Tech Tip: Measuring Shoulder “Bump” with Harrell’s Bump Collar
Harrell’s Precision sells “semi-custom” full-length bushing dies for the PPC and 6BR chamberings. While the Harrell brothers do not cut the die to spec, they carry a large selection of dies made with slightly different internal dimensions. When you send in your fired brass, the Harrells choose a die from inventory with just the right amount of sizing (diameter reduction) at the top and bottom of the case. Given the quality, and precise fit, Harrell’s full-length dies cost $115.00 plus shipping. These are currently available for PPC family, 6mmBR, 6mm Dasher, and 6.5×47 Lapua. The folks at Harrells recommend checking if you have questions about die sizing: “Unless you know exactly which die you need, do not order online. We have 8 different sizes of each caliber. Please call (540)380-2683.”
Bump Measuring Collar
The Harrell brothers provide a nice bonus item with each full-length die — a neat, little shoulder bump measuring device as shown in the photo at right. Hornady sells a stand-alone tool that does the same job, but the Harrell’s bump collar is simpler and faster. To measure your shoulder bump, simply place the Harrell’s bump collar over the front of your deprimed case (before sizing) and measure the OAL with your calipers. Then size the case in your full-length die, replace the collar and repeat the measurement. You want to set your die so the shoulder moves back about .001″ to .0015″ for most applications. (With semi-auto guns you may want more shoulder bump, perhaps .003″.)
Similar Posts:
- Measuring Shoulder "Bump" with Harrell’s Case Collar
- Measure Shoulder Bump Precisely with Harrell’s Bump Collar
- Tech Tip: Measuring Shoulder Bump with Harrell’s Collar
- How to "Bump" Your Cases the Right Amount when Sizing
- Bedeviled by Bump — When Full-Length Dies Don’t Work
Share the post "Tech Tip: Measuring Shoulder “Bump” with Harrell’s Bump Collar"
Tags: Full-length Sizing, Harrell's Die, Harrells Precision, Shoulder Bump
