February 13th, 2019

Universal Background Check Legislation Introduced in Congress

H.R. HR 8 bill private gun sales ban background check Congress democrat legislation anti-gun Pelosi democrat extreme anti-gun Second Amendment
Marlin 1895 Background image from Sportsmans Arms, Petaluma, CA.

Are the days of private gun sales numbered nationwide? Democrats in the U.S. House of Representative have introduced an extreme gun control measure, H.R. 8, that would regulate all private gun sales, circumventing state laws covering gun rights. American Military News reports: “A new bill restricting private gun sales is expected to move to the floor of the U.S. House of Representatives this week for a vote. The bill, H.R. 8, was introduced by [House] Democrats. H.R. 8 plans to stop Americans from conducting private gun sales as they have been since 1791. Instead, they will be required to conduct background checks on prospective buyers before they can sell their own property. The House Judiciary Panel is expected to send the bill to the floor for a vote on Feb. 13.”

READ H.R. 8 Full Text HERE »

Background Checks Would Be Required Nationwide for ALL Private Party Gun Sales
This new legislation would essentially require that ALL gun sales, even between private parties, be subject to Federal NICS background checks.* On the surface, this seems to have some appeal, but there is little convincing evidence that such legislation will produce a meaningful reduction in gun violence. Why? Criminals obtain guns illegally (though theft and the black market), and nearly all the mass shooters in recent years have used weapons that were obtained legally, AFTER the perpetrators had passed normal FBI background checks.

Despite these facts, supporters of H.R. 8, say it is time to outlaw private gun sales. Rep. Henry C. Johnson (Democrat, Georgia) claimed: “Because background checks are not required for sales by unlicensed gun dealers, guns end up in the hands of dangerous people. The failure of Congress to pass universal background check legislation has eroded our sense of safety on the streets, in our schools, and even in our places of worship.”

Conversely, gun rights supporters state that H.R. 8 will NOT have the desired effects. Rep. Doug Collins (Republican, Georgia) stated: “I appreciate the efforts of those who want H.R. 8 and many who have signed on, but similar gun control measures would not have prevented Columbine, San Bernardino, Charleston, or other tragedies. You go to the Bureau of Prisons, when they put out their statistics, most criminals — as you well know — do not get their guns from legal sources.”


* Some states, such as California, already require background checks, made through an FFL, for private-party transfers. But in many other states, a private party can still sell a firearm to another private party, provided there is compliance with applicable state and local laws.

Permalink Handguns, Hunting/Varminting, News 3 Comments »
February 13th, 2019

GUN INFO 101 — Headspace Defined and Illustrated

Ultimate Reloader Brownells headspacing go gage gauge barrel gunsmithing
This illustration shows headspace measurement for the popular .308 Winchester cartridge, which headspaces on the shoulder. Image copyright 2015 Ultimate Reloader.

In this Brownells Tech Tip, Brownells gun tech Steve Ostrem explains what headspace is and why it’s one of the most critical measurements for nearly all firearms. Even if you’re an experienced rifle shooter, it’s worth watching this video to refresh your understanding of headspace measurements, and the correct use of “GO” and “NO-GO” gauges.

Headspace Definition
In firearms, headspace is the distance measured from the part of the chamber that stops forward motion of the cartridge (the datum reference) to the face of the bolt. Used as a verb, headspace refers to the interference created between this part of the chamber and the feature of the cartridge that achieves the correct positioning. Different cartridges have their datum lines in different positions in relation to the cartridge. For example, 5.56x45mm NATO ammunition headspaces off the shoulder of the cartridge, whereas .303 British headspaces off the forward rim of the cartridge.

If the headspace is too short, ammunition that is in specification may not chamber correctly. If headspace is too large, the ammunition may not fit as intended or designed and the cartridge case may rupture, possibly damaging the firearm and injuring the shooter. (Source: Wikipedia)

Forster Headspace diagram belted magnum rimfire

Go gauge gage NOGO no-go field gaugesHeadspace Gauges
Headspace is measured with a set of two headspace gauges: a “Go” gauge, and a “No-Go” gauge. Headspace gauges resemble the cartridges for the chambers they are designed to headspace, and are typically made of heat-treated tool steel. Both a “Go” and a “No-Go” gauge are required for a gunsmith to headspace a firearm properly. A third gauge, the “Field” gauge, is used (as the name implies) in the field to indicate the absolute maximum safe headspace. This gauge is used because, over time, the bolt and receiver will wear, the bolt and lugs compress, and the receiver may stretch, all causing the headspace to gradually increase from the “factory specs” measured by the “Go” and “No-Go” gauges. A bolt that closes on “No-Go” but not on “Field” is close to being unsafe to fire, and may malfunction on cartridges that are slightly out of spec. (Source: Wikipedia)

To learn more, read Brownell’s longer article Headspace Gauges and How to Use Them. Among other things, this explains the relative lengths of “Go”, “No-Go”, and “Field” gauges. The “Field” is actually the longest: “The GO gauge corresponds to the SAAMI (Sporting Arms & Ammunition Manufacturer’s Institute) minimum chamber length, while the FIELD gauge usually matches the maximum chamber depth, or slightly less. NO-GO gauges are an intermediate length between minimum and maximum, that, technically, is a voluntary dimension. A firearm that closes on a NO-GO gauge and does not close on a FIELD gauge may not give good accuracy and may have very short cartridge case life from the ammunition re-loader’s standpoint.”

Permalink - Videos, Bullets, Brass, Ammo, Gunsmithing, Tech Tip No Comments »
February 13th, 2019

Save Money with Brownells Discount Codes

Brownells coupon shopping discount code June 2018

Shopping for gun parts, ammo, or reloading supplies? You will want to check out Brownells current Discount Codes. These Codes will qualify you for significant savings plus FREE Shipping. Use these Codes during check-out and the savings will reduce your net cost. Get up to $20 off on a $200 purchase — that’s a 10% savings. Plus the free shipping/handling could save you another $10-$20 easy. NOTE: Some of these discount codes may expire at any time, so don’t hesitate.

Coupon Code: M8Y — $20 off $200 + Free S/H
Expiration date: Unknown expiration

Coupon Code: NCS — $15 OFF $150 + Free S/H
Expiration date: Unknown expiration

Coupon Code: LAV — $10 OFF $100 + Free S/H
Expiration date: Unknown expiration

Coupon Code: NBM — $10 OFF $99 + Free S/H
Expiration date: Unknown expiration

Coupon Code: NEP — $10 Off $75 + Free S/H
Expiration date: Unknown expiration

Coupon Code: VB5 or M7R — Free S/H over $49
Expiration date: Unknown expiration

Permalink Bullets, Brass, Ammo, Hot Deals, Reloading No Comments »