October 26th, 2019

Federal Now Offers Custom-Loaded Precision Ammunition

Federal custom handloading center hand-loaded rifle shotshell ammo ammunition Berger Sierra Nosler

Don’t have time to hand-load your own ammo, or don’t have all the equipment and dies needed? There’s a new option — something that’s actually quite revolutionary in the ammo industry. Federal is now offering custom-loaded ammunition. You choose the cartridge type and bullet type and Federal technicians put the ammo together. Think about it — this could be an interesting option for hunters who only need a few rounds a year, or if you want to try out a bullet/cartridge combo for the first time.

Order Federal Custom Ammunition ONLINE through the Federal Custom Shop.

Federal custom handloading center hand-loaded rifle shotshell ammo ammunition Berger Sierra Nosler

“Each round is painstakingly handloaded to order by our team of expert engineers in our state-of-the-art reloading workshop. Veteran craftsmen combine the best components with extra quality checks at every stage for the most consistent velocity, accuracy, and overall performance. Loads are then hand-checked for final inspection and cleaned before being custom-packed in durable, personalized packaging.”

10 Centerfire Cartridge Types and Many Bullet Options
Currently, you can choose from 10+ rifle cartridge types and a wide selection of quality bullets from Berger, Sierra, Nosler, Federal, Barnes, Swift, and more. Along with rifle ammo, Federal will offer custom TSS Shotshells. NOTE: Federal Custom Shop ammo will be sold direct-to-consumer only.

Right now, centerfire rifle shooters can choose more than 10 different cartridges including 6.5 Creedmoor, 6.5-284 Norma, 257 Weatherby, 243 Winchester, 257 Roberts +P, and more. Shotshell customers can custom order a large variety of 10-gauge and 28-gauge loads.

“If it’s not in Federal’s vast catalog as factory-loaded ammo, we may have it listed on our website as a load we will custom hand-load for you,” notes Federal Ammunition President Jason Vanderbrink. “For example, Barnes 120-grain Tipped TSX in 6.5-284 Norma and 28-gauge TSS turkey loads aren’t products we list in our catalog, but you can certainly order them through our Custom Shop.”

The Custom Shop handloading center is located at Federal’s main factory in Anoka, Minnesota. For more information, including how to order, what specific load options are available, and shipping details, visit: FederalPremium.com/custom-shop.html.

Federal custom handloading center hand-loaded rifle shotshell ammo ammunition Berger Sierra Nosler

Permalink Bullets, Brass, Ammo, New Product, News, Reloading No Comments »
October 26th, 2019

Reloading Rescue — How to Remove a Case Stuck in a Die

stuck72

Western powders, ramshot, norma, accurate

To err is human… Sooner or later you’ll probably get a case stuck in a die. This “fix-it” article, which originally appeared in the Western Powders Blog, explains the procedure for removing a firmly stuck cartridge case using an RCBS kit. This isn’t rocket science, but you do want to follow the directions carefully, step-by-step. Visit the Western Powders Blog for other helpful Tech Tips.

Curing the Stuck Case Blues

decapstem72Sticking a case in the sizer die is a rite of passage for the beginning handloader. If you haven’t done it yet, that’s great, but it probably will eventually happen. When it does, fixing the problem requires a bit of ingenuity or a nice little kit like the one we got from RCBS.

The first step is to clear the de-capping pin from the flash hole. Just unscrew the de-capping assembly to move it as far as possible from the primer pocket and flash hole (photo at right). Don’t try to pull it all the way out. It won’t come. Just unscrew it and open as much space as possible inside the case.

Place the die upside down in the padded jaws of a vise and clamp it firmly into place. Using the supplied #7 bit, drill through the primer pocket. Be careful not to go too deeply inside the cartridge once the hole has opened up. It is important to be aware that the de-capping pin and expander ball are still in there and can be damaged by the bit.

Drill and Tap the Stuck Case
taping72drilling72

Once the cartridge head has been drilled, a ¼ – 20 is tap is used to cut threads into the pocket. Brass is relatively soft compared to a hardened tap, so no lube is needed for the tapping process. RCBS says that a drill can be used for this step, but it seems like a bit of overkill in a project of this nature. A wrench (photo above right) makes short work of the project.

RCBS supplies a part they call the “Stuck Case Remover Body” for the next step. If you are a do-it-yourselfer and have the bit and tap, this piece is easily replicated by a length of electrical conduit of the proper diameter and some washers. In either case, this tool provides a standoff for the screw that will do the actual pulling.

pulling72fingers72

With an Allen Wrench, Finish the Job
Run the screw through the standoff and into the tapped case head. With a wrench, tighten the screw which hopefully pulls the case free. Once the case is free, clamp the case in a vice and pull it free of the de-capping pin. There is tension here because the sizing ball is oversized to the neck dimension as part of the sizing process. It doesn’t take much force, but be aware there is still this last little hurdle to clear before you get back to loading. Don’t feel bad, everyone does this. Just use more lube next time!

wholekit72unstuck72

Article find by EdLongrange. We welcome reader submissions.
Permalink - Articles, Bullets, Brass, Ammo, Tech Tip No Comments »
October 26th, 2019

Bargain Boresighters — Laser Boresight Systems $14.99

Sportsman's Guide laser boresighter bore sight chamber lazer
With good factory rifle ammo costing $1.00 per round — a Laser BoreSighter could pay for itself in just a couple range sessions.

Laser BoreSighters — fitted to your chamber — help you get on target more quickly, particularly with factory firearms. Just activate the unit, slip it into the chamber and look for the red dot on the target. The laser dot is about 2″ in diameter at 100 yards, and is visible even in full sunlight. Right now you can get HQ Issue BoreSighters for just $14.99 at Sportsman’s Guide (member price is $13.49). These units have a durable brass metal body and the battery will run an hour.

Boresighters are offered for numerous popular rifle cartridge types including: .223 Rem, .22-250, 6.5 Creedmoor, .308 Win family, and .30-06 (full list below). Sportsman’s Guide also offers Pistol Laser BoreSighters for $14.99 (pistol chamberings: .38 SPL/.357 Mag, .40 SW, .44 Magnum, .45 ACP).

Sportsman's Guide laser boresighter bore sight chamber lazer

In-chamber BoreSighters are much safer than the kind that you insert in the end of the barrel (or attach to muzzle). If you forget your laser bore-sight placed in the end of the barrel, and then fire a round, you can blow up your barrel and/or suffer serious injury — it HAS happened,.

Rifle and Shotgun Cartridge Types:
.223 Rem
.22-250
6.5 Creedmoor
7mm Mag (also .264 Mag, .338 Mag)
7.62×54
.30-30
.303 British
.308 Win (also .243, .260, 7mm-08)
.30-06 (also .25-06, .270 Win, .338-06)
.300 Win Mag
20 Gauge Shotgun
12 Gauge Shotgun
Permalink Gear Review, Handguns, Hot Deals, News No Comments »