inches
MSRP: $599

Permalink Hunting/Varminting, New Product, Tactical 3 Comments »
April 30th, 2017

Wind Wizardry for Varminters — Keep the Wind at Your Back

Varmint Hunting varmint safari wind war wagon trailer longmeadow game resort
This impressive war wagon hauls varmint hunters around the Longmeadow Game Resort in Colorado.

When you’re on a varmint expedition in the Western states you can bet, sooner or later, you’ll encounter serious winds. Here’s some advice on how to minimize the effects of cross-winds on your shooting, and easily improve your percentage of hits. In essence, you want to use your ability to change shooting positions and angles to put the wind behind you.

A benchrest or High Power shooter must operate from a designated shooting position. He must stay put and deal with the wind as it moves across the course, from whatever direction it blows. By contrast, a varmint hunter can move around and choose the spot that provides the most favorable wind direction. In most cases you’ll get the best results by moving your shooting position so the wind is at your back. This will minimize horizontal wind drift. Once you’re in position, use wind flags to direct your fire in line with the prevailing winds. A varminter who calls himself “Catshooter” explains:

The String of Death
I remember the first time I was on a dog town in the Conata Basin, in the Badlands area of southwestern South Dakota. Along with two other guys, I drove out for 21 days of shooting, and I never saw wind like that before. If all four tires of our vehicle were on the ground, the weather man said these were “mild wind conditions”.

After the first four or five days, we got smart. We would park the truck on the up-wind side of the town so the wind was at our back. Then we took a piece of string on a 3-foot stick, and set it in front of the shooters, and let the string point at the mounds that we were going to shoot.

For the rest of the trip, we didn’t have to deal with wind drift at all. We just shot the dogs that the string pointed to. We started calling our simple wind pointer the “String of Death”.

We were hitting dogs at distances that I would not repeat here (with benchrest grade rifles). After the first time out, I always took a wind rig like that.

Photos by Chris Long, taken during Chris’s Wyoming Varmint Hunt with Trophy Ridge Outfitters.

Permalink Hunting/Varminting, Shooting Skills 3 Comments »
April 29th, 2017

Sinclair Int’l Offers 8-Part Series of Reloading Videos

free reloading videos sinclair international

Sinclair International has created a series of instructional videos illustrating the basics of metallic cartridge reloading. The 8-part series starts with reloading basics and provides step-by-step, how-to instructions that will help new reloaders get started. Detailed, animated illustrations show you what happens inside the chamber when shooting, and inside the dies during each step of reloading. The videos can be viewed on Sinclair Int’l’s YouTube page. Shown below is the first video in the series:

Each of the eight videos is hosted by Sinclair Int’l President Bill Gravatt. Bill doesn’t just show you “how”, he tells you “why”. The how-to segments cover case inspection, proper die set up, case sizing, primer installation, powder measuring, bullet seating, crimping, and even goes into the record keeping needed for the handloader. “We wanted to give shooters who haven’t reloaded a look at all the advantages of creating your own ammo and how easy it is to get started,” said Gravatt, “without telling them they had to have any certain brand or type of equipment to do the job.” The eight videos are:

Part 1 — Intro to Video Series
Part 2 — Intro to Reloading Safety
Part 3 — Metallic Cartridge Components
Part 4 — The Firing Sequence
Part 5 — Tools for Reloading
Part 6 — Loading Bottle-Neck Cartridges
Part 7 — Loading Straight Wall Cartridges
Part 8 — Reloading Series Conclusion

Reloading Tools
Shown below is Part 5 of the video series, covering the tools used for precision reloading.

Permalink - Videos, Reloading, Tech Tip No Comments »
April 29th, 2017

Gun Talk Radio Live at NRA Convention on April 30th

Tom Gresham Gun Talk Radio NRA Annual Meetings and Exhibits Atlanta Georgoa

Tom Gresham’s Gun Talk Radio broadcasts live from the NRA Annual Meetings in Atlanta, GA, this Sunday, April 30th, from 2:00 pm to 5:00 pm Eastern at the FN America booth, #2429. Show visitors are encouraged to stop by the FN booth to “watch” the radio show.

Guests will include Brownell’s Pete Brownell, Jason Parker (four-time Olympian turned Olympic Coach), Ashley Hlebinsky (curator of the Cody Firearms Museum), and FN America’s Tom Scott with details on the new FN 509 pistol.

Second NRA Convention Episode Will Air on May 7th, 2017
And since there’s always so much to talk about, Gun Talk will also be broadcasting from the Ruger booth, #3142, the day before, on Saturday, April 29th, from 10:00 am until 1:00 pm Eastern. That show will be delayed to air next Sunday, May 7th.

The 146th NRA Annual Meetings and Exhibits at the Georgia World Congress Center is open to the public and free for NRA Members. From April 28th through April 30th, participants can attend auctions, raffles and seminars, check out displays from 800+ exhibitors, and talk with other gun enthusiasts and shooters from all over the world. More information can be found at www.nraam.org.

In its 23rd year of national syndication, Tom Gresham’s Gun Talk® radio show airs live on Sundays from 2 PM to 5 PM Eastern, and runs on more than 230 stations weekly. Listen live on a radio station near you (http://guntalk.com/stations), or via live streaming (http://guntalk.com/streaming). All Gun Talk shows can also be downloaded as podcasts at http://www.guntalk.libsyn.com, or Apple iTunes.

Permalink News No Comments »
April 29th, 2017

Do-It-Yourself Adjustable Ammo Caddy (Under $10.00)

Flex Arm Flexible Port Level gooseneck Ammo Block caddy

Here’s a great Do-It-Yourself (DIY) project from Martin Tardif. Build your own height-adjustable ammo caddy for under ten bucks. This is a great project for F-Open competitors as well as anyone who shoots with a pedestal front rest, either on the ground or from a bench. The ammo caddy attaches, via a flexible arm, to your front rest. The flexy arm allows you to position your ammunition close to your rifle’s feeding port. That makes it easy to grab cartridges and load them into the chamber without shifting your shooting position. Nice job Martin!

Martin Explains How to Build the Ammo Caddy
Here are some pics of my DIY P.L.A.B. (Port Level Ammo Block). I cannibalized the goose neck from a Craftsman bendy-style utility light and bought a 3.5″x 1″ Acetal disk on eBay. I then drilled out the disk to accept twenty .284 Winchester rounds and screwed the disk to the bendy arm. The arm, by itself, wasn’t sturdy enough to support my fully loaded ammo block, so I inserted a 1/8″-diameter steel rod cut to length into the arm before I screwed it to the disk. On this Bald Eagle rest, I wasn’t using the windage adjustment cable. That allowed me to secure the bottom end of the arm to the unused 5/16″ x 18 bolt hole for the cable. [Editor’s Note: For other pedestal rest types/brands you may need to drill a hole for the base of the flexy arm.]

Flex Arm Flexible Port Level gooseneck Ammo Block caddy

Kudos to Martin Tardif for his clever use of inexpensive materials. The total cost of the whole project, according to Martin, was just $8.00!

Permalink Competition, Tech Tip 2 Comments »
April 28th, 2017

Shot Costs Calculated for .223 Rem, 6BR, 6XC, .308 Win, 6.5×284

Shooting Cost by Cartridge Caliber type USAMU

Estimating Actual Cost per Round by Caliber
This article comes from the USAMU, which provide shooting and reloading tips on its Facebook Page. This week’s USAMU TECH TIP outlines a ballpark-estimate method of calculating the actual cost per round of different calibers. Some applications, and some shooters, by virtue of their high level of competition, require the very best ballistic performance available — “Darn the cost, full speed ahead!

If you are in serious contention to win a major competition, then losing even a single point to inferior ballistic performance could cost you a national title or record. However, this “horsepower” does come at a cost! Some calibers are barrel-burners, and some offer much longer barrel life. Look at this comparison chart:

Estimated Cost Per Round by Cartridge Type

Below are some estimated total expense per round (practice and competition) based on component costs, type used, expected barrel life and a standard, chambered barrel cost of $520.00 across calibers.

5.56x45mm: $0.46/round (barrel life 6,000 rounds)*

6mmBR: $0.81/round (barrel life 2800 rounds)

6XC: $0.97/round (barrel life 2200 rounds)

.308 Win: $0.80/round (barrel life 4500 rounds)

6.5-284: $1.24/round (barrel life 1100 rounds)

*Note the high round count estimate for 5.56x45mm. This is a bit deceptive, as it assumes a period of “lesser accuracy” use. The USAMU says: “Much of the difference you see here between 5.56 and .308 is due to using the 5.56 barrel for 100-200 yard training with less-expensive, 55gr Varmint bullets after its long-range utility is spent”.

Moreover, while some applications require specialized, high-cost components, others do not. And, if the shooter is still relatively new to the sport and hasn’t refined his skill to within the top few percentile of marksmen, a more economical caliber choice can help stretch a limited budget. Translation: More skill per dollar!

In this post, the prices for all items mentioned here were taken from a major component supplier’s current advertisements, and all brass was of top quality, except in the case of 5.56mm. There, 200 top-quality, imported cases were reserved for 600-yard shooting, and the other brass used was once-fired Lake City surplus.

Cartridge cases were assumed to be loaded 10 times each. [Your mileage may vary…] Bullet prices assumed the use of less-expensive, but good-quality match bullets for the bulk of shooting as appropriate.

The cost of top-tier, highly-expensive match bullets was also calculated for a realistic percentage of the shots fired, based on ones’ application. Barrel life by caliber was taken from likely estimates based on experience and good barrel maintenance.

Brass Costs Based on 10 Loads Per Case
Often, handloaders may calculate ammunition cost per round by adding the individual costs of primers, powder charges and projectiles. Many don’t consider the cost of brass, as it is reloaded several times. Here, we’ll consider the cost of enough top-quality brass to wear out a barrel in our given caliber, at 10 loads per case, except as noted above.

Don’t Forget Amortized Barrel Costs
Few shooters factor in the full, true cost of barrel life. Depending on caliber, that can dramatically increase the cost per round. For example, consider a long-range rifle in 6.5/284 caliber. This cartridge performs amazingly well, but at a cost. Ballpark estimated barrel life [in a top-quality barrel] is 1100 rounds. Some wear out faster, some last longer, but this gives a rough idea of what to expect.

Accurate barrels are a joy to use, but they are an expendable resource!
Shooting Cost by Cartridge Caliber type USAMU

A top-quality barrel plus installation was estimated at about $520.00. At 1100 rounds, barrel life adds $0.47 per round to our total cost. Thus, what had started out as an [components-only estimate, with brass cost] of $0.76/round now totals $1.24 per shot!

Cost Considerations When Choosing a Catridge Type
Some shooters might ask themselves if they could meet their present needs with a more economical caliber. If so, that equates to more practice and matches per available dollar, and more potential skill increase on the available budget.

Each shooter knows his skill level, practice needs, and shooting discipline’s requirements. Some might shoot NRA Service Rifle or Match Rifle using a 5.56mm with a long barrel life. Others might be Match Rifle shooters faced with choosing between, say, a 6mm BR vs. 6XC. A realistic assessment of ones needs, performance-wise, may help guide the shooter toward a caliber that’s most optimized to their needs at the moment.

Admittedly, the factors affecting cost for any individuals circumstances can vary significantly. However, hopefully this will provide one useful method of evaluating one’s training and competition choices, based on their skill, goals and needs.

USAMU reloading Facebook Page army tips tech

Permalink Bullets, Brass, Ammo, Reloading, Tech Tip 7 Comments »
April 28th, 2017

NRA Offers New Carry Guard Legal Insurance Program

carryguard NRA insurance program

Do you carry a firearm for self-protection, or perhaps keep a handgun in a vehicle during trips? Then you should consider signing up for a new insurance/training program offered by the NRA. Launched this week, the NRA’s Carry Guard program offers up to $1,000,000 in insurance/legal protection. This is combined with a comprehensive training program.

The Carry Guard program offers a 24/7 hotline for members. You get immediate response to secure bail bonds, legal retainers, and counseling. Importantly you can choose your own attorney from a nationwide attorney referral network. Members get up to $1,000,000 in insurance-backed protection for legal fees and will receive emergency support services in case of a self-defense incident. Spouses of NRA Carry Guard members are automatically covered, as are family members who live with a Carry Guard member and defend themselves in the home.

carryguard NRA insurance program

Three levels of protection are offered, with affordable monthly payments. When you consider that the cost of defending a civil lawsuit could easily exceed $150,000 just in legal fees, it’s smart to have some kind of legal insurance plan.

carryguard NRA insurance program

Carry Guard Training

Carry Guard members can access a variety of video tutorials. In addition, CarryGuard offers three-day training programs that combine classroom sessions with range training. The focus is on the real-life scenarios you might face. “We apply those [gun-handling] fundamentals to real-life situations, self-defense tactics and techniques, low-light shooting, force-on-force Air Soft scenarios and more. Students are evaluated on a course of fire where only a passing score earns eligibility to move to the next level.”

carry guard NRA insurance program

If you have questions about the Carry Guard Program, consult the Carry Guard FAQ page, call 1-866-NRA-5050, or use the NRA’s Contact Form.

Permalink News, Shooting Skills No Comments »
April 28th, 2017

Event Schedule for NRA Annual Meetings & Exhibits

Trump NRA annual meetings and exhibits Atlanta Georgia

It’s Friday, which means the Exhibit Hall of the 146th NRA Annual Meetings & Exhibits opens today at 9:00 am! The big attraction will be the 800+ exhibitors in the Hall — including virtually all the big name firearms manufacturers, ammo/component makers, optics makers, and shooting accessory suppliers. Along with the exhibitors, there are seminars, workshops, special events, and celebrity meet and greets now through Sunday the 30th. Here’s a quick glimpse of what’s happening today:

Regular Daily Events

NRA Booth, Booth #1912
National Firearms Museum, Booth #457
Pyramid Air – Air Gun Range, Room B309
Wall of Guns, Second Floor Hallway

Special Events

Trump NRA annual meetings and exhibits Atlanta Georgia

NRA-ILA Leadership Forum (ticket required)
Georgia World Congress Center, Hall A
Doors open at 11:00am
Event starts at 12:30 pm.

NRA-ILA Dinner and Auction (ticket required)
Omni Atlanta Hotel at CNN Center
Event starts at 6:00 pm.

Celebrity Appearances

Julie Golob – Booth #4042 – 9:00am – 10:00am; 4:00pm – 5:00pm
Graham Allen – Booth #4748 – 10:00am – 11:30am
Leaspeed6 – Booth #1713 – 10:00am – 12:00pm
Doug Koenig – Booth #4042 – 10:00am – 11:00am; 3:00pm – 4:00pm
Jerry Miculek – Booth #4042 – 11:00am – 12:00pm; 1:00pm – 2:00pm
Lou Ferrigno – Booth# 1713 – 1:00pm – 3:00pm
Eva Shockey – Booth #4748 – 1:30pm – 2:30pm
Michael Waddel, Gregg Ritz, and Hal Shaffer – Booth #4042 – 3:00pm – 4:00pm
Adam Vinatieri – Booth #2429 – 3:00pm – 4:00pm
IraqVeteran8888 – Booth #1713 – 4:00pm – 6:00pm

Click here for a complete list of celebrity appearances.

Seminars/Workshops/Special Presentations

9:00am – 12:00pm, Room B405 – Clubs & Associations Workshop
11:00am – 12:30pm, Room B312 – B313a – Current and Emerging Threats: How It Affects You!
1:00pm – 2:15pm, Room B311 – Jennifer Broome: Choosing a Dog for Your Family
1:00pm – 5:00pm, Room B315 – Refuse To Be A Victim: Teaching Crime Prevention
2:00pm – 5:00pm, Room B312 B313a – Methods of Concealed Carry
2:00pm – 6:00pm, Room B313b – 314 – Sheepdogs: The Bulletproof Mind for the Armed Citizen
2:30pm – 3:30pm, Room B405 – NRA National High Power Rifle Championships Update
3:00pm – 4:30pm, Room B310 – Mental Dynamics of Shooting
3:00pm – 4:15pm, Room B311 – Making the Shot of a Lifetime: Positional Shooting Afield

Click here for a complete list of seminars, workshops, and special presentations.

To see the full schedule, visit www.nraam.org. For more information on events, exhibitors, and exhibit hall hours, visit www.nraam.org or download the Mobile App.

Permalink News No Comments »
April 27th, 2017

Cool Tool — New Case Prep Tool with Spinning Head

Little crow gunworks Precision Prep Tool PPT

Do your hands/wrists get tired when prepping scores of cartridge cases? There’s an alternative to the big, costly case prep centers that occupy lots of space on your reloading bench. Little Crow Gunworks has developed a $29.95 hand tool that makes chamfering by hand much easier. You’ve got to watch this Precision Prep Tool in action — click on the VIDEO below to see Gavin Gear of UltimateReloader.com demonstrate how it works.

See How Tool Head Spins With Arm Movement — Very Clever!

With this tool, a natural motion of the forearm translates into rotary motion of the tool head (watch the video!). The tool-head holds four (4) tools: inside and outside neck chamfer tools, plus large and small primer pocket reamers. A hex adapter lets you use the primer pocket reamers with a power drill to remove the crimps on military brass.

Gavin Gear was impressed with this innovative device: “I’ll admit, I didn’t know how this tool worked until I tried it out, and it’s pretty amazing how something so simple can make such a big impact on a chore like brass prep. I’ve tried a lot of brass prep tools, and this is one smooth setup. I think the Precision Prep Tool is a good option for case prep chores, especially if you want to trim on the go, or sitting in your recliner watching TV.”

» READ FULL Prep Tool REVIEW on UltimateReloader.com

Little crow gunworks Precision Prep Tool PPT

This is the first manually-operated case prep tool that puts four tools at your fingertips. Other single-head inline tools require the user to twist their wrist or rotate the tool in their hand. The PPT consists of a knurled solid aluminum handle with a bearing-mounted aluminum tool head. The tool head has four 8-32 tapped holes which accept case prep tools manufactured by most reloading companies. To use the tool, simply rotate your forearm in a clockwise motion to chamfer, deburr, or clean the primer pocket. Priced at $29.95, the tool comes in five (5) colors: Red, Blue, Green, Silver, and Black.

Permalink News No Comments »
April 27th, 2017

Flat Rate Shipping Offer at Midsouth Shooters Supply

Got a big shooting shopping list? Then here’s a great opportunity. Now through April 30th at 11:59 PM you can get $9.00 flat-rate shipping from Midsouth Shooters Supply, with a $99.00 minimum order. That can translate to significant savings on big orders, or heavy items. Compare the true shipping costs from other vendors to see what a good deal this can be (some vendors charge $15 to ship a couple boxes of ammo). Note: Regular hazmat charges apply to powder, primers, and other hazmat items.

If you’re shopping at Midsouth, here are some of the very good values you might want to check out:

Permalink Bullets, Brass, Ammo, Hot Deals, Reloading No Comments »
April 26th, 2017

Ultimate Large Rifle Primer Shoot-Out — 16 Types Tested

Target Shooter Magazine Laurie Holland Primer Comparison Test Magnetospeed
Click Photo to read full test results in Target Shooter Magazine.

Mother of All LR Primer Tests
If you shoot a .308 Win, or any cartridge that uses a Large Rifle (LR) primer, you should read an important article by Laurie Holland in Target Shooter Magazine. Holland, a talented shooter from the UK, tested no less than sixteen (16) different large primer types using a custom F-TR target rifle shot from the bench. Laurie loaded .308 Win ammo* with 16 LR primer varieties and then tested for average velocity, ES/SD, and group size. This may be the most comprehensive and thorough LR primer test ever done. Here are the primer types tested:

1. CBC Magtech 9½
2. CCI 200 LR
3. CCI BR2 Match
4. CCI 250 Magnum
5. Federal 210
6. Federal 210M Match
7. Federal 215M Magnum Match
8. Fiocchi Large Rifle
9. Kynoch Large Rifle
10. Murom KVB-7 (PMC LR)
11. Norma Superflash LR
12. PMC LR Magnum
13. Remington 9½ LR
14. Remington 9½ M Magnum
15. Sellier & Bellot LR
16. Winchester WLR

LINK: READ Large Rifle Primer Test Complete (16 Primer Types)

Target Shooter Magazine Laurie Holland Primer Comparison Test Magnetospeed
Test Rig: Osprey Rifles-built F-TR rifle with Savage PTA action, 32″ Bartlein 1:12″-twist ‘Heavy Palma’ barrel, and Dolphin Gun Company modular stock with an F-Open/Benchrest fore-end.

Some of Laurie’s results may surprise you. For example, would you guess that Sellier & Bellot primers had the lowest ES, by a significant margin? And get this, among ALL the primers tested, Rem 9½M Magnum primers produced the lowest velocity, while Rem 9½ LR (non-magnum) primers yielded the highest velocity. (The total velocity spread for all primers was 35 fps). That’s counter-intuitive and it’s odd that Rems were at opposite ends of the speed spectrum among ALL primers tested.

“The rationale for doing side-by-side tests is to see what effect primer choice has on ballistics, i.e. average velocities and MV consistency. There are a great many views on the subject, a few based on tests (including primer flame photography) but most apparently hearsay.” — Laurie Holland

Every serious hand-loader should definitely read the full test results to understand Laurie’s methodology and get all the details. This is an important test, with significant findings. But if you can’t spare the time right now, here are some highlights below:

Primer with Lowest Velocity: Remington 9½ M Magnum (2780 fps)
Primer with Highest Velocity: Remington 9½ LR (2815 fps)
Primer with Lowest ES/SD: Sellier & Bellot LR (12/3.1 fps)
Primer with Highest ES/SD: Remington 9½ M Magnum (47/14.0 fps)
Primer with Smallest Group Size: Remington 9½ LR (0.43″ average, three 5-shot groups)
Primer with Biggest Group Size: CBC Magtech 9½ (0.7″ average, three 5-shot groups)

Editor’s Comment: Laurie shot three, 5-shot groups at 100 yards with each primer type. The average group size for the top six primers varied by only 0.10″ (0.43″ to 0.53″), so one can’t conclude that one type is much better than another. Total group size variance (from best to worst) was 0.27″.

Target Shooter Magazine Laurie Holland Primer Comparison Test Magnetospeed

“The biggest surprise to me … came from an elderly (at least 10 years) lot of Czech Sellier & Bellot standard caps with an ES of 12 and SD of 3.1 fps, way below those of the nearest competitor. By contrast to the Fiocchis, they were an almost slack fit in the cases and this may have contributed to their consistent performance.” — Laurie Holland

NOTE: Values in chart are based on 15-Shot strings. The ES/SD numbers will therefore be higher than is typical with five-shot strings.

All ES/SD Values from 15-Shot Strings

Target Shooter Magazine Laurie Holland Primer Comparison Test Magnetospeed

Testing 16 primer types was a huge task — we commend Laurie for his hard work and thoroughness. This extensive test is an important contribution to the “knowledge base” of precision shooting. Laurie’s findings will doubtless influence many hand-loaders who hope to produce more consistent ammunition, or achieve better accuracy. Credit should also be given to Target Shooter Magazine for publishing the results. Well done gentlemen…


*Reloading method for Test Ammo: “Test batches consisted of 16 or 17 rounds for each primer, charges thrown by an RCBS ChargeMaster and checked on lab-quality electronic scales, adjusted if necessary to within ± 0.04gn, so any charge weight variation would be under 0.1 grain which equates here to 5 fps.”
Permalink - Articles, Bullets, Brass, Ammo, Gear Review 11 Comments »
April 26th, 2017

Impressive F-Class Performance by Young Lady Shooter

U.S. USA Under 25 U-25 F-Class F-TR Team Lynzie Graham championship Canada 2017
All 10s and Xs for record — that’s a very impressive 200-10X score card for young Lynzie Graham.

Here’s a “feel-good” story about a talented young shooter. We like to acknowledge the accomplishments of the “rising stars” in our sport. Lynzie Graham, a member of the U.S. F-Class Under-25 Team recently shot a perfect 200-10X at 600 yards, not dropping a point. That’s particularly impressive when you consider Lynzie shot her 600-yard “clean” using a factory rifle — a Savage Arms .308 Win F-TR rig.

Congratulations Lynzie Graham on your first 600-yard “clean” at the Texas State Qualifier in February 2017. Lynzie was shooting the Sierra 180gr MatchKing® #2220 with her Savage F-TR .308 Win. This August, Lynzie and other U.S. F-Class U-25 Team members will be competing at the F-Class World Championships (FCWC) hosted at the Connaught Ranges near Ottawa, Canada. Click image below for more information about the 2017 FCWC.

U.S. USA Under 25 U-25 F-Class F-TR Team Lynzie Graham championship Canada 2017

Permalink Competition, Shooting Skills 1 Comment »
April 26th, 2017

Feeling Lucky? Enter the Brownells Gun Give-Away Contests

IV 8888 Rifle give-away contest NRA Show

Are you feeling lucky? Well here’s your chance to win a gun. Brownells is giving away one gun each day from April 28th through the 30th. This three-gun give-away is being offered in connection with the 2017 NRA Annual Meetings & Exhibits in Atlanta, Georgia. Brownells will have a large booth at the NRA Show, with VIP Guests including actor Lou Ferrigno and 3-Gun ace Janna Reeves.

In addition to the gun-a-day NRA Show promotion, this week Brownells is offering a special drawing for a high-tech IV 8888 AR-Platform rifle from Iraq Veterans. The IV 8888 rifle features high-end components such as carbon-fiber handguards and an Aimpoint optic.

IV 8888 Rifle give-away contest NRA Show

Permalink News No Comments »
April 25th, 2017

A Dozen Handy Items to Pack in Your Range Kit

Range Kit Gear shellholder safety dozen essentials

The shooting season is now in full swing. When you head to the range you’ll want to be prepared. That means collecting all the gear you’ll need at the range. It’s easy to forget small, critical items, so we’ve provided a checklist of the small “extras” you should pack before you head out to the range. In addition to rifle, rests, ammo, targets, and cleaning gear, here are a dozen essentials you should include in your range bag.

Shell-Holder — If you don’t have calipers, you can use a shell-holder to check for excessive case expansion from hot loads. If a fired case doesn’t slip into the shell-holder easily, your load is definitely TOO HOT.

Extra Earplugs — Always use ear protection when shooting. We bring a 35mm film canister with extra sets of foam earplugs.

Hex Wrench or Screwdriver for action screws — Action screws can work loose with time. Always bring the appropriate hex wrench or screwdriver whenever you go to the range.

Small Wrench for Scope Rings — Check the tension of your scope base and ring fasteners before you go. Bring along a small Torx wrench for the ring screws (or other tool that fits your fasteners).

Normal and Under-sized Jags — It is often wise to use one-caliber undersize jags when applying solvent with cotton patches. You should have a couple sizes in your range kit.

Extra Batteries — Bring extra batteries for all your electronic gear — which can include chronograph, windmeter, digital camera, GPS etc.

Small Notebook and Pen or Pencil — Use the notebook to record chron data, log group sizes, and make notes about wind and weather conditions.

Adhesive dots — Bring a few sheets of adhesive dots (sold at office supply stores). Use small white or black dots as target pasters. Use larger red or orange dots as aiming points (target centers).

Folding Chair or Camp Stool — This comes in handy if you’re spotting for another shooter, or if you reload away from the firing line.

Water Bottle — You can’t shoot well if you’re dehydrated. Bring at least two quarts of water with you and keep a bottle at the bench.

Surveyors’ Tape and Wood Stakes — You can make inexpensive wind indicators using surveyors’ tape attached to the top of wood stakes.

Small Plastic Ruler — Use this to measure your group sizes. A transparent (see-through) ruler works best. Rulers are also useful for drawing lines on targets.

This list is not intended to be exclusive. There are many other items you may wish to include. Obviously bring safety glasses, and Sharpie-type pens are always handy to mark targets. We invite our readers to add other “essentials” to the list. The important thing is to plan ahead, packing your key items before you drive to the range.

Permalink Bullets, Brass, Ammo, Tech Tip 4 Comments »
April 25th, 2017

Get Event Tickets for NRA Annual Meetings & Exhibits in Atlanta

NRA Annual Meetings convention exhibits Atlanta Georgia

The big NRA Convention in Atlanta is just two days away. The 146th National Rifle Association (NRA) Annual Meetings and Exhibits will be held at the Georgia World Congress Center in Atlanta, Georgia from April 27-30, 2017. 80,000+ people are expected to attend this 4-day event which will feature dozens of seminars, workshops, and special events. There are still tickets available for many of the most important events at the 2017 NRA Annual Meetings. See links below:

GET EVENT TICKETS

Thursday April 27th

National NRA Foundation Banquet
Sponsored by Henry Repeating Arms, Century Arms and Kimber
Georgia World Congress Center Building B – 5 p.m.
Tickets start at $100 – Click here to purchase.

Friday, April 28th

20th Annual Firearms Law Seminar
Georgia World Congress Center – 8 a.m.
Tickets start at $50 – Click here to purchase.

NRA-ILA Leadership Forum
Sponsored by TownHall Media and Bearing Arms
Georgia World Congress Center Hall A3 – 12:30 p.m.
Tickets start at $10 – Click here to purchase.

When President Trump speaks at the NRA-ILA Leadership Forum on April 28th, it will be the first time a sitting president visits the NRA Annual Meetings & Exhibits since Ronald Reagan.
President Donald Trump NRA-ILA Leadership

Sunday, April 30th

2017 National Prayer Breakfast
Brought to you by Fathers in the Field and sponsored by Trijicon and Universal Coin & Bullion.
Omni Atlanta Hotel at CNN Center Grand Ballroom – 7 a.m.
Tickets start at $40 – Click here to purchase.

4th Annual NRA Women’s New Energy Breakfast
Georgia World Congress Center Room B405 – 9:30 a.m.
Tickets start at $15 – Click here to purchase

NAVIGATE THE CONVENTION HALL

In and around the Convention Hall there will be 15 acres of firearms, shooting and hunting gear, and other exhibits. There will also be an on-site airgun range. For more information about the 2017 NRA Annual Meetings and Exhibits, including deals on hotels and airfare, show hours, exhibitors, maps, and much more, visit www.NRAAM.org.

CLICK HERE for Exhibitor List and Floor Plan

NRA Convention Annual Meetings and Exhibits

Permalink News No Comments »
April 25th, 2017

Zediker Book Helps with Build-You-Own AR-15 Projects

AR15 Varmint rifle AR gunsmithing robert whitley

AR15 construction guideMany of our readers use AR-type rifles for Service Rifle matches, varmint hunting, 3-Gun competition, or defensive use. AR-platform rifles can be configured in a multitude of ways to suit the application. But if you plan to put together your own purpose-built AR rifle, how do you get started?

For AR Do-It-Yourselfers, we suggest reading Glen Zedicker’s book, the Competitive AR-15 Builders Guide. Following on Zedicker’s New AR-15 Competitive Rifle book (2008), the Builders Guide provides step-by-step instructions that will help non-professional “home builders” assemble a competitive match or varmint rifle. This book isn’t for everyone — you need some basic gun assembly experience and an aptitude for tools. But the AR-15 Builders’ Guide provides a complete list of the tools you’ll need for the job, and Zedicker outlines all the procedures to build an AR-15 from start to finish.

One of our Forum members who purchased the AR-15 Builders Guide confirms it is a great resource: “Much like any of the books Mr. Zediker puts out this one is well thought-out and is a no nonsense approach to AR building. I can not stress how helpful this book is from beginner to expert level.”

Along with assembly methods, this book covers parts selection and preparation, not just hammers and pins. Creedmoor Sports explains: “Knowing how to get what you want, and be happy with the result, is truly the focus of this book. Doing it yourself gives you a huge advantage. The build will honestly have been done right, and you’ll know it! Little problems will have been fixed, function and performance enhancements will have been made, and the result is you’ll have a custom-grade rifle without paying custom-builder prices.” Creedmoor Sports sells this Zediker AR-15 book and many other excellent shooting books. Visit www.creedmoorsports.com/category/Books or call 1-800-CREEDMOOR.

Permalink Gunsmithing, Tech Tip 1 Comment »
April 24th, 2017

Bargain Finder 83: AccurateShooter’s Deals of the Week

Accurateshooter Bargain Finder Deals of Week

At the request of our readers, we provide select “Deals of the Week”. Every Monday morning we offer our Best Bargain selections. Here are some of the best deals on firearms, hardware, reloading components, and shooting accessories. Be aware that sale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.

1. Kentucky Gun Co. — Ruger Prec. Rifle 6.5 Creedmoor, $1168.01

6.5 Creedmoor Ruger Precision Rifle

Here’s a great deal if you’re looking for a GEN2 6.5 Creedmoor Ruger Precision Rifle for PRS events or other bolt-action tactical applications. The 6.5 Creedmoor is the hot ticket for this rifle, and RPRs with this chambering have been in short supply. You’ll find many sellers charging $1400.00+ for this rifle, if they have it at all.

This week you can get a GEN2 Ruger Precision Rifle in 6.5 Creedmoor for just $1168.01 from Kentucky Gun Company, with FREE Shipping to boot. The “Cash Price” price is even cheaper, $1133.99. And GunPrime.com also has the 6.5CM RPR for $1199.00 this week. Curious about the differences between the GEN2 Ruger Precision Rifle and the original Model? CLICK HERE for a complete spec comparison and a video (scroll down landing page).

2. Midsouth — Norma Tac-22 .22 LR Ammo, $3.99/box

Norma Tac22 Tac-22 .22 LR rimfire 22LR ammunition ammo

This Norma .22 LR ammo shoots WAY better than you’d expect given the low price — just $3.99 per 50ct box at Midsouth. These test targets come from Champion Shooters Supply. That vendor reports: “We have found this to run very well in Ruger rifles, handguns, and target pistols. These are 5-shot groups at 50 yards with an Anschutz 1913 rifle. This is an incredible value.” We suggest you grab some of this Tac-22 while you can at these rock-bottom prices.

Norma Tac22 Tac-22 .22 LR rimfire 22LR ammunition ammo

3. Natchez — Surplus SKB 5041 Transport Cases, $129.99

SKB Rifle Case Military Surplus 50

Natchez has obtained a supply of British MOD Surplus SKB 5041 rifle cases. These were ordered as mine detector cases, but were never issued. Natchez has removed the foam cut for the detectors and replaced it with new 2-piece convoluted foam. Interior dimension of the case is 50″x14.5″x5″ so this will hold long-barrel match rifles comfortably. These are extremely high-quality cases, very tough and rugged, waterproof with gaskets. These cases feature four SKB patented trigger latches, four reinforced padlock locations, and inline wheels. Though in excellent condition, some case may have minor exterior scuffs. You won’t find a better case at anywhere near the price. These normally retail for $299.99.

4. Sportsmans Outdoor — S&W M&P9 Shield, $239.99 after Rebate

Smith Wesson S&W M&P Shield 9mm 9x19

Here’s an awesome deal on a popular Smith & Wesson 9mm carry pistol. The M&P9 Shield (with thumb safety) is priced at just $314.99 at Sportsmans Outdoor Superstore. But it gets better — Smith & Wesson is offering a $75.00 Rebate. That lowers your net cost to just $239.99. That’s half what you might pay for a similar 9mm Glock. Good reason to buy American, and S&W’s warranty is rock solid. NOTE: This same M&P9 pistol without thumb safety is offered by Brownells for $359.99, or $284.99 after mail-in rebate.

5. Midsouth — 20-60x60mm Vortex Spotting Scope, $399.99

Vortex Spotting Scope Midsouth bargain

This is a very good spotting scope for the price. Yes it gives up some low-light performance to a spotter with an 80mm objective, but otherwise it is a good performer, and we can’t think of much that will touch this Vortex Diamondback spotting scope for anywhere near the $399.99 sale price. Choose from angled or straight version for the same $399.99 price, which includes the 20-60X zoom eyepiece.

6. Amazon — Frankford Arsenal Master Tumbler Kit, $67.99

Master tumbler reloading kit Frankford Arsenal

This Master Tumbler Kit contains everything you need to tumble rifle or pistol brass. Now on sale for $67.99 with free shipping, this Kit contains: Vibratory Tumbler, Rotary Media Separator, Plastic Bucket, 3 lbs. Cleaning Media, and 4 oz. Brass Polish.

7. Powder Valley — Reloder 16 Powder, 1-pound and 8-pound

Powder Valley H4350 RL16 Reloder 16 powder PRS 6.5 Creedmoor

Powder Valley now has Alliant Reloder 16 (RL16) in stock in both 1-lb ($23.95) and 8-lb ($178.95) containers. If you’re not familiar with this relatively new propellant, we can tell you that RL16 may be the best replacement yet for hard-to-find Hodgdon H4350. Burn rate is very similar to H4350, and RL16 is extremely temp-stable. Most importantly, our Forum members are reporting outstanding accuracy with Reloder 16. It is well suited for mid-sized cartridges such as 6XC, 6mm Creedmoor, 6.5 Creedmoor, 6.5×47 Lapua, and .260 Remington. If you like H4350, we recommend you try a pound of Alliant’s impressive Reloder 16.

8. Monmouth Reloading — 500 Lake City 5.56 Cases, $35.00

Monmouth deals of week ar15 5.56 brass .223 Rem once-fired Lake City LC

500 pieces of Lake City brass for just thirty-five bucks? Yep, that’s a great deal for anyone who needs .223/5.56 brass for varmint safaris and tactical comps. Monmouth Reloading is selling genuine, once-fired Lake City 5.56x45mm brass sourced direct from the U.S. Military. NOTE: CLICK HERE and then select 500-ct pack — the 1000-ct is out of stock. Monmouth reports: “Our current stock of Lake City 5.56 looks to be all newer year Lake City head stamp but may contain a small percentage of other NATO headstamps. Lake City is a popular, reliable brass, normally capable of many reloads.” Monmouth includes 1% overage to account for any damaged brass. NOTE: Brass has crimped primers, so the pockets will need to be reamed or swaged prior to reloading.

9. Amazon — Howard Leight Electronic Muffs, $31.11

AccurateShooter Deals of the Week Muffs hearing protection Howard Leight earmuffs sale bargain

Every shooter should own a pair of Electronic muffs, even if you prefer shooting with earplugs and/or standard muffs. Electronic muffs are great when you are doing spotting duties or are working near the firing line. They allow you to hear ordinary conversations while still providing vital hearing protection. Right now Amazon.com has the Howard Leight Impact Sport Electronic Muffs on sale for just $31.11, with free Prime Shipping. This is good deal — these NRR 22 muffs are currently Amazon’s #1 seller in the category.

Permalink Bullets, Brass, Ammo, Hot Deals, Optics No Comments »
April 24th, 2017

Scope Dope — Make Your Own Laminated Ballistics Card

laminated ballistics Card print-out

Tactical competitor Zak Smith stores his elevation and wind drift data on a handy laminated data card. To make one, first generate a come-up table, using one of the free online ballistics programs such as JBM Ballistics. You can also put the info in an Excel spreadsheet or MS Word table and print it out.

Above is a sample of a data card. For each distance, the card includes drop in inches, drop in MOA, drop in Mils. It also shows drift for a 10-mph cross wind, expressed in inches, MOA, and mils. Zak explained that “to save space… I printed data every 50 yards. For an actual data-card, I recommend printing data every 20 or 25 yards.” But Zak also advised that you’ll want to customize the card format to keep things simple: “The sample card has multiple sets of data to be more universal. But if you make your own data card, you can reduce the chance of a mistake by keeping it simple.”

Once you have the card you can fold it in half and then have it laminated at a local office store or Kinko’s. Keep this in your pocket, tape it to your stock, or tie the laminated card to your rifle. If you regularly shoot at both low and high elevations, you may want to create multiple cards (since your ballistics change with altitude). To learn more about ballistic tables and data cards, check out the excellent “Practical Long-Range Rifle Shooting–Part 1″ article on Zak’s website.

ballistics data scope coverScope-Cover Mounted Ballistics Table
Another option is to place your ballistics card on the back of the front flip-up scope cover. This set-up is used by Forum member Greg C. (aka “Rem40X”). With your ‘come-up’ table on the flip-up cover you can check your windage and elevation drops easily without having to move out of shooting position.

Greg tells us: “Placing my trajectory table on the front scope cover has worked well for me for a couple of years and thought I’d share. It’s in plain view and not under my armpit. And the table is far enough away that my aging eyes can read it easily. To apply, just use clear tape on the front objective cover.”

Links for JBM Ballistics Program

JBM Calculations Entry Page: www.jbmballistics.com/ballistics/calculators/calculators.shtml.

JBM Advanced Trajectory Calculator: www.jbmballistics.com/cgi-bin/jbmtraj-5.1.cgi.

JBM Simple Trajectory Calculator: www.jbmballistics.com/cgi-bin/jbmtraj_simp-5.1.cgi.

JBM Trajectory Cards (Come-up Table): http://www.jbmballistics.com/cgi-bin/jbmcard-5.1.cgi.

Permalink News 2 Comments »
April 24th, 2017

Remington Arms Featured on Shooting USA TV This Week

Remington Arms Eliphalet Shooting USA Television TV

Remington Arms Company celebrated its 200th year in business in 2016. The Remington enterprise was founded in 1816 by Eliphalet Remington in Ilion, New York, as E. Remington and Sons. Remington is America’s oldest gun maker and is still the largest U.S. producer of shotguns and rifles.

CLICK HERE for 200 facts about the 200-year-old company.

This week, Shooting USA TV spotlights Remington, exploring the company’s 200 years of continuous production. The show covers the rich history of Remington Arms Company, and focuses on many of the company’s most noted firearms.

The Shooting USA Hour Airs Tuesdays and Wednesdays on the Outdoor Channel:

Eastern Time:
Tuesday 3:00 PM
Wednesday 9:30 PM, 1:00 AM

Central Time:
Tuesday 2:00 PM
Wednesday 8:30 PM, Midnight

Mountain Time:
Tuesday 1:00 PM
Wednesday 7:30 PM, 11:00 PM

Pacific Time:
Tuesday 12:00 PM (noon)
Wednesday 6:30 PM, 10:00 PM

eliphalet remington armsThe Founding of a Great Enterprise
Eliphalet Remington II grew up in the countryside of Herkimer County, New York, learning the blacksmith trade. Eliphalet told his father he wanted a gun, so his father told him to build one himself. And, so he did in 1816 with the help of a hired gunsmith to bore and rifle his barrel. Eliphalet then took the finished flintlock to a local shooting match.

“And apparently it was a very successful barrel. His gun shot well,” says Remington Historian Richard Shepler. “So, neighbors, friends said, ‘ could you make me a barrel?’ Over time there was more and more demand.”

By 1828, Eliphalet moved into a factory in Illion, New York. In 1845, he jumped at the opportunity to buy the first of many government contracts. When the Civil War broke out, Remington stayed busy producing firearms. While later in the 1890s during peacetime, Remington manufactured cash registers, sewing machines, knives and even the first successful typewriter. The storied history continues, from the Remington Double Derringer to the Remington Model 700, unquestionably the most successful American sporting rifle.

Remington Arms Company Eliphalet Rem 700

Permalink - Videos, Gunsmithing No Comments »