July 31st, 2018

Reloder 23 and Reloder 26 — Good for Magnum Cartridges

Alliant Bofors Nitrochemie Reloader Reloading RL Reloder powder 22 23 25 26

Do you shoot a magnum cartridge? Here are two modern-formulation powders you may want to try: Reloder 23 and 26. We have been particularly impressed with Reloder 23. It has worked well in competition for target cartridges such as the 7mm RSAUM. Reloder 23 is like a slower version of Reloder 16 — a very temp-stable powder which has proven a worthy rival to H4350.

Ever heard of Alliant Reloder 23? Or Reloder 26? These two relatively new European-produced Reloder propellants were introduced in 2014. Most folks haven’t tried these Reloder powders because it took quite a while for the first shipments of RL 23 and RL 26 to arrive in the USA. But now these two new propellants are available in the USA, with substantial inventories in stock at some larger vendors. For example, Powder Valley has both RL 23 and RL 26 in stock now at $23.50 per pound. Many other vendors have ample RL 23, but RL 26 is a bit harder to find.

From our Forum members who shoot large magnum cartridge types with heavy bullets, we have heard good things about both RL 23 and RL 26. Reports from the field indicate that both these powders are delivering impressive velocities with low velocity ES/SD.

What are the characteristics of RL 23 and RL 26? That question was answered by Paul Furrier who works for ATK, the parent company of Alliant Powders. Posting in our Shooters’ Forum, Paul writes:

“Let me provide some factual info about these products. Some of the stuff that gets propagated is not correct. Reloder 23 is produced by our Swedish partner Bofors, and Reloder 26 is produced in Switzerland by our extremely capable partner Nitrochemie. I have seen it stated that they are both made by Bofors, so that is incorrect.

I have also noticed people are equating Reloder 23 to Reloder 22, and Reloder 26 to Reloder 25. Both of those statements are definitely incorrect. We do state that the performance of Reloder 23 is similar to Reloder 22, and it is, in general burn speed terms, but they are most certainly not the same. We have worked quite a lot of recipes for Reloder 23, and they are not the same as Reloder 22. Reloder 26 is definitely slower burning than Reloder 25, so there shouldn’t be any confusion there either.”

Alliant Bofors Nitrochemie Reloader Reloading RL Reloder powder 22 23 25 26

Furrier says that RL 23 is NOT sensitive to temperature shifts: “Reloder 23 was developed to bring a truly temp-stable powder to the Reloder 22 burn-speed range using Bofors new process technology. This is the second product developed for us with this TZ® process, the first being AR-Comp™. We see terrific efficiencies, SDs, accuracy and flat temp response from these powders. Please try them, I think you will be impressed.”

Speed and More Speed with RL 26
Think of Reloder 26 as a high-velocity powder for big cartridges. Furrier explains: “Reloder 26 is produced with Nitrochemie’s latest generation EI® process technology. This is the same impregnation coating process used to produce Reloder 17, Reloder 33, and Reloder 50 for us, and it is fantastic. The “so what” on Reloder 26 is great ballistic efficiency, high bulk density so you can get more of the slow powder into the case to harness the energy, and decent, predictable extreme temp response. Reloder 26 is not as flat at temps as the TZ or Australian materials, but it is very manageable, usually in the 0.5 fps/°F range (depending on the application). Just as important, the pressure increases at hot are very manageable. We are using quite a bit of this powder in our Federal factory ammo due to the fantastic ballistics and accuracy.

Both of these new Reloder powders contain decoppering agent to help reduce coppering up your barrels, but this is nothing new for us. Bofors began adding decoppering agent to our Reloder rifle powders in the 2002 timeframe, and all our Swiss Reloders except 17 contain their proprietary additive. (We may include it in 17 at some point also, but right now we like it just the way it is.) Sorry we didn’t have a snappy name figured for the decoppering agents, we just did it.

Both of these new Reloder powders are also produced to the current highest level of ‘green’ technology. Actually, all of our Alliant rifle, pistol and shotshell reloading powders meet the current (tough) European requirements for elimination of nasty ingredients. They do not contain any dinitrotoluene or dibutylphthalate, which are a couple of the nasties that are commonly used in smokeless powders.
Thank you for your interest in our new powders.” — Paul Furrier, ATK

Reloder 23

Like AR-Comp™, new Reloder 23 from Alliant Powder performs consistently across temperature extremes. Its sophisticated TZ® technology manipulates the response of the material and resists the natural tendency to generate more pressure at higher temperatures and less pressure at lower temperatures. Reloder 23 is perfect for long-range target shooters seeking performance similar to Reloder 22 with world-class temperature stability.

Features & Benefits:
 TZ technology provides exceptionally consistent velocities across temp extremes
 Contains proprietary de-coppering additive
 Ideal for long-range target shooting
 Excellent lot-to-lot consistency
 Formulation contains no DNT or DPB
Made in Sweden for Alliant Powder

Reloder 26

Reloder 26 offer high velocities in large magnum cases. Achieve awesome ballistics with new Reloder 26 from Alliant Powder. The propellant’s burn speed falls between that of Reloder 22 and Reloder 33, and it incorporates EI® technology to produce extremely high velocities in magnum cartridges. Reloder 26 has a high bulk density that allows larger powder charges, and it provides a consistent, controlled response to temperature changes.

Features & Benefits:
 EI technology produces extremely high velocities in magnum cartridges
 Contains proprietary de-coppering additive
 Controlled temperature stability
 Excellent lot-to-lot consistency
 Formulation contains no DNT or DBP
Made in Switzerland for Alliant Powder

Similar Posts:

Tags: , , , , , ,