February 27th, 2022

Sunday Gunday: The Smallest 100-yard 5-Shot Group in History

world record Michael stinnett group .0077
Look and be amazed! In competition, a rifle drilled FIVE perfectly-overlapped bullet holes — the last virtually indistinguishable from the first — at a target a football field (100 yards) away.

Today we feature a benchrest rifle that earned its place in history by setting a small-group record in 2013 that may never be broken. This .30-caliber benchrest rig shot a 0.0077″ five-shot group at 100 yards. That’s the smallest 100-yard group ever shot in competition by ANY gun at 100 yards in history. And we may never see anything smaller in our lifetimes.

Record .008 .0077 group rifle

In setting that .0077″ (seventy-seven ten-thousandths of an inch) record, the shooter, Mike Stinnett, broke a record that stood for four decades — the 0.009″ five-shot group credited to Mac McMillan. The previous NBRSA Light Varmint Record of .009″ for five shots (at 100 yards) was set on 9/23/1973, 49 years ago. Experts considered that record “untouchable”, “unassailable” — in other words “unbreakable.” But Mike broke Mac’s record 40 years after it was set.

The Record-Setting Rifle and Cartridge
The gun that produced the historic .0077″ group was a Light Varmint-class Benchrest rifle chambered as a .30-caliber wildcat, the 30 Stewart. That cartridge is based on the 6.5 Grendel case necked up. The load had Hodgdon H4198 powder behind BIB 114gr, 10-ogive bullets. Notably, the record-setting ammo was pre-loaded before the match.

The Smallest 100-yard Group in History

All target shooters strive for perfect shot placement. Well one man has come closer to perfection than any other shooter who ever lived. You are looking at Michael Stinnett’s .0077″ NBRSA world-record group, the smallest 100-yard 5-shot group ever shot in the history of rifle competition. The group was certified at .0077″ (though labeled .008″ on the range-signed target below). A moving backer verified that this was FIVE shots — no question about that. You may be surprised but this was NOT shot by a 6 PPC, but rather a .30-caliber wildcat, based on the 6.5 Grendel.

world record Michael stinnett group .0077

Group Is Smaller than ANY 100-yard Group Shot in ANY Class

Mike’s amazing group stands as a NBRSA Light Varmint Class record. But it is also smaller than the current NBRSA 5-shot, 100-yard records for ALL other classes, even Unlimited (Rail Gun). Likewise Stinnett’s .0077″ group is smaller than the IBS records for ALL classes:

Official Benchrest 5-Shot 100-Yard World Records
Sanction Light Varmint Heavy Varmint Sporter Unlimited
NBRSA 0.0077″ Mike Stinnett 0.027″ Ralph Landon 0.041″ Jerry Thornbrugh 0.049″ Gary Ocock
IBS 0.051″ Mark Shepler 0.052″ J. Ventriglia 0.060″ J. Neary 0.045″ Gary Ocock


All NBRSA Group Size Records | ALL IBS Group Size Records

Better than any Rail Gun too — Mike Stinnett’s .0077″ group was smaller that ANY group shot in ANY class — event Unlimited Rail Guns, as shown below:

Below is a larger-than-life-size view. Using this photo we measured the group with target-calculating software, and it came out .006″ (the software only goes to three digits). We recognize that it would be much better to work from the real target rather than a photo, so we are not challenging the official measurement in the least. But this does confirm that this is a phenomenally small five-shot group.

world record Michael stinnett group .0077

kelbly speedy shorty panda action

Stinnett Sets .0077″ Record with a .30-Caliber Modified Grendel Cartridge, Pre-Loaded
Many folks have asked about the gun and ammo that produced the .0077″ group. The rifle was chambered as a .30-caliber wildcat, the 30 Stewart, which is based on the 6.5 Grendel case necked up. Mike was using Hodgdon H4198 powder behind BIB 114gr, 10-ogive bullets. Notably, the record-setting ammo was pre-loaded before the match. Unfortunately, we don’t have a photo of the target yet — it is still in the hands of the official NBRSA certification committee. However, Mike has been kind enough to tell us about his rifle and his load.

Mike Stinnett .0077″ Record Group Equipment Report

Mike reports: “Several guys have asked so here is my equipment listing. The hardware build actually started in 2008 with the goal of building two identical Benchrest rifles which could be used for both group and score. The idea was to shoot 6PPC and a .30 Cal without a base rifle change.”

Record-Setting Rifle Equipment and Components

Action: Kelbly Panda “Speedy Shorty” with solid bolt and PPC-diameter bolt face. Kelbly was asked to build several actions which were identical with the intent to eliminate any variance in head space between the two new rifles. This helped me use a single set-up on sizing dies for both rifles and ammo is interchangeable. Both actions were sent to Thomas ‘Speedy’ Gonzalez to be blue-printed and have Jewell triggers installed.

Reamer: 30 STEWART (I just call it a 30 PPC as that is what everyone expects, but it is in fact a custom design and Ralph deserves about 99% of the credit).

Barrels: Krieger was selected for the barrels. After discussions with Randy Robinett of BIB Bullets, a 1:17″ twist was identified as the correct, safe solution. Ralph Stewart has cut all my chambers using a custom-designed reamer. [Our goal] was consistent headspace and Ralph has been able to keep my barrels within .0002 variance. The barrel tuner also comes from Ralph Stewart.

  • Stock: Larson (including action bedding)
  • Scope: Leupold 45X Competition in Kelby Single Screw Tall Rings
  • Brass: Lapua (Base case is 6.5 Grendel)
  • Bullets: Randy Robinett (BIB) 30 Cal. 114gr, 10 Ogive (secondary bullet; primary is 112gr BIB)
  • Powder: H4198 – Stout Load with 2980 FPS Velocity
  • Front Rest: Farley Coaxial
  • Bags: Micro Fiber
  • Flags: Graham Wind Flags (large)

About the Cartridge — 30 Stewart (Based on Lapua 6.5 Grendel Parent Brass)
Mike explains: “Our goal was to shoot H4198 as the optimal powder for stability. There were several versions of the reamer before we settled on the current configuration. I am optimized for the 10 Ogive BIB bullet, powder to the base of the bullet. I found in testing the small 30-cal case did not like compression at all. The bullet is seated only 0.12″ into the case with zero freebore.

Cases were initially created with the .220 Russian (like a PPC) but I later decided it was better to build from the 6.5 Grendel. I size the brass and bump the shoulder back until it will fit into the chamber, fill to shoulder with International Clays, cotton wad packed on top. I have a fire-forming barrel. (I would not recommend this Clays and cotton wad method in a good barrel.) After initial fire-forming, I then mandrel the neck up the rest of the way to .30 caliber, turn the necks and trim.

It takes at least 8 firings to fully form a case! If you fire only three loads I find the brass does not have a sharp shoulder or any pressure on the bolt so any die selection is incorrect. Brass continues to harden well past 25 firings. I have match brass with well over 500 rounds fired, and I have never blown a case or neck yet (using my forming method).

For loading I use a Hornady Custom Shop Sizing Die and a Ralph Stewart Custom Seating Die. For those who are curious, yes the small group was fired with pre-loaded rounds. I do this now and then with local matches or may load 50 in a batch for one match.”

Mike wanted to thank his smiths, Randy Robinett, and all the folks involved in running the matches: “A big THANKS — as these are the guys that make our matches possible and without question maintain the integrity of the targets and record system. I was very fortunate to have all the right people in the right places for this match and my record. As for measurement – I only saw the target for about 10 seconds up close and can say I’m very happy I did not have to measure that group! Thanks again to everyone!” — Mike Stinnett

kelbly speedy shorty panda action

Similar Posts:

Tags: , , , , , , , ,