July 9th, 2017

Triple Threat — Laurie Holland Reviews Three Reloading Presses

RCBS Rockchucker Rock Chucker Forster Co-Ax Coax Summit single-stage Press Hornady Laurie Holland Target Shooter

“The press is the heart of the handloading operation, also traditionally the most expensive single tool employed…” — Laurie Holland

British competitive shooter Laurie Holland has reviewed three popular, single-stage reloading presses for Target Shooter Magazine (targetshooter.co.uk). Laurie bolted up a Forster Co-Ax, RCBS Rock Chucker Supreme, and RCBS Summit to his reloading bench and put the three presses through their paces. These three machines are very different in design and operation. The venerable Rock Chucker is a classic heavy, cast-iron “O”- type press that offers lots of leverage for tough jobs. The smaller RCBS Summit press is an innovative “upside-down” design with a large center column and open front. It offers a small footprint and easy case access from the front. The Co-Ax is unique in many respects — dies slide in and out of the upper section which allows them to “float”. The cartridge case is held in the lower section by spring-loaded jaws rather than a conventional shell-holder.

READ Laurie Holland Reloading Press 3-Way Comparison Review

If you are considering purchasing any one of these three presses, you should read Laurie’s article start to finish. He reviews the pros and cons of each press, after processing three different brands of brass on each machine. He discusses ergonomics, easy of use, press leverage, smoothness, priming function, and (most importantly), the ability to produce straight ammo with low run-out. The review includes interesting data on case-neck run-out (TIR) for RWS, Federal, and Norma 7x57mm brass.

RCBS Rockchucker Rock Chucker Forster Co-Ax Coax Summit single-stage Press Hornady Laurie Holland Target ShooterReview Quick Highlights:

RCBS Rock Chucker Supreme
“My expectations of the antediluvian RCBS Rock Chucker Supreme’s performance weren’t over high to be honest as I mounted it in the place of the Summit. As soon as I sized the first of the stretched RWS cases though, I saw why this press has been such a long-running favorite. The workload was considerably reduced compared to the other two presses and doing 40-odd cases took no time at all with little sweat — it just eats hard-to-size brass.”

RCBS Summit Press
“Despite its massive build and long-stroke operating handle, [the Summit] took more sweat than I’d expected, even if it was somewhat less work than with the Co-Ax. Although the Summit is apparently massive, I noticed that the die platform would tilt fractionally under the heaviest strains[.] It is nevertheless a very pleasant press in use and bullet seating was a doddle — the few examples tried proving very concentric on checking them afterwards. The optional short handle would be valuable for this task.”

Forster Co-Ax
“[On the Co-Ax], the operating handle is above the machine, located centrally here [with] twin steel links at the top end of the press dropping down to the moving parts. The Co-Ax incorporates a number of novel features, principally its automatic and multi-case compatible shell-holder assembly with spring-loaded sliding jaws, very neat spent primer arrangements that allow hardly any gritty residues to escape and foul the moving parts and, the snap-in/out die fitment that allows rapid changes and also sees the die ‘float’ in relation to the case giving very concentric results. I own this press and it meets my handloading needs very well.”

Permalink Gear Review, Reloading No Comments »
July 9th, 2017

The 22BR as General-Purpose Varmint Cartridge

Richard Franklin (who operated Richard’s Custom Rifles prior to his retirement), has built scores of varmint rifles, in many different calibers. One of Richard’s all-time favorite varmint rifles is a 14-twist, 22BR built on his model 11 stock in laminated Black Walnut and fiddleback maple. Richard says the rifle is versatile and deadly accurate out to 400 yards. Richard uses a Leupold 8.5-25x50mm LRT with varmint reticle.

“This is my light walking varminter. It’s built on a blueprinted SS Remington 700 short action and chambered as a no-turn 22 BR for Lapua brass. The bolt handle is a Dave Kiff replacement and I’ve fitted a Jewel BR trigger with bottom safety. Barrel is a Lilja, 1:14″ # 6 contour with a muzzle diameter of .750″. I shoot the 40gr V-Max in the rifle at 4000 FPS. Its tough on hogs if you don’t try them too far. 400 yards is about the max with it. Accuracy is outstanding and with Roy, Mike, my grandson and myself shooting this rifle I don’t believe it has missed more than 3 hogs out of over 100 shot at this summer. This rifle is carried in a ceiling rack in the truck where its handy and is used by the first person that grabs it when a hog is sighted if we are moving between setups. The Varmint reticle on the Leupold is nice for quick hold-overs as you change distances.”

Detail of Model 11 Stock (Different Rifle in Birdseye Maple)

22BR Rivals 22-250 Performance
With bullets in the 40gr to 60gr weight range, the 22BR gives up very little in velocity to a 22-250, despite burning quite a bit less powder (30-32 grains for the 22BR vs. 35-38 grains for the 22-250). With a match-quality chamber, the 22BR will probably have an edge in accuracy over a 22-250, and you should experience longer barrel life. Here are some recommended 22BR loads for 40-60gr bullets:

For more info on the 22BR for varminting, read our 22BR Cartridge Guide

Permalink Hunting/Varminting 2 Comments »