May 31st, 2018

6.5×47 Tactical Tack-Driver — The Non-Creedmoor ‘Six-Five’

6.5x47 Lapua Tactical Rifle Ryan Pierce Brux Barrel H4350 Berger Hybrid

A couple seasons back we published our comprehensive 6.5×47 Lapua Cartridge Guide, researched by the 6.5 Guys. In case you’ve been wondering what kind of accuracy is possible for a tactical-type rifle chambered for this mid-sized cartridge, check out this tack-driver built by gunsmith Ryan Pierce. That’s a mighty impressive 0.206″ five-shot group fired with Berger 140gr Hybrids using a Brux cut-rifled barrel. The powder was Hodgdon H4350, a very good choice for this cartridge.

6.5x47 Lapua Tactical Rifle Ryan Pierce Brux Barrel H4350 Berger Hybrid

Ryan reports: “Here is a 6.5×47 I built for a customer. It features a trued Rem 700 action, Brux 1:8″ Rem varmint-contour barrel, Mcmillan thumbhole stock, Surgeon bottom metal, and 3-port muzzle brake. The customer’s preferred load is the same that has worked in the last couple dozen 6.5x47s I’ve built: 41.1-41.3 grains of H4350 with 140 hybrids .050″ off the lands. This should run about 2810-2815 fps from a 26″ barrel. The 3.128″ refers to length of a loaded round from the base to ogive including the Hornady ogive comparator tool.”

6.5x47 Lapua Tactical Rifle Ryan Pierce Brux Barrel H4350 Berger Hybrid

Yep, It Measures Up…
Lest anyone dispute Ryan’s measurement of this group (the internet is full of nay-sayers), 0.206″ is EXACTLY what we got when we measured this group using OnTarget software. See for yourself:

6.5x47 Lapua Tactical Rifle Ryan Pierce

Similar Posts:

Tags: , , , , , ,