October 29th, 2018

Scottish Shooter Sets UK 1000-Yard Records with Factory Savage

David Sharp UK Scotland Ingleston 1000-Yard 1000 yards record group factory sporter class vince bottomley
“The blue plastic barrels that we have to shoot through are the idea of the local police — to ensure that we keep our rifles pointing at the targets!” — David Sharp

Here’s a great story from the other side of the pond — the United Kingdom. Shooting a .308 Win factory Savage rifle, a novice benchrest shooter set two new 1000-Yard UK Factory Sporter Class records with a group barely over three inches plus a 6.756″ four-group Aggregate. The Savage had been upgraded with an inexpensive aftermarket stock and Timney trigger, but was otherwise “as manufactured” — with factory barrel.

David Sharp UK Scotland Ingleston 1000-Yard 1000 yards record group factory sporter class vince bottomley
At Ingleston, competitors shoot for group size only — so there are no scoring-rings on the targets.

On October 14, 2018 David Sharp had a memorable performance at the Ingleston Range in Scotland. David Agg’d 6.756 inches for all four 5-shot groups, a new UK 1000-Yard record for the Factory Sporter Class. His smallest group measured 3.090 inches, which is also a new UK Factory Sporter record. Great Shooting David — congrats!

Sharp Sets Two New UK Factory Sporter Class 1000-Yard Records

Report by Vince Bottomley
In the UK, long-range benchrest is far more popular than short-range. The UKBRA (United Kingdom Benchrest Association) holds shoots at three venues: Diggle (100, 600 & 1000 yards), Bisley (100 yards only) and Ingleston in Dumfries, Scotland (1000 yards).

The Scottish venue is the UK’s latest 1000-yard facility. It was established just three years ago yet it is already holding well-attended monthly shoots. It is operated by the Galloway Small Arms Club and, as you may imagine, it is situated in the beautiful wild Scottish countryside.

The UKBRA operates under IBS/NBRSA rules for the Light and Heavy Gun Classes but, many of the Scottish members are also deer stalkers and came to the benches with their hunting rifles, so we also run a Factory Sporter Class. Factory Sporter rifles must be the original manufacturer’s barreled-action but a more benchrest-compatible stock may be used or ‘bag-rider’ attachments may be fitted to the butt and fore-end. The barreled-action must however be totally as it left the factory — no re-chambering or throating, though the crown may be re-cut. To discourage potentially dangerous trigger modifications, an after-market trigger may be fitted.

The Factory Sporter Class is very popular and Savage rifles, chambered for the 6mmBR, 6.5-284, and .308 Win are the favored factory-classers. These have produced some remarkable performances over the years, often out-performing custom rifles!

David Sharp is a True Sharp-Shooter
David Sharp is a relatively new benchrest shooter, though he has decades of firearms experience. David started his shooting days wild-fowling and rough shooting with a shotgun over 50 years ago. After retiring, he moved to Dumfriesshire and began shooting again — clay pigeon, wildfowling on the Solway, driven pheasant and deer stalking. As a stalker, David keeps his eye in by shooting targets on a local range using his .308 Mannlicher.

Eventually, the pains of old age began taking their toll and stomping up hills was becoming more difficult. Fortunately, David heard about the Ingleston 1000-yard range and joined the Galloway Small Arms Club in 2016. As a complete novice to benchrest shooting, David relied on the guidance and advice from his fellow Club members and eventually purchased a Savage Model 12 F-TR rifle in .308 Winchester to compete in the Factory Class.

Here’s the view looking downrange. What a beautiful place to shoot…
Castle Douglas Scotland UK UKBRA benchrest 1000 yard range AccurateShooter Vince Bottomley

.308 Win Factory Savage with Choate Stock and Vortex Scope
David’s rifle has some upgrades, as permitted for Factory Sporter Class. The Savage trigger was replaced with a Timney. The Savage F-TR stock was replaced with a Choate Varmint stock fitted with a Sinclair front bag-rider. The Choate’s butt was home-modified to better ride the Edgewood bag. The rifle is fitted with a Vortex Golden Eagle 15-60 scope mounted on a 20 MOA Ken Farrell rail via Vortex rings. Dave shoots off a SEB Mini front rest. As the Mini is lighter to lug around than the SEB NEO (and less expensive), the Mini is becoming popular with UK shooters.

David reports: “My rounds are nothing special — I’m using Sierra 2155 155 grain bullets over Vihtavuori N140 powder and CCI 200 primers. I use Lapua brass (large primer) full-length sized in a Redding S bushing die to give 0.002″ neck-tension.”

Although the Ingleston Range is a beautiful place to shoot, as you can imagine conditions can vary dramatically and it is not known for mild days! However, at 9:00 am on the day of David’s record shoot, it was clear and quite still with the flags barely lifting. The temperature was already 15 deg C (59 deg F). What more could any benchrest shooter ask for?

David Sharp UK Scotland Ingleston 1000-Yard 1000 yards record group factory sporter class vince bottomley

In the photo of David above, you can just see the four 1000-yard targets in the extreme top right of the picture — up near the tree-line. Note, at Ingleston, competitors shoot for group size only. Hence there are no scoring-rings on the target. However, Vince Bottomley says score shooting may begin at some UK ranges: “This year we have purchased a set of electronic targets. The IBS target face can be inputted so we will now start to shoot for score as scores are registered instantly. Previously, it just took too long to score the targets as well as measure the groups.”

Permalink Competition, Gear Review, News 5 Comments »
October 29th, 2018

Bargain Finder 162: AccurateShooter’s Deals of the Week

Accurateshooter Bargain Finder Deals of Week

At the request of our readers, we provide select “Deals of the Week”. Every Monday morning we offer our Best Bargain selections. Here are some of the best deals on firearms, hardware, reloading components, optics, and shooting accessories. Be aware that sale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.

1. CDNN — Winchester XPR Rifle $289.99 after $75 Rebate

Winchester XPR Rifle Rebate discount full hunting sale

We like the Winchester XPR as an affordable, entry-level hunting rifle. The three-lug bolt has a short throw, the mags seat easily and the rifle balances well. CDNN is offering the XPR for just $364.99. That’s a great price, but it gets even better. Winchester is offering a $75.00 factory rebate, lowering your net cost to just $289.99. This CDNN deal is available now for four popular chamberings: .243 Win, .308 Win, .270 Win, and .30-06 SPR. Winchester’s $75 Factory Rebate applies to any new Winchester XPR or Model 70 rifle purchased from August 1 through October 31, 2018. For more info, visit Winchester’s Trophy Season Rebate Page.

Winchester XPR Rifle Rebate discount full hunting sale

FREE SCOPE! To sweeten the deal even more, right now CDNN is offering a FREE Weaver 3-9x40mm scope with each XPR rifle sold — check it out!

2. Midsouth — RCBS ChargeMaster Lite, $199.99

RCBS Chargemaster Lite

Tired of weighing your charges one by one to get the accuracy you’re looking for? Midsouth has the RCBS ChargeMaster Lite electronic scale/dispenser on sale for only $199.99. This is a great chance to pick up one of the best off-the-shelf powder scale/dispensers for an excellent price. You can pay up to $260.00 elsewhere. Supplies are limited so now’s the time to buy if you’ve had the ChargeMaster Lite on your shopping list.

3. Grizzly.com — Bald Eagle Rests $165.00 – $199.95

Bald Eagle Deal front rest cast iron slingshot

Bald Eagle (by Grizzly) offers one of the best value-priced front rests on the market. We’ve seen F-Class shooters win matches with the Bald Eagle Slingshot Windage Rest, which costs less than a fifth of a premium co-axial rest. For a new shooter, this is a very cost-effective solution. One Forum member purchased this Bald Eagle BE1006 rest for his grandson, deciding it was the best rest under $300.00. Both rests shown offer a cable (with large knob) for easy windage adjustment. The Slingshot model, in cast iron or aluminum, has an elongated front leg for added stability. This also brings the Windage knob within easy reach. The aluminum version (BE1005) is considerably lighter and $35 cheaper, so it may be preferred by rimfire and varmint shooters. Note: Front sandbag sold separately.

4. Al’s — Vortex Razor HD 20-60x85mm Spotting Scope, $854.99

Vortex Razor 20-60x85mm 20x60 Spotter Sale Discount Spotting Scope

Here’s a great deal on a high-quality spotting scope from a top optics maker. AL’s Sporting Goods has last year’s model Vortex Razor 20-60x85mm spotter for only $949.99, including eyepiece. But it gets better — use Code ALS10 for another 10% off, bringing the final price down to $854.99. This is a very good spotter for the money and as Vortex will tell you, “buy a Razor now and we’ll always replace it with a Razor in the future”.

5. Cabela’s — Garmin GPSMAP 64S $199.00 on Sale

Creedmoor sports trimmer case kit platform

Cabela’s has slashed its price on the popular Garmin GPSMAP 64S unit, on sale for $199.99. This is an excellent hand-held GPS for hunters and hikers, with long battery life, good reception, and a fairly large screen. This unit features a High-Sensitivity GPS, Glonass Receiver, and Barometric Altimeter (important for your ballistics). The Garmin GPSMAP 64S is also available at Amazon.com for $220.90 with free shipping.

6. Creedmoor Sports — Wilson Trimmer Kit, $159.95

Creedmoor sports trimmer case kit platform

Here’s a slick set-up for precision case trimming. Creedmoor’s complete L.E. Wilson stainless trimmer kit features micrometer-adjustable length stop (.001″ increments), improved deluxe SS handle, and a special Creedmoor platform. The platform/mounting board can store 9 different case holders and comes with a polymer tapping block for knocking cases out of the holder. The platform also has four rubber feet. This system is also power-adaptable. The L.E. Wilson Trimmer Platform Kit is marked down to $159.95 this week. We favor this kind of system for trimming match cases.

7. Stocky’s — LR Stocks with Aluminum Bedding Block, $179.99

Stocky's Stocks Composite V-block stock

Here’s a good deal on a versatile Stocky’s Long Range Stock with aluminum V-block bedding system. For just $179.99, order this for Rem/Rem Clone long actions or short actions, with either narrow or wide (varmint/tactical) barrel channel. This would be a good choice for a varmint rifle. This is also offered with handsome hydrographic or web-pattern baked-on textured finishes for $199.99.

8. Palmetto State Armory — 500 Rds CCI .22 LR, $16.99

CCI Blazer 40gr .22 LR 22LR rimfire ammo sale

Here is a crazy-good deal. Get 500 rounds of CCI 40gr .22 LR rimfire ammo for just $16.99. That works out to just 3.4 cents per round. But act soon. This deal on CCI Blazer rimfire ammo expires Monday October 29, 2018 at 11:59 pm EST. If you buy five or more 500-count boxes (that’s at least 2500 rounds), you can also get free shipping.

9. Amazon — Jialitte Scope Bubble Level (30mm + 1″), $11.99

Scope Optic bubble level 30mm 1

This nicely designed Jialitte Scope Bubble Level is fully CNC-machined to close tolerances for a good fit. It features a 30mm milled inside diameter, plus an inner insert ring so it will also fit 1″-diameter main tubes — that dual-diameter versatility is a nice feature. We also like the way the unit is nicely radiused, and has a low profile in the middle. User reviews have been very positive. You could easily pay $35.00 or more for a 30mm scope level. Purchasers have praised this product — almost all verified buyers have rated this five stars.

RCBS and Vortex selections by Forum member F-Class John.
Permalink Bullets, Brass, Ammo, Hot Deals No Comments »
October 29th, 2018

Hybrid Bullets: How to Optimize Your Seating Depths

Berger Hybrid Bullet

SHOT Show 2017 kicks off in thre weeks in Las Vegas. While at SHOT Show next month, we plan to get the “inside scoop” on new bullet designs from Berger, Hornady, Lapua, Nosler and Sierra.

A while back, at SHOT Show 2012 we chatted with Berger Ballistician Bryan Litz about Berger’s popular line of Hybrid bullets. Berger now offers a wide range of Hybrids in multiple calibers and weights. In fact, for .30-Caliber shooters, Berger now offers many seven (7) Hybrid match bullets, with weights from 155 grains up to 230 grains. Two .338-caliber OTM Tactical Hybrids were introduced in 2012 (a 250-grainer and a 300-grainer).

Bryan tells us: “The hybrid design is Berger’s solution to the age old problem of precision vs. ease of use. This design is making life easier for handloaders as well as providing opportunities for commercial ammo loaders who need to offer a high performance round that also shoots precisely in many rifles with various chamber/throat configurations.”

For those not familiar with Hybrid bullets, the Hybrid design blends two common bullet nose shapes on the front section of the bullet (from the tip to the start of the bearing surface). Most of the curved section of the bullet has a Secant (VLD-style) ogive for low drag. This then blends in a Tangent-style ogive curve further back, where the bullet first contacts the rifling. The Tangent section makes seating depth less critical to accuracy, so the Hybrid bullet can shoot well through a range of seating depths, even though it has a very high Ballistic Coefficient (BC).

In the video we asked Bryan for recommended seating depths for 7mm and .30-Caliber Hybrid bullets. Bryan advises that, as a starting point, Hybrid bullets be seated .015″ (fifteen thousandths) off the lands in most barrels. Watch the video for more tips how to optimize your loads with Hybrid bullets.

Permalink - Videos, Bullets, Brass, Ammo No Comments »