January 26th, 2021

Hornady Iron Press with Innovative Shuttle Priming System

Hornady Iron Press Lock-N-Lock LNL 2016 single stage press rockchucker

Right now reloading presses are in high demand. If you are shopping for a single-stage press, here’s a good press you may still find available at many vendors. The Hornady Iron Press™ features a super-strong, pyramid-style cast-iron frame with an open front. A clever optional “automatic” priming system shuttles primers from a vertical tube in the back to the shell-holder in the front. This is very clever engineering. You really should watch the video — it shows the patented auto-priming system in action. The Auto-Prime system is sold separately or as part of the Iron Press Reloading Kit.

Watch this Video to See Gravity-Fed Shuttle Priming System (00:45, 01:00):

Hornady Iron Press Lock-N-Lock LNL 2016 single stage press rockchucker

Optional Automatic Priming System
The optional auto-priming system is a real selling point for this new press we think. When you move the press handle rearwards, a horizontal bar toggles back to pick up a primer from the column in the rear of the press. Then this same bar move forwards to place the fresh primer in the center of the shell-holder. Hornady explains: “The available gravity-fed Automatic Priming System (sold separately or with the Lock-N-Load® Iron Press™ Reloading Kit), combined with the Accessory Mounting Deck, increases reloading efficiency by allowing more processes to occur simultaneously. The Iron Press™ is the first of its kind to allow the ability to deprime, pause, and remove the case to chamfer & deburr … then replace and prime.” Do watch the video to see the priming system in action.

Hornady Iron Press Lock-N-Lock LNL 2016 single stage press rockchucker

The broad top of the beefy (26-lb.) Iron Press can hold case prep tools (such as chamfer tool and case-neck brush) and/or a box for bullets or brass. NOTE: This is NOT a turret press — you can only use one die at a time. However, Hornady offers an accessory “Die Caddy” (sold separately) that can hold up to three (3) more dies. That way you can quickly switch from a sizing die to a seater die (or vice-versa). What Hornady calls the “Accessory Mounting Deck” gives quick access to items such as trays for bullets or cases, chamfer and deburr tools, case neck brushes, primer pocket cleaners and other accessories. The Iron Press comes with the Lock-N-Load® bushing system which allows for rapid die changes.

Permalink - Videos, Bullets, Brass, Ammo, Gear Review, Reloading No Comments »
August 13th, 2016

Ultimate Reloader Reviews the Lee Auto Bench Prime

Lee Auto Bench Prime Primer tool Ultimate Reloader

Gavin Gear of UltimateReloader.com recently reviewed Lee Precision’s new lever-operated, bench-mounted priming tool. The Lee Auto Bench Prime features a hopper-style primer feeder set at an angle. Gavin likes the tool, reporting that primers feed well and seat fully with very little effort. And switching from large to small primer size (or vice-versa) is quick and easy. Overall, Gavin says the Lee Auto Bench Prime has earned a place in his reloading room: “This is now my tool of choice for off-press priming. The Lee Auto Bench Prime is easier to use than a hand priming tool, and more efficient.”

Watch UltimateReloader.com’s Lee Auto Bench Prime Gear Review


READ Full Review on Ultimate Reloader.com

Gavin tells us that the system worked well: “All in all, I’m really liking the LEE Auto Bench Prime. In the video, I prime both small primer .223 Rem brass and large primer .308 Win cases. I was impressed with how easy it was to seat the primers, and how quickly the process goes.”

How the Lee Auto Bench Prime Performs
Gavin had three important “take-aways” from his initial loading sessions with the Lee Auto Bench Prime:

1. I was surprised by the low effort needed to prime cases — it’s pretty amazing.
2. You can quickly and easily install shellholders and change primer sizes.
3. The folding primer tray works very well. It’s a great setup from my testing so far.

Are there any negatives with the tool? Gavin noted that, in the course of loading 100+ rounds, once or twice he had to tap the triangular tray to get the primer to feed: “That’s not a big deal, and may smooth out with time”.

Lee Auto Bench Prime Primer tool Ultimate Reloader

Tool Costs Under $30.00
Available at Grafs.com for just $28.59, the Lee Auto Bench Prime tool is very affordable. It costs much less than competitive bench-mounted priming tools from Forster and RCBS.

NOTE: this tool requires dedicated Auto Prime shell holders (sold separately), but that’s a relatively small added expense. A set of Lee shell-holders (shown at right) costs less than $20.00 (street price).

Lee Shell-holders
Permalink - Videos, Gear Review, Reloading 4 Comments »