Eurooptic vortex burris nightforce sale




teslong borescope digital camera barrel monitor


As an Amazon Associate, this site earns a commission from Amazon sales.









September 8th, 2019

Sunday GunDay: 6mm Dasher Winner From Forum Classifieds

Bob A. 6mm Dasher Sacramento F-Class March Madness

With the 6mm Dasher cartridge becoming popular with PRS/NRL competitors as well as the benchrest crowd, we thought it was time to re-visit a special rifle chambered for the 6mm Dasher wildcat. This gun has a great story behind it. Forum member Bob A. (aka “Killshot”) used his “Forum Classifieds Special” to beat all comers in the F-Class Division in the American-Canadian Match and the Long Range Regional Match in 2013 in Sacramento, CA.

Bob’s 6mm Dasher sports a blue-printed Rem 700 action. Who says you need a high-dollar custom action to run with the big dogs? In fact, this same gun, built with components sourced from AccurateShooter Forum Classified Ads, set a Sacramento F-Class range record of 200-17X a few years back. In this story, Bob talks about the build, and he explains his methods for loading ultra-accurate Dasher ammo.

Bob A. 6mm Dasher Sacramento F-Class March Madness

Bob’s Budget-Build Dasher F-Classer
I wanted to build a proper rifle for F-Open but needed to keep it simple and, well, cheap. I found a solid “base” to build on in the form of a Dave Bruno-built, “pre-owned” 6-6.5×47 Lapua that I located in the AccurateShooter Forum classifieds in late 2011. The base action was a trued and blue-printed Remington 700 receiver circa 1971 with a spiral-fluted bolt. It was in a Shehane ST1000 stock painted sky blue and had a Jewell 1.5-oz BR trigger. I sent the bolt to Greg Tannel (Gretanrifles.com) to have the firing pin hole bushed and sleeved, the ejector removed and the hole filled and the face trued. I upgraded to Tannel’s Light Steel firing pin assembly while it was out.

Having the working bits completed, I needed a barrel. So I went to the AccurateShooter classifieds again and found a 1:8″-twist, 30″ x 1.25″ (diam.) Bartlein with a 0.236″-land bore. I called Dave Kiff and explained my pursuit and he recommended his PT&G “world record” 6 Dasher reamer (.2704″ no-turn neck and .104″ freebore). A month or so later the reamer and gauges arrived.

I had the barrel chambered by Marc Soulie of Spartan Precision Rifles (510-755-5293, Concord, CA). Marc is a great builder and I’m pleased to call him a friend.

Bob A. 6mm Dasher Sacramento F-Class March Madness

The rifle got its good looks from a Pennsylvania artist named Kenny Prahl. His Prahl Designs shop (724-478-2538) added the white ghost-flames over the existing sky blue metallic paint.

Looks Great, Shoots Better
Fire-forming showed great promise — ten-shot groups of half an inch at 200 yards were typical. I lost only one case to a split neck and the “blow lengths” are good and consistent. This was followed up with load development which saw 100-yard, five-shot groups in the .1s and .2s as the rifle showed its preference for Reloder 15 over Varget powder, and for CCI 450s over all other primers. The bullet of choice was the ever-popular Berger 105gr Hybrid Target.

Bob A. 6mm Dasher Sacramento F-Class March Madness

In February 2012 I began shooting the Dasher in monthly club matches at the Sacramento Valley Shooting Center, the home range of a number of excellent F-Class, Benchrest and High Power shooters. Using a Farley Coaxial rest up front (also picked up from a WTB ad on AccurateShooter’s Forum) and an Edgewood bag in the back, I gradually improved my gun-handling to the point where I could shoot a respectable score. This was very different from the bipod shooting I’d done in the past in F/TR.

Bob A. 6mm Dasher Sacramento F-Class March Madness


Bob A. 6mm Dasher Sacramento F-Class March MadnessDasher Loading Tips
My chamber is set up for blue box Lapua 6mmBR brass. My case preparation is straight-forward. I fire-form with virgin cases right out of the box. I don’t size them but I will give the primer holes a good look and clean up the flash hole with a .058″ bit in a pin vise. To fire-form, I seat a Berger 108gr BT .030″ into the lands over a standard 6mmBR load of Varget.

For match loads, I use Alliant Reloder 15. While Varget is less sensitive to temp changes, RL15 has given me lower extreme spreads and better long range control. [Bob acknowledges that every barrel is unique, so a different powder, such as H4895 might work better for you.]

I clean my fired cases with stainless steel media in a Thumler’s rotary tumbler after every firing. I anneal after every other firing using a Bench-Source machine which is very well made and easy to operate. I use a Whidden full length bushing die with Redding bushings for sizing.

After sizing, I chamfer the inside of the neck with the K&M tool which has a pilot rod centered in the flash hole. Then I’ll give the neck and mouth a “once over” with some 0000 steel wool. I finish loading off with a Redding Competition Seating Die with the micrometer top.

Bob A. 6mm Dasher Sacramento F-Class March MadnessI use a carbide ball on the expander rod of the full length sizing die. I use a .266″ TiN-coated bushing and the ball just kisses the inside walls of the sized neck. I get very consistent neck tension this way and have had no issue with split necks.

Seating Depth Considerations
With fire-formed brass, the junction of the bullet’s bearing surface and boat-tail is above the neck/shoulder junction of the case, so I have no issues with donuts. You can see how a loaded round looks in the photo at left. For occasional trimming, I use a very nice little Possum Hollow trimmer that indexes on the case shoulder.

Permalink Bullets, Brass, Ammo, Competition, Tech Tip 1 Comment »
September 8th, 2019

Get Ready for Hunting Season — Resources for Hunters

hunting safety 2019 checklist hunter license
Hunting Season has already started in some states, and is right around the corner in other locations. For readers who plan to hunt game this fall, we recommend you brush up on hunter safety and learn the laws in your jurisdiction. Here are some helpful resources for hunters: Safety Tips, Hunter Eduction, License Requirements, and Where-to-Hunt interactive map. Top photo courtesy Horn Fork Guides, Ltd., in Colorado.

Hunter Safety Tips
NRAFamily.org has a good article listing seven salient safety tips for hunters. Anyone preparing for a fall hunt should read this article before heading into the field. Here are three key bits of advice:

1. Be Positive of Your Target before Shooting
This might sound overly simplistic, but the fact remains that, every year during whitetail season, farmers everywhere are forced to spray-paint their cattle or risk having them “harvested” by hunters who don’t bother confirming the species of the large ungulate in their sights. Why does this happen? The most likely explanation is “buck fever,” meaning that the hunter wants so badly to see a nice big buck that sometimes his eyes deceive him into thinking that there’s one there. When in doubt, don’t shoot.

2. Scopes Are Not Binoculars
Never use a riflescope as a substitute for binoculars. The temptation to do so is real, but when one does this, one is by definition pointing the muzzle of the gun at unknown targets.

3. Know When to Unload
When finished hunting, unload your firearm before returning to camp. You should also unload your gun before attempting to climb a steep bank or travel across slippery ground.

Where to hunt hunting license state information NSSF

Visit WhereToHunt.org

There’s a great online resource for hunters that will help you find game locations in your state and ensure you have all the proper permits and game tags. WheretoHunt.org features an interactive map of the country. For all 50 states, the NSSF has compiled information about hunting license and permits, where to hunt, hunter education classes, laws and regulations and more. For each state you’ll also find a link for required applications and license forms.

Click Map to Get State-by-State Hunting INFO
Where to Hunt hunting license game location

Hunting Affiliation Groups
There are many good organizations dedicated to promoting hunting and preserving our hunting habitats. These groups all offer valuable information for hunters:

Ducks Unlimited
Mule Deer Foundation
National Wild Turkey Federation
Pheasants Forever
Quail Forever
Rabbits Unlimited
Safari Club International
Squirrels Umlimited
Varmint Hunters Association
Whitetails Unlimited

Recommended Books about Hunting

There’s no shortage of hunting hunting-related reading material. Here are some of the best books written about hunting.

Hemingway on Hunting by Ernest Hemingway

A Sand County Almanac by Aldo Leopold

Meditations on Hunting by Jose Ortega y Gasset

It’s Only Slow Food Until You Try to Eat It by Bill Heavey

The Beginner’s Guide to Hunting Deer for Food by Jackson Landers

Whitetail Nation: My Season in Pursuit of the Monster Buck by Peter Bodo

Beyond Fair Chase: The Ethic and Tradition of Hunting by Jim Posewitz

Permalink Hunting/Varminting, News, Shooting Skills No Comments »
September 8th, 2019

Gun Rights Policy Conference Sept. 20-22 in Phoenix, Arizona

Gun rights policy conference

With guns and the Second Amendment in the political crosshairs this year, and with gun control promising to be a major issue in the 2020 national elections, the Second Amendment Foundation (SAF) and Citizens Committee for the Right to Keep and Bear Arms are expecting great interest in this year’s 34th annual Gun Rights Policy Conference (GRPC). The 3-day event will be held Friday through Sunday, September 20-22, 2019 in Phoenix, Arizona. If you will be near Phoenix, you may want to attend — admission is free! It’s not too late to register on-line at SAF.org/grpc.

If you can’t attend, much of the Conference will be live-streamed on the SAF website.

This year’s Conference will examine background checks, city gun laws, concealed carry, federal legislation, gun show regulation, and state and local activity. Noted speakers at the Gun Rights Conference will include: SAF founder and Executive Vice President Alan M. Gottlieb, Tom Gresham (Gun Talk), Mark Walters (Armed America Radio), and AWR Hawkins of Breitbart.com. In addition, SAF and CCRKBA leaders will be joined by representatives from Gun Owners of America, the National Rifle Association, Doctors for Responsible Gun Ownership and Jews for the Preservation of Firearms Ownership.

Gun rights policy conferenceThe 2019 GRPC will feature panel discussions on state and national political issues ranging from gun rights to the 2020 elections outlook, legal battles and legislation. Almost 1,000 gun owners, activists and experts from across the country are pre-registered to attend. Interest has been fueled by calls from Democratic presidential candidates for confiscation of semi-automatic firearms and other draconian new laws.

The conference will be held at the Sheraton Crescent Hotel, 2620 W Dunlap Ave., Phoenix, AZ 85021. It is co-sponsored by SAF and CCRKBA. “Just like last year’s record-setting conference,” Gottlieb said, “we will be live-streaming this year’s event and we anticipate more than 100,000 viewers. We look forward to seeing everyone.”

Permalink Handguns, News 1 Comment »