Eurooptic vortex burris nightforce sale




teslong borescope digital camera barrel monitor


As an Amazon Associate, this site earns a commission from Amazon sales.









March 13th, 2023

TRC39 — Innovative New Gun Transport and Storage Crate

MTM case-gard trc39 tactical rifle case carry box transport box

Wouldn’t it be cool if you could have one large carry case that could hold your rifle, PLUS your ammunition, earmuffs, paper targets, rear bag, bipod, Magnetospeed, spotting scope, and all the other gear you might want to bring to the range? Well MTM Case-Gard has finally created such a do-it-all case, one of the first of its kind ever offered.

MTM’s new TRC39 Tactical Rifle Crate is an all-in-one solution for hunting and shooting gear transport and storage. The TRC39 has a foam-padded 39″ x 11.7″ x 3.1″ gun compartment on the top, and a storage compartment below. Up top, firearms are protected and held in place with MTM’s egg shell foam padding. Beneath the lift-out gun tray is a large compartment equipped with removable partitions. Total storage capacity of the 39″ x 11″ x 7.1″ (deep) lower compartment is 54 quarts. That’s plenty of room for gear and ammo in that lower storage area. And the TRC39 is rated to haul up to 75 pounds of guns and gear.

For security, the TRC39 has four snap latches, padlock tabs, and a water-resistant O-ring seal. To ease transport the TRC39 has two recessed wheels. And there are formed polymer handles on either end of the case. MTM Case-Gard’s TRC39 MSRP is $139.99, but we expect the TRC39 to sell for about $129.00.

We can see this TRC39 case being very popular with tactical shooters and varminters who can carry a rifle, pistol, binoculars, spotting scope, ammunition, and rear bag, all in one large case. We just wish a longer version was also available — the max rifle length that can be stored would be 39″, unless the barreled action is separated from the stock.

MTM case-gard trc39 tactical rifle case carry box transport box

TRC39 Tactical Rifle Crate Features:

Gun compartment holds tactical and short rifles up to 39″ long
Lift-out upper rifle tray, protected with quality foam padding
Two removable dividers in 39″ x 11″ x 7.1″ lower compartment
A full 54 quarts of storage capacity in lower compartment
Two recessed wheels can support up to 75 lbs. of gear
Stackable design with tie-down and strap-over points
Four rugged, no-break snap latches with padlock tabs
No-rust, high-impact, polypropylene construction
Water-resistant O-ring seal (non-submersible)
External Size: 43.5″ x 14.7″ x 11.5″ (Tall)
Engineered and manufactured in America

Permalink Gear Review, New Product, Tactical 1 Comment »
February 25th, 2023

Saturday Movies: Best Brownells Videos — Tools, Tips, and More

Brownells video archive youtube channel scope mounting air travel AR15 reloading .22 LR cleaning

Brownells is a well-known retailer of guns, gun parts, tools, accessories, ammo, and pretty much everything gun-related. What you may not know is that Brownells has a very active video production department that releases new “how-to” and product information videos every week. These videos offer helpful advice on gun cleaning/maintenance, reloading, as well as selecting/assembling components for various kinds of rifles. And every week Brownells serves up a new products video. There now over 1000 videos on the Brownells YouTube Channel, which is truly a remarkable resource.

Here are six of our favorite videos from Brownells. There’s a helpful guide to scope installation, AR owners will find some good advice on spare parts, new reloaders can learn how to use the OAL tool, and all gun owners should watch the video on ammunition storage.

Scope-Mounting — Common Mistakes to Avoid

Always be careful when mounting a rifle scope. This isn’t a super-complex or highly technical task, but there are ways you can mess it up. This video explains common pitfalls to avoid when mounting a scope.

1. Make sure the rings don’t touch ANY part of the turret housing, objective bell, or eyepiece.

2. Be certain the scope rings are tightly clamped to the scope base. Grasp the scope with one hand and the rifle with the other, then ensure there is no play.

3. Make sure there’s clearance between the objective bell and the rifle. No part of the scope should touch the rifle itself.

4. NEVER over-tighten the scope rings. You can actually crush the scope tube and damage the optic beyond repair. Stick to the torque specs!

How to Use Hornady OAL Tool and Hornady Bullet Comparator

Gun Tech Steve Ostrem explains how to properly use Hornady’s Overall Length Gauge to determine length-to-land precisely. The OAL Gauge uses a “Modified Case” that threads onto the tool and holds a bullet. Push on the back of the gauge until you feel the bullet just touch the rifling. (We do this gently at first, tapping the rod a couple time to ensure the bullet is aligned correctly). Once you’ve got the length, then use the tool with a comparator on your calipers to get the length-to-lands. NOTE: We recommend taking the measurement 3-4 times in a row to get a reliable number. With a little practice your should be able to get repeatable measurements within .0015″.

Air Travel with Firearms — Key Regulations You Must Follow

You can travel on commercial airlines with firearms. But you must follow the TSA regulations, and your particular airline’s rules. First, make sure your guns are UNLOADED before your leave home. Guns need to be carried in proper hard-sided cases that cannot be pried open. Be prepared to unlock the case if the TSA wants to inspect what’s inside. TSA agents can cut the locks if they need to open the case but can’t locate you. If you use special TSA-approved locks, TSA agents have master keys that let them open the case without destroying your locks. You CAN transport up to 11 pounds of ammunition — with restrictions explained in the video.

How to Store Ammunition Safely and Securely

This has been one of the most popular Brownells videos — with over 1.7 million views. Here’s the deal — ammunition WILL keep for a long time if you store it properly. DO store ammunition in a cool, dry place that doesn’t have wide temperature swings. Temperature cycling will also degrade primers and powder. Put it in airtight ammo cans to keep out the moisture. Tupperware containers will work too. Brownells also recommends putting moisture-absorbing silica packs in your ammo containers. DON’T just keep ammo in factory cardboard factory boxes stacked in the basement, attic, or garage (especially on the floor). Factory ammo boxes can absorb moisture which can degrade primers and corrode the brass cases. Yes, sealed military ammo will usually handle this kind of storage for quite a while, but it’s still not wise.

Must-Have Spare Parts for AR-Platform Rifles

In this video, two knowledgeable gun techs answer the question: “What spare parts should I keep on hand for my AR-15?” On the list are: Gas Rings, Buffer Spring, Extractor Spring and Pin. NOTE: You may want to try the one-piece spiral gas ring rather than the standard rings which require alignment. The cotter pin and cam pin can also easily get lost when the Bolt Carrier Group is disassembled for cleaning. On the lower receiver you’ll want spare springs and detents for the pivot/takedown pins. If you’re using lighter-power springs, keep standard-power spares on hand. If your rifle stops working, swap in the factory-spec springs to find out if the problem is the gun or your ammo. Also, if you have upgraded your trigger, always keep the original trigger as a backup.

Cleaning Advice for .22 LR Rimfire Rifles

Gun Techs Steve Ostrem and Caleb Savant debunk some myths about cleaning .22 LR barrels. One myth is that cleaning will harm the accuracy of a .22 LR barrel. Caleb thinks this myth is the result of people cleaning a barrel from the muzzle and damaging the muzzle crown, which CAN diminish accuracy. If it’s done right, cleaning won’t damage the bore. However, you certainly do NOT have to clean your 22 LR’s bore every time you go to the range. But DO clean the action every time you shoot the rifle, especially on a semi-auto. What about shooting a lot of lead bullets? Won’t that lead up the bore? The guys give us the straight skinny on lead fouling, too. When you see your .22 LR rifle’s groups opening up, you may want to consider cleaning.
This article is Copyright 2023 AccurateShooter.com. Reproduction on any other website gives rise to monetary damages.

Permalink - Videos, Gear Review, Optics, Tech Tip No Comments »
October 10th, 2020

Guns and Ammo after Storm with Flooding — What to Do

NSSF SAAMI flood flooding submersion water Ammunition Ammo damage
NOAA photo of flooding after Hurricane Floyd in 1999. The Colt Python Revolver once belonged to Elvis Presley (Rock Island Auction).

Firearms owners who have seen their guns and stored ammunition submerged by flood waters in storm-wracked areas are probably wondering if their firearms and ammunition can be salvaged and safely used. To answer these questions, the NSSF and the Sporting Arms and Ammunition Manufacturers’ Institute (SAAMI®) created two documents outlining the proper response to submersion of guns and ammo. If you’ve got wet guns and/or ammo, download these two PDF files and read them carefully.

SAAMI Guidance 1: What to Do About Firearms That Have Been Submerged in Water

SAAMI Guidance 2: What to Do About Ammunition That Has Been Submerged in Water

Dealing with Firearms That Were Submerged

The SAAMI document “Guidance on Firearms That Have Been Submerged or Exposed to Extensive Amounts of Water” points out two major concerns about firearms that have been exposed to water: parts susceptible to moisture and rust damage such as metal parts, wood stocks and grips, and optics; and, secondly, infiltration of the action, barrel and safety systems by grit, silt and other foreign debris.

#1 Always unload firearms before beginning any treatment process.

It’s important to limit moisture and corrosion damage to the component parts of the firearm. This can be accomplished by disassembling the component parts and using up to two coats of a moisture-displacing lubricant such as Hoppes #9 MDL or WD-40 to clean and stabilize the parts while, importantly, following the product’s directions so as not to damage, for instance, plastic or synthetic parts. Another tip is to allow wood stocks and grips to air-dry and not be force dried by exposure to heat.

The document emphasizes that once the firearm has been thoroughly dried, consideration must be given to having the firearm inspected and serviced by the manufacturer, an authorized service center, or a qualified gunsmith before putting the firearm back in service.

Dealing with Ammunition That Was Submerged

NSSF SAAMI flood flooding submersion water Ammunition Ammo damage

Bottom Line, if your ammo has been submerged — DON’T USE IT. SAAMI explains why…

To help firearms owners determine what to do with ammunition that has been affected by water and moisture, SAAMI offers another helpful document, “Guidance on Ammunition That Has Been Submerged in Water.” This document covers differences in moisture resistance between centerfire, rimfire and shotshell ammunition, and potential hazards associated with “drying out” cartridges, including possible deterioration and damage to cartridges due to drying methods.

Another serious hazard that could result from using compromised ammunition is the potential for a bore obstruction due to partial ignition of either the priming compound or the propellant powder charge, or both. Firing a subsequent round through an obstructed barrel can result in bodily injury, death and property damage.

SAAMI provides the following cautionary conclusion: “It would be impossible to ascertain for certain the extent of the deteriorating affect, if any, the water may have had on each individual cartridge. Therefore, the safe answer is that no attempt be made to salvage or use submerged ammunition. The ammunition should be disposed of in a safe and responsible manner. Contact your local law enforcement agency for disposal instructions in your area.”

Permalink - Articles, Bullets, Brass, Ammo, Tech Tip 1 Comment »
August 4th, 2020

Brownells Videos on PRS, Handloading, Ammo Storage and More

Brownells video archive youtube channel AR15 reloading .22 LR cleaning

Brownells is a well-known retailer of guns, gun parts, tools, accessories, ammo, and pretty much everything gun related. What you may not know is that Brownells has a very active video production department that releases new “how-to” and product information videos every week. These videos offer helpful advice on gun cleaning/maintenance, reloading, as well as selecting/assembling components for various kinds of rifles. And every week Brownells serves up a new products video. There now over 1000 videos on the Brownells YouTube Channel, this really is a remarkable resource.

Here are six of our favorite recent videos from Brownells. AR owners will find some good advice on spare parts, new reloaders can learn how to use the OAL tool, and all gun owners should watch the video on ammunition storage.

Introduction to PRS Competition

In this video, Tom Beckstrand, former Special Forces Sniper Team Leader and Guns & Ammo magazine staffer, looks at the Precision Rifle Series (PRS). Tom covers the types of stages in a typical PRS match using unconventional, real-world shooting rests. He also discusses the equipment you’ll need including bag supports, bipods, tripods, and optics. As most ranges aren’t set up for PRS, Tom offers tips on how to train at your local range.

How to Use Hornady OAL Tool and Hornady Bullet Comparator

Gun Tech Steve Ostrem explains how to properly use Hornady’s Overall Length Gauge to determine length-to-land precisely. The OAL Gauge uses a “Modified Case” that theads onto the tool and holds a bullet. Push on the back of the gauge until you feel the bullet just touch the rifling. (We do this gently at first, tapping the rod a couple time to ensure the bullet is aligned correctly). Once you’ve got the length, then use the tool with a comparator on your calipers to get the lenght-to-lands. NOTE: We recommend taking the measurement 3-4 times in a row to get a reliable number. With a little practice your should be able to get repeatable measurements within .0015″.

New Bog Pod Tripod and Caldwell Electronic Muffs

Brownells staffer Paul Levy showcases the impressive new DeathGrip Tripod from Bog Gear. The DeathGrip’s adjustable jaws clamp firmly to the rifle’s forearm. This is a useful device for both PRS shooters and hunters. The head assembly has 25-deg front/rear tilt and 360-deg swivel. And the jaws’ non-slip, rubberized padding won’t scratch that stock. The legs snap open to three pre-set hard stops, and there’s plenty of length extension. Easily switch between rubber feet and steel spikes without removing a single part from the trippod. This video also features Caldwell’s E-Max™ Pro noise-cancelling electronic muffs. These affordable 23 dB NRR units boast dual microphones and digital volume controls, and two sizes are offered — Youth and Adult.

How to Store Ammunition Safely and Securely

Notably, this is the single most popular Brownells video this year, with 494,000 views since March 2020. Here’s the deal — ammunition WILL keep for a long time if you store it properaly. DO store ammunition in a cool, dry place that doesn’t have wide temperature swings. Temperature cycling will also degrade primers and powder. Put it in airtight ammo cans to keep out the moisture. Tupperware containers will work too. Brownells also recommends putting moisture-absorbing silica packs in your ammo containers. DON’T just keep ammo in factory cardboard factory boxes stacked in the basement, attic, or garage — especially not on the floor! The ammunition boxes will absorb moisture which will degrade primers and powder and corrode the brass cases. Yes, sealed military ammo will usually handle this kind of storage for quite a while, but it’s still not wise.

Must-Have Spare Parts for AR-Platform Rifles

This is one of Brownells most popular recent videos, with 154,000 views in just four months. Two gun technicians answer the question: “What spare parts should I keep on hand for my AR-15?” On the list are: Gas Rings, Buffer Spring, Extractor Spring and Pin. NOTE: You may want to try the one-piece spiral gas ring rather than the standard rings which require alignment. The cotter pin and cam pin can also easily get lost when the Bolt Carrier Group is disassembled for cleaning. On the lower receiver you’ll want spare springs and detents for the pivot/takedown pins. If you’re using lighter-power springs, keep standard-power spares on hand. If your rifle stops working, swap in the factory-spec springs to find out if the problem is the gun or your ammo. Also, if you have upgraded your trigger, always keep the original trigger as a backup.

Cleaning Advice for .22 LR Rimfire Rifles

Gun Techs Steve Ostrem and Caleb Savant debunk some myths about cleaning .22 LR barrels. One myth is that cleaning will harm the accuracy of a .22 LR barrel. Caleb thinks this myth is the result of people cleaning a barrel from the muzzle and damaging the muzzle crown, which CAN diminish accuracy. If it’s done right, cleaning won’t damage the bore. However, you certainly do NOT have to clean your 22 LR’s bore every time you go to the range. But DO clean the action every time you shoot the rifle, especially on a semi-auto. What about shooting a lot of lead bullets? Won’t that lead up the bore? The guys give us the straight skinny on lead fouling, too. When you see your .22 LR rifle’s groups opening up, you may want to consider cleaning.

Permalink - Articles, Bullets, Brass, Ammo, Gear Review, Gunsmithing, Reloading, Tech Tip No Comments »
June 11th, 2018

BargainFinder 142: AccurateShooter’s Deals of the Week

Accurateshooter Bargain Finder Deals of Week

At the request of our readers, we provide select “Deals of the Week”. Every Monday morning we offer our Best Bargain selections. Here are some of the best deals on firearms, hardware, reloading components, optics, and shooting accessories. Be aware that sale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.

1. Natchez — Bushnell 6-18x50mm Trophy, $79.99 after Rebate

Bushnell bargain trophy 6-18x50mm riflescope optic scope

Looking for a decent medium-power zoom optic for a varmint rifle or rimfire rig? Here’s a great deal on a name-brand scope with side-focus parallax and good warranty. This 6-18x50mm Bushnell Trophy certainly won’t compete with an elite scope, but at $129.99 it’s hard to go wrong. A verified buyer reports: “Likely a best buy/solid value purchase. Glass is good, probably best in this price range. Used for targets — [it was] clear, and focuses down to about 10 yards.” The reticle is Bushnell’s Multi-X — the lines are fairly thick, but it will work for general varmint and target duties. NOTE: This Trophy Scope also qualifies for a Bushnell $50 Trophy Bucks Rebate (good through June 30, 2018). That $50 Rebate lowers your net cost to just $79.99!

2. CDNN — Colt Competition AR15 Kit, $599.99

Colt AR AR15 match rifle upper lower kit discount CDNN
The Colt Kit does NOT include barrel, bolt carrier group, charging handle, or magazine.

This affordable Colt AR15 Kit includes upper, complete lower, handguard, and Magpul stock. To this, add your choice of barrel and optic. We like this option because the barrel is so important to accuracy and overall performance. This Colt package costs $599.99. Add a match-grade, finish-chambered barrel from Criterion or Krieger, plus bolt carrier group, and you’re in business. The Magpul PRS stock features a quick-adjustable cheek-piece and butt-plate — allowing you to easily adapt head position and LOP for your discipline of the day. The straight-toe PRS stock works great in a rear bag. This is a good platform for a PRS Gas Gun Division rifle.

3. Amazon — RCBS ChargeMaster Lite, $186.99

RCBS Chargemaster lite powder scale dispenser sale Amazon

Need a good, modern electronic scale/dispenser? The modern ChargeMaster Lite offers good performance for the price — now $186.99 at Amazon and $187.49 Brownells. But at Brownells, with Code NCS you can get $15 off and free shipping — lowering your net cost to $172.49! That’s a killer deal — other retailers are charging up to $260.00 for this machine. Once calibrated, we found the ChargeMaster Lite’s dispensing to be very accurate. RCBS claims +/-0.1 grain. This newer machine is a bit easier to program than the original ChargeMaster. Verified purchasers have been happy, but with one complaint: “You cannot turn off the beeping. The [original ChargeMaster] has a way to mute the beeping. This one does not.” Take note.

4. LabRadar Chronograph — $50 Off, Sale Ends June 24

LabRadar Radar Doppler chronograph summer sale $50 off chrono lab-radar Bruno shooters Creedmoor

If you’ve been wanting to get a LabRadar Chronograph, now’s a good time. You can now save $50 on this very advanced piece of technology — probably the most sophisticated chronograph system ever offered to the general public. That’s notable because you almost never see this discounted below the $559.95 MAP price. You can save $50.00 on this unit now through June 24, 2018. This is a factory-authorized, once-a-year Summer Sale. The sale extends through 6/24/2018. You can get the LabRadar from top vendors including Creedmoor Sports, Bruno Shooters Supply, and Midsouth Shooters Supply.

5. CDNN — 6mm Creedmoor Ruger Precision Rifle, $899.99

Ruger Precision Rifle 6.5 Creedmoor PRS production class

Get a Ruger Precision Rifle in 6mm Creedmoor for $899.99 complete. That price, which includes rings, is great for a Gen 2 model. If you’ve been thinking of purchasing a Ruger Precision Rifle (RPR) chambered for the 6mm Creedmoor cartridge, this is a killer deal. Right now CDNN Sports is offering this popular tactical rig for under $900.00, in the 6mm Creedmoor chambering. This shoots faster and flatter than the 6.5 Creedmoor — so many PRS guys have switched to it. This is a good choice for the PRS production class, or you can take in to another level of performance with a Pre-Fit 26″ cut-rifled barrel from Krieger. This is the lastest RPR Gen 2 version with the upgraded handguards. Heck of a bargain boys — you can pay $1200 or more elsewhere for the same rifle.

6. EuroOptics — Leica CRF 2000, $399.00

Leica 2000-B Rangemaster Laser LRF Rangefinder Sale Eurooptics.com

This may be the best deal we’ve seen on the vaunted Leica 2000-B Laser Rangefinder (LRF) with 7-power optic. This unit is rated out to 2000 yards on reflective objects (in real-world use it will laze a deer well past 800 if you can hold steady). The Leica 2000-B features air pressure and temperature sensors, plus on-board inclinometer. Angle correction works out to 1200 horizontal yards equivalent, with the true hold-over displayed in both MILs and MOA. The compact Leica CRF 2000-B weighs just 6.5 ounces and measures 4.5″ L x 2.25″ H x 1.25″ W. It has a waterproof outer shell.

7. Champions Choice — Deluxe 58″-Long Rifle Case, $68.00

Champion's Choice extra long palma rifle case 58

Many of our readers shoot Palma, F-Class, and ELR rifles with long barrels (up to 35″). It’s difficult to find high-quality, well-padded cases that fit very long rifles. Champion’s Choice offers just such a product, the 58″ Deluxe Soft Rifle Case. With thick 1″ padding on each side, big pockets, and backpack straps, this black/blue/white gun case has earned rave reviews from our Forum members. There’s plenty of room for big scopes, and it even comes with an internal tube to hold your cleaning rod.

8. Amazon — MTM AC4C Ammo Crate with 4 Ammo Boxes, $24.99

MTM Ammo Carrier Crate Box

Here’s a very cool product from MTM at a great price. The versatile MTM AC4C Ammo Carrier features four, lockable polymer ammo cans in a fitted, four-slot 23.5” x 11.3” x 7.5” carry crate. This makes it easy to haul four full ammo cans. Actual purchasers have raved: “Moments after I received this storage box set I ordered another. Very well built and great design. Awesome and a steal at the price.” Right now this is on sale at Amazon for just $24.99 with free prime shipping. The system includes four lockable, O-Ring 11.3″ x 7.2″ x 5″ ammo cans (AC30T) for multi-caliber ammo storage. The crate even includes tie-down points for transport in a cart or ATV. NOTE: Earlier this summer this MTM AC4C system sold for $39.99. The current $29.99 price represents a 25% savings!

9. Amazon — Howard Leight MAX NRR33 Earplugs, $8.22/50 Pairs

accurateshooter.com review Max-1 Howard Leight ear plugs

20 Pairs
50 Pairs

These Howard Leight NRR33 Max plugs are your Editor’s favorite foam earplugs. Between shooting, motorcycling and mowing lawns, I probably have Max plugs in my ears 2-3 days a week. This is a very good price for a bulk pack of 50 pairs. And if you act soon, you can get free shipping to boot.

Permalink Bullets, Brass, Ammo, Hot Deals, Reloading No Comments »
July 23rd, 2013

Store Ammo (and More) Underground in MTM Survivor Container

Survivor underground ammo container can MTMIn-Ground Storage
With the price of ammo at all-time highs, folks are looking for ways they can stash ammo reserves securely, without using up precious space in their gunsafes. Additionally, there are important reasons why a locked, steel-walled gunsafe is not recommended for long-term ammo storage (see local fire regulations on the subject of ammo storage). MTM CaseGard now offers a heavy-duty, drum-style PVC container for underground storage of ammunition or other important items.

MTM’s Survivor Ammo Container features a rugged, bucket-style body with a double-O-Ring sealed lid and protective outer cap. The inner lid is held down with multiple screws to provide a secure seal. Then the larger “mushroom head” top fits in place over the whole assembly. Each container includes a heavy-duty Vapor Corrosion Inhibitor (VCI) plastic bag plus a moisture-absorbing desiccant pack. The 13.5″ x 10″ drum costs $22.10 at Midsouth Shooter’s Supply. That’s less than the cost of a box of bullets these days. Internal capacity is equivalent to a .50-Cal metal ammo can. The MTM Survivor will hold up to 600 rounds of .45 ACP or 223 ammo. It can also hold about 15-20 AR-15 magazines.

Survivor underground ammo container can MTM

Outside Dimensions: 13.5″ (H) x 10″ (D) | Inside Dimensions: 12.4″ (D) x 7″ (H)

This is a convenient way to hide ammunition, bullets, copies of important documents, emergency money, coins and other small items. Just make sure of two things. First, remember exactly where you buried your Survivor container. You may want to include a small notation on a site plot that you place in a safe-deposit box or give to trusted family members. Second, don’t just dig a hole, drop the unit in the ground and shovel some fresh dirt over the top. Restore a “natural look” to the vegetation or ground cover over the hole. Otherwise your prominent round dirt pile may attract unwanted attention.

Permalink Bullets, Brass, Ammo, New Product 2 Comments »