September 10th, 2018

AMP MATE Automated Case Shuttle for AMP Annealing System

Annealing made perfect AMP annealer case shuttle carriage autofeed cartridge brass

Our New Zealand friends who created the advanced, computer-controlled AMP Annealing system have a remarkable upgrade available. The new AMP MATE is a clever, automated case-handling device that loads and retrieves your brass cartridges during the AMP induction annealing process. The AMP MATE installs right on top of a basic AMP Annealer, and takes all the manual labor out of the process. Once you set up the AMP MATE for your specific cartridge type, and adjust the AMP’s “brain” for your brass, then the AMP MATE takes over. Simply load your brass into the hopper, hit the start button and your brass comes out perfectly annealed. See how this works in this video:

The system essentially works automatically — feeding and retrieving cartridge brass. During initial set-up, you many need adjust the carriage system geometry and cycling rate. These functions are covered in the AMP MATE video. If you have other questions regarding how to set up and use the AMP MATE, email the manufacturer: info [at] ampannealing.com .

Annealing made perfect AMP annealer case shuttle carriage autofeed cartridge brass

Annealing Made Perfect (AMP) Basics
If you’re not familiar with the AMP (Annealing Made Perfect) induction annealing system, here’s a video that explains how the system works. Basically, a micro-processor controls an electrical coil. As electricity flows into the coil, the process of induction transfers heat to the cartridge brass. With exact control over the flow of electricity, this anneals the brass precisely each time. Specific profiles can be created for your brand of cartridge brass — with the exact duration and amount of heat for ideal results.

Annealing made perfect AMP annealer case shuttle carriage autofeed cartridge brass

Similar Posts:

Tags: , , ,