As an Amazon Associate, this site earns a commission from Amazon sales.











July 23rd, 2021

F-Class NRA Championships at Camp Atterbury Are Underway

NRA F-Class 2021 Camp Atterbury

America’s top F-Class shooters are in position with targets in sight right now. The shooting phase of the 2021 NRA F-Class National Championships commenced today, July 23rd, with the first scored relays of the Mid-Range Championship, held at Camp Atterbury in Indiana. The Mid-Range event runs through July 26 with the Mid-Range Team Match. The Long Range F-Class National Championship then commences on July 27th, and runs through July 30, with the Team Match on July 29, 2021.

NRA F-Class 2021 Camp Atterbury

F-Class National Championship event schedule from the NRA National Match Calendar:

NRA F-Class national championship

F-Class National Championships Camp Atterbury Indiana
The 2021 NRA F-Class Nat’l Championships at Camp Atterbury are underway. The Mid-Range F-Class Nationals run July 22-26, 2021, while the Long Range F-Class Nationals take place July 27-30, 2021.

Camp atterbury indiana satellite map

Lodging Options at Camp Atterbury — Summer 2021
Shooting Sports USA (SSUSA) recently released information on the NRA Championships at Camp Perry. The SSUSA article states: “As for lodging, there are several options. The most convenient are on-base, with Camp Atterbury offering hotel-style buildings with suites, along with standard rooms, and ‘open military squad bay’-style quarters available by reservation. Camp Atterbury also offers a limited number of RV spots, plus the MWR campground and cabins. NOTE: Lodging is controlled by the Camp Atterbury Lodging Office, not the NRA.

Click Photo for Large Map of Camp Atterbury, Indiana
NRA national match championships camp atterbury 2021

Smallbore F-Class National Championship

It is not well-known, but the NRA recognizes a .22 LR Rimfire F-Class discipline. And this year Camp Atterbury hosted the F-Class Smallbore Championship. Turnout was fairly meager for this event, with only 17 competitors. But every match needs a start, and we expect smallbore F-Class to become considerably more popular in years to come. The match involved three stages, with targets at 50 yards, 50 meters, and 100 yards. The 2021 Smallbore F-Class Championships, part of the NRA National Matches, were held July 12-16 at Camp Atterbury, near Edinburgh, Indiana.

.22 LR Rimfire F-Class NRA Championship 2021
Cole McCullough photo from SSUSA.org

.22 LR Rimfire F-Class NRA Championship 2021Shane Collier won the 2021 NRA Smallbore F-Class National Championship with a 6363-479X Score, also winning High Civilian honors. William Treder finished second with a score of 6359-473X. Treder was High Senior. The High Women was Barbara C. Hampson with 6287-349X. Since 2019, the Marianne Jensen Driver Memorial Trophy has been awarded to the NRA Smallbore F-Class National Champion.

The Smallbore F-Class Nationals were fired over four days at distances of 50 yards, 50 meters and 100 yards. The event was shot at the new, modern covered ranges at Atterbury, which were also used for the NRA position-shooting smallbore championship.

FULL RESULTS for Smallbore F-Class Nat’l Championship

MORE PHOTOS from All NRA Smallbore Nat’l Championships

Permalink Competition, News No Comments »
July 23rd, 2021

How to Select and Set Up a Decapping Die

universal Decapping die sinclair lee redding

One of our Forum members complained that he wasn’t able to set his primers flush to the rim. He tried a variety of primer tools, yet no matter what he used, the primers still didn’t seat deep enough. He measured his primers, and they were the right thickness, but it seemed like his primer pockets just weren’t deep enough. He was mystified as to the cause of the problem.

Well, our friend Boyd Allen diagnosed the problem. It was the decapping rod. If the rod is adjusted too low (screwed in too far), the base of the full-diameter rod shaft (just above the pin) will contact the inside of the case. That shaft is steel whereas your case is brass, a softer, weaker metal. So, when you run the case up into the die, the shaft can actually stretch the base of the primer pocket outward. Most presses have enough leverage to do this. If you bell the base of the primer pocket outwards, you’ve essentially ruined your case, and there is no way a primer can seat correctly.

The fix is simple. Just make sure to adjust the decapping rod so that the base of the rod shaft does NOT bottom out on the inside of the case. The pin only needs to extend through the flash hole far enough to knock the primer out. The photo shows a Lyman Universal decapping die. But the same thing can happen with any die that has a decapping rod, such as bushing neck-sizing dies, and full-length sizing dies.

Universal decapping die

Whenever you use a die with a decapping pin for the first time, OR when you move the die to a different press, make sure to check the decapping rod length. And it’s a good idea, with full-length sizing dies, to always re-check the height setting when changing presses.

There are a variety of decapping dies currently on the market, with models available from Lee, Lyman, Hornady, RCBS, Redding, and Sinclair Int’l.

Lee Universal Decapping Die on SALE for $10.96
Speaking of decapping tools, Midsouth Shooters Supply sells the Lee Universal Decapping Die for just $10.96 (item 006-90292), a very good deal. There are many situations when you may want to remove primers from fired brass as a separate operation (prior to case sizing). For example, if your rifle brass is dirty, you may want to de-cap before sizing. Or, if you load on a progressive press, things will run much more smoothly if you decap you brass first, in a separate operation.

Lee universal decapping die

Decapping Dies for Cases with Smaller Flashholes

TAKE NOTE: Some Euro Small Flash Holes are spec’d at 1.5mm or 0.059″, and max out at about .062″, so these need a smaller die pin.

The low-cost Lee Universal Decapping Die will work with cartridges from 17 Fireball all the way up to big Magnums. However, NOTE that the decapping pin supplied with this Lee die is TOO LARGE for LAPUA 220 Russian, 6mmBR, 6.5×47, 6.5 Creedmoor, .308 Win (Palma) and Norma 6 PPC flash holes. Because the pin diameter is too large for these brass types, you must either turn down the pin, or decap with a different tool for cases with .059-.062″ flash-holes.

Sinclair Int’l offers a Stainless Decapping Die that comes with both .080 and .060 Pins. The $39.99 die ships with three decap pins for standard .080″ flash holes, and two pins for .060″ flash holes

Redding makes a Universal Decapping Die with an optional smaller-diameter decapping rod for the smaller .059-.062″ flash holes found on the BR and PPC cases. The use of this die is explained in the video below:

Permalink - Videos, Bullets, Brass, Ammo, Reloading, Tech Tip No Comments »
July 23rd, 2021

Dry Lube Inside Case Necks for Smoother Bullet seating

Forster original caseneck case neck brass dry mica lube lubricator system

If you want smoother bullet seating, inside neck lube can help. Forum member Ackleyman II likes to add a little Mica powder inside his case necks before seating bullets. This is easily done with the Forster three-brush neck lube kit. Ackleyman tells us: “Many loads that I have will not shoot well with a dry neck compared to a neck that is cleaned and lubed with this [Forster Dry Lubricator] — the best $15 you have ever spent.”

The Forster Case Neck Lubricator features three brushes attached to a tough, impact-resistant case with holes for bench mounting. The brushes accommodate all calibers from 22 to 35 caliber. The kit includes enough “motor mica” to process 2000 to 3000 cases and has a cover to keep dust and grit from contaminating the mica. By moving the case neck up and down on the correct mica-covered brush, the neck can be cleaned and lubricated at the same time.

Function: Lubricate case necks for easier resizing
Contents: Kit with base, lid, and three nylon brushes
Lubricant: Includes 1/10 oz. of Motor Mica, enough to process 2000-3000 cases

Neck Lubrication After Ultrasonic Cleaning or Wet Tumbling with Pins
If you wet-tumble your cases with stainless media and solvents or ultrasonically clean your brass, you may find that the inside of the case necks get too “squeaky clean”. The inside surface of the neck looses lubricity. In this situation, applying a dry lube can definitely be beneficial. CLICK HERE to see story about ultrasonic cleaning.

Ultrasonic Brass Cleaning

ultrasonic brass cleaning neck lubricant moly dry lube

Permalink Bullets, Brass, Ammo, Reloading, Tech Tip No Comments »