July 14th, 2019

Sunday GunDay: “We the People” .284 Shehane F-Open Rifle

.284 Winchester Shehane F-Open F-Class 7mm Berger Panda F-Class Blake Machine
Jason Cohen’s “We the People” patriotic .284 Shehane F-Class rifle. It has already demonstrated great promise, scoring second place in its very first match, a 3×20 at 1000 yards in Wyoming.

Rifle Report by Jason Cohen
The rifle began its life as a Will McClosky Cerus stock. I approached Will at the Berger SW Nationals about a rifle I wanted to build. I wanted to do something different — PAINT it. He said he had just the stock that I could use, and sent that to Bryan Blake at Blake Machine. I chose Bryan for two reasons — first, I have shot with him a few times at National matches and he is approachable and very helpful. Second I visited his shop during the SWN in February and liked what I observed and how he approached things. Bryan never seems to be happy with the status quo. He is always trying new ideas.

I noticed that Bryan had been adding aluminum rails to the front of Cerus stocks to lower the center of gravity and improve tracking. I asked him to modify my stock and fit it with the new forearm rails, shown in the photo below. I sent him a Panda F-Class action with a +20 MOA Picatinny rail. Bryan did all the stock work and fitted the action, rails, and RAD recoil pad. Everything turned out flawless.

.284 Winchester Shehane F-Open F-Class 7mm Berger Panda F-Class Blake Machine

The barrel is a Blake Machine 1:8″-twist finished at 32 inches. It was fitted to my action by Dale Woolum of Woolum Accuracy. Dale chambers all my barrels on all my rifles. Dale also threaded the barrel for a Woolum Accuracy tuner. This has proven to be a valuable tool in my load development. On this build, I am trying a Bix’N Andy trigger for the first time.

.284 Winchester Shehane F-Open F-Class 7mm Berger Panda F-Class Blake Machine

The 284 Shehane has a proven record of accomplishments and that is why I have chosen it. I use Lapua brass (6.5-284 necked-up), CCI BR-2 primers, Hodgdon H4350 powder, and Berger 184gr bullets. All these components have been a successful combination that has worked flawlessly in my other rifle.

.284 Shehane Load Development
Load development for me starts with each new barrel. I screw on the new barrel, fire 25 rounds of whatever I have left over and then clean it. I push out to 600 yds and do a ladder test in round-robin format. I start 0.6 grains lower than my last charge that worked. I work up from that reduced charge weight in increments of 0.3 grains. The paper tells the rest of the story. Once I get something that works well at 600 yards I go back in work around that by 0.1 grains. After that I play a little with seating depth and look for a change. I will occasionally mess with the tuner and tighten things up if possible.

.284 Winchester Shehane F-Open F-Class 7mm Berger Panda F-Class Blake Machine

About the Patriotic Paint Job
So I had the idea of painting the stock because there are so many wood stocks with clear coat these days. Unless you really get some exotic woods they all seem to blend together. I have nothing against clear-coated wood, but I wanted something different, as this was my first all-wood rifle. (For short-range benchrest, I was shooting a Bob Scoville carbon stock and Terry Leonard laminate).

We started with all white on the stock and came up with the idea of an American Flag on the buttstock. I was thinking of ribbons on the front in red and blue but we could not get the layout right. Then the idea of “We the People” popped into the head. My painter said “awesome!” and he was able to airbrush the stock with a little yellow and brown to give it that vintage paper look.

.284 Winchester Shehane F-Open F-Class 7mm Berger Panda F-Class Blake Machine

The front rest is a SEB Max (see above). I chose the Max because I was shooting Group Benchrest first then made the transition to F-Class. This rest proves to be versatile in all my shooting — Short- and Long-Range Benchrest AND F-Class. The rear bag is a Edgewood EDGEbag Gator. The gun gets transported in a Pelican Hard case when I travel. Locally, I use a Champions Choice soft bag.

Jason Jumped to Open Class after Starting with F-TR
This “We the People” rifle will be one of my primary rifles for F-Open competition. I will run it through its paces shortly and see how well it does. I have high hopes of it being an great gun. I shoot primarily local and regional matches — Colorado, Wyoming, and possibly Nebraska this summer. I will travel to the F-Class Nationals in Raton as well. I used to shoot F-TR before this and made the transition to Open last season. This is my second season shooting F-Open. 2018 was my first National event and was a learning experience for me. But I was hooked after that match.

Tips for F-Class Competitors
Get some good equipment and eliminate having issues that can be caused by budget builds. It’s OK to be frugal, but sometimes cutting corners will cause you more problems and have you chasing your tail. If you’re looking for the “recipe for success”, get a good action plus a top-tier barrel and great glass.

.284 Winchester Shehane F-Open F-Class 7mm Berger Panda F-Class Blake Machine

The .284 Shehane — Accurate and Forgiving Wildcat
The 284 Shehane is amazing, very forgiving and not temperamental. I choose this because I really did not know otherwise and was steered to the Shehane by a friend. Its proven track record helped as well. Straight .284 or Shehane — you cannot go wrong. I run a 184gr Berger at about 2850 FPS and get great brass life in my other rifles. I usually start to consider tossing the brass around 15 firings. Primer pockets start to get a little looser and the brass seems to need more sizing than the newer brass with less firings.

.284 Shehane Win Winchester F-class F-Open wildcat load development

Permalink - Articles, Competition, Gear Review, Gunsmithing No Comments »
July 14th, 2019

Zeiss Offers New ZMOA-T Series Thin-Line Reticles

Zeiss new reticle ZMOA Zmoa-t20 zmoa-t30 windage thin line

ZEISS has introduced new, intuitive thin-line reticles that allow faster aiming with “smart” hold-overs and hold-offs. The new thin-line ZMOA-T20 and ZMOA-T30 second focal plane (SFP) reticles provide an unobstructed view of the target, while providing MOA-based hold-over lines and wind-hold markers. This allows for fast follow-up shots with corrected windage holds.

Zeiss new reticle ZMOA Zmoa-t20 zmoa-t30 windage thin lineOn both horizontal and vertical lines there are marks with one MOA spacing, plus MOA reference numbers placed every two MOA. The center cross “floats” to aid ultra-precise shot placement. The small dots located left and right of the main vertical centerline allow the shooter to make windage holds and gauge bullet impacts with confidence. The MOA reference marks and indicators subtend accurately at the riflescope’s highest magnification setting.

The “T20″ and “T30″ codes indicate the MOA “value” of hash marks available below the reticle’s horizontal centerline, i.e. 20 MOA and 30 MOA. The Conquest V4 4-16x44mm boasts the ZMOA-T30 reticle, while the Conquest V4 6-24x50mm model incorporates the ZMOAi-T20 illuminated reticle. On the illuminated ZMOAi-T20 Zeiss scope, the small center cross-hair (shown in red) illuminates for low-light applications.

Zeiss new reticle ZMOA Zmoa-t20 zmoa-t30 windage thin line

CLICK HERE for ZMOA-T Information Brochure »

Permalink Hunting/Varminting, New Product, Optics No Comments »
July 14th, 2019

Save Time and Bullets — Fire-Form with your Fouler Shots

Fire-forming fouler barrel life fouling shots

PPC Fire-formingHere’s a tip for guys who shoot the 6 PPC, 6 Dasher, 6 BRA, .284 Shehane, or other wildcat cartridges that require fire-forming. Use your fouler shots to fire-form new cases. That way your fouler shots do “double-duty” and you get your brass fire-formed without putting extra rounds through your expensive barrel.

This procedure is recommended by Joel Kendrick, the 2004 IBS 600-yard Shooter of the Year. After he cleans his barrel, Joel knows it takes two or three shots to foul in the bore before accuracy returns. When shooting his PPC, Joel uses those fouler shots to fire-form his new brass. Joel explains: “I like to have relatively new brass always ready. By fire-forming a couple cases after each barrel-cleaning during a match, by the end of the weekend I’ve got a dozen or more freshly fire-formed cases to put into the rotation. If you do this with your fouler shots you get your fire-forming accomplished without using up any extra barrel life.”

This not only saves barrel wear, but it saves you trips to the range for the purpose of fire-forming. We thank Joel for this smart suggestion. For those who do not have a dedicated barrel for fire-forming, this should help keep your round-count down. Note: With this fouler fire-forming routine, you should ALWAYS do the fire-forming with the SAME POWDER you load for your match ammo. Joel currently works as the Supplier Quality Process Engineer for MMI-TruTec, a company that offers barrel surface coatings that can further extend your barrel life.

Permalink Bullets, Brass, Ammo, Reloading, Shooting Skills No Comments »