July 2nd, 2017

6.5 Creedmoor Load Data from Nosler

Nosler 6.5 Creedmoor load data PRS Reloder 16 RL 17 H4350 Varget IMR 4895

As part of its online Load Data Center, Nosler offers very complete load data for the popular 6.5 Creedmoor cartridge. This medium-sized cartridge has become one of the most popular chamberings for tactical and PRS shooters. The 6.5 Creedmoor combines excellent accuracy, good mag-feeding, good barrel life, moderate recoil, and reasonable component cost. That’s why this cartridge has caught on quickly. GET ALL 6.5 Creedmoor Load Data.

6.5 Creedmoor Velocity Test Rifleshooter.com barrel cut test Nosler Load Data
How does barrel length affect 6.5 Creedmoor Muzzle Velocity?
CLICK HERE for RifleShooter.com barrel cut-down velocity test.

According to the Sierra Load Manual: “Developed in 2007 by Dennis DeMille and Dave Emary, the 6.5 Creedmoor is a shortened and improved 30 TC cartridge case that was inspired by the .308 Winchester design. This short action design was created to maximize case capacity and a wide range of loading lengths, while still fitting in standard short action magazines. With the correct twist barrel, the versatile 6.5 Creedmoor can take advantage of the wide range of bullet weights available in 6.5 mm (i.e. .264 caliber). Reloaders should keep in mind that the 6.5 Creedmoor works best with medium to medium-slow powders such as H4350, Varget, Win 760, and RE-17.”

Click Image to Load PDF File for Listed Bullet Weights

Nosler 6.5 Creedmoor load data PRS Reloder 16 RL 17 H4350 Varget IMR 4895 Nosler 6.5 Creedmoor load data PRS Reloder 16 RL 17 H4350 Varget IMR 4895
Nosler 6.5 Creedmoor load data PRS Reloder 16 RL 17 H4350 Varget IMR 4895

In addition to the data sheets shown above, Nosler offers 6.5 Creedmoor data for a 100 grain Ballistic Tip and Partition bullets.

Nosler 6.5 Creedmoor load data PRS Reloder 16 RL 17 H4350 Varget IMR 4895
Permalink Bullets, Brass, Ammo, Reloading, Tactical No Comments »
July 2nd, 2017

USA Shooting National Championships at Fort Benning

USA Shooting National Championship Fort Benning Georgia USAMU paralympics
USA Shooting file photo 2016

The USA Shooting National Championships are underway at Fort Benning, Georgia. This is an elite event for Air Rifle, Smallbore Rifle, and Pistol. Thus far titles have been claimed in Men’s Three-Position Rifle, Women’s Air Rifle, Centerfire Pistol, Standard Pistol and Junior Men’s Sport Pistol. 2016 Olympian Lucas Kozeniesky won the overall Men’s Three-Position Rifle title, an Olympic event. He and eventual silver medalist George Norton shot the same Qualification scores yesterday and today (1166, 1174). Kozeniesky placed two positions higher in the Final to claim the overall gold medal.* Two-time Olympian Michael McPhail won the bronze medal.

USA Shooting National Championship Fort Benning Georgia USAMU paralympics

In Women’s Air Rifle, Ole Miss Rebel Alison Weisz shared the lead after Day One with an impressive 419.8. Though her Qualification score of 416.6 wasn’t the highest among the competitors, her win in the Final secured her first National Championship title and nomination to the National Team – .1 point ahead of Sagen Maddalena who claimed silver. Emily Stith won bronze AND the women’s Junior title.

USA Shooting National Championship Fort Benning Georgia USAMU paralympics

Six-time Olympian Emil Milev won the Men’s Standard Pistol competition in dominating fashion – winning the title by an astronomical 61 points. Kevin Bennett won silver and William Dutton won bronze.

Paralympic Sport Match
A World Shooting Para Sport-sanctioned match was held in conjunction with this year’s National Championship with nine countries participating. Some of these competitors shot from wheelchairs, while others shot from a bench with support for the rifles. Three American athletes earned medals and nominations to the National Paralympic Team with their performances today.

USA Shooting National Championship Fort Benning Georgia USAMU paralympics
File photo 2016


*Here’s how the scoring worked. Athletes completed two days of Qualification matches, with competitors in the Olympic events (Women’s Air Rifle and Men’s Three-Position Rifle) also competing in a Finals match today. Points from the two Qualification matches, plus points earned based on rank in the Finals were combined to determine athletes’ final placements at these National Championships.

Permalink Competition, News No Comments »
July 2nd, 2017

Exhibition Grade F-Open Rifle from Master Class Stocks

Alex Sitman Master Class StocksAlex Sitman of Master Class Stocks in Pennsylvania is widely considered one of the finest rifle-stock craftsmen in the country, if not the world. Alex’s workmanship and dedication to excellence is top-of-the-line. Alex normally custom-fits each stock to his customer precisely. Many hours are dedicated to stock prep and inletting, and his bedding jobs are flawless. Each stock is exactingly hand-crafted with great attention to detail, and then the stock is “dressed” in the customer’s choice of finishes.

Doing all that takes time — a lot of time. That’s why Master Class Stocks has a long waiting list, and it can take months before a big job is completed. But when Alex is involved, you can count on the final product being a work of stock-making art. Here’s an example. Alex recently stocked an F-Class rifle using eye-popping, exhibition-grade Bastogne walnut. The wood was sourced from Cecil Fredi of GunstockBlanks.com. Alex says: “Cecil’s wood is some of the best I’ve ever used. This blank cost over $1000.00, but it was truly spectacular.” Since the blank was less than 3″ wide, Alex (with assistance from 8-time NRA High Power Champion Carl Bernosky) laminated on the 3″-wide forearm “wings” using spare wood left after the blank was cut. See how Alex and Carl carefully matched the grain of the wood on the forearm. And note how perfectly the adjustable cheek-piece is fitted. If you want a stock like this on your next rifle, contact Alex Sitman at Master Class Stocks, (814) 742-7868.

The Bastogne Beauty — More Construction Details
Eric Kennard tells us: “This rifle was built for Mike Dana in Florida. Kelbly’s did the metal work. [The action is a Stolle Panda F-Class.] Barrel by Brux. Chambering? 6mmBR of course! Mike added a March 10 x 60 scope. Let me tell you this is beyond a work of art! The fit is absolutely perfect! There is not one flaw in the wood-work. The pillar bedding is also perfect! Did you notice the ebony inserts? Or Alex’s custom trigger guard? Alex out did-himself this time. Most of us would not dare to shoot [this gun]!”

Permalink Gear Review, Gunsmithing 2 Comments »