February 22nd, 2020

.224 Valkyrie Barrel Cut-Down Velocity Test — 4 Ammo Types

224 .224 Valkyrie barrel cut-down test velocity 90gr Sierra MatchKing Fusion SP TMK

224 .224 Valkyrie barrel cut-down test velocity 90gr Sierra MatchKing Fusion SP TMKVelocity vs. barrel length — How much speed will I sacrifice with a shorter barrel? Hunters and competition shooters often ask that. Today we DO have solid answers to that question for many cartridge types thanks to Rifleshooter.com.

Rifleshooter.com has conducted a series of barrel cut-down tests for many popular chamberings: .223 Rem, 6mm Creedmoor, .243 Win, 6.5 Creedmoor, .308 Win, .300 Win Mag, .338 Lapua Magnum and more. And recently Rifleshooter.com added the new .224 Valkyrie cartridge to the list, cutting a 28″ Shilen barrel down to 16.5″ in one-inch increments. Rifleshooter.com measured the .224 Valkyrie’s velocities at each barrel length with four different types of factory ammo.

For its .224 Valkyrie test, RifleShooter.com sourced a Shilen Match Barrel and fitted it to a Rem 700 short action employing a one-piece PT&G bolt with the required .440″ (SPC-sized) bolt-face. The barreled action rides in a MDT LSS-XL Gen 2 Chassis.

READ .224 Valkyrie Barrel Cut-Down Test on Rifleshooter.com »

Bill, Rifleshooter.com’s Editor, explained his test procedure:

“I gathered four different types of factory Federal 224 Valkyrie ammunition, the 90gr Sierra MatchKing (SMK), 90gr Fusion soft point (SP) (referred to a Fusion MSR), 75gr Total Metal Jacket (TMJ) and 60gr Nosler Ballistic Tip Varmint (NBT). After a brief barrel break in and zero, I fired 5 rounds of each cartridge at each barrel length (except the 75 TMJ, I fired 4 rounds at each barrel length due to limited resources). I recorded the average muzzle velocity and standard deviation for each ammunition and barrel length combination and cut the barrel back 1 inch and repeated the process. I recorded barrel lengths from 28″ to 16.5″ (I try to save these barrels as finished 16″ tubes so they don’t go to waste).”

224 .224 Valkyrie barrel cut-down test velocity 90gr Sierra MatchKing Fusion SP TMK

The Heavy Bullet 90gr Ammo Lost about 21 FPS per Inch
How did the test turn out? You’ll find all the results summarized in helpful tables with inch-by-inch velocity and SD numbers. For the two, 90gr ammo samples, results were similar. The 90gr SMK ammo started at 2782 fps (28″), finishing at 2541 fps (16.5″). That’s a loss of 241 fps, or 20.96 fps average per inch of length. The ammo loaded with 90gr Fusion SPs started at 2797 fps (28″) and ended at 2561 fps (16.5″), a drop of 236 fps. That’s 20.5 fps loss per inch. NOTE: Ambient temperature during the test was 45° F. You could expect the overall velocities to be a bit higher during hotter summer months.

See 90gr SMK Velocity/Length Test Chart | See 90gr Fusion SP Velocity/Length Test Chart

.224 Valkyrie Velocity Cut-Down Test

With a the smaller bullets, the effect was even more dramatic. As you’d expect they started out faster. The ammo with 60gr Nosler Ballistic Tips (NBT), a good choice for varminters, started at 3395 fps (28″), and declined to 3065 fps (16.5), a total velocity drop of 330 fps. Average velocity loss was 28.7 fps per inch of barrel length. Rifleshooter.com also tested Federal 75gr TMJ ammo.

About the .224 Valkyrie Cartridge

224 .224 Valkyrie barrel cut-down test velocity 90gr Sierra MatchKing Fusion SP TMK

The new .224 Valkyrie was introduced late last year as a Hot Rod cartridge that will work in AR15s. Designed to rival the .22 Nosler while still running well in ARs, the new .224 Valkyrie offers excellent long-range performance when loaded with modern, high-BC bullets. We expect some bolt-action PRS shooters might adopt the .224 Valkyrie. Why? Reduced recoil. With the 90gr SMK, the .224 Valkyrie offers ballistics similar to the 6.5 Creedmoor but with significantly less felt recoil. Check out this chart from Federal showing comparative recoil levels:

.224 Valkyrie Federal Rifleshooter.com cut-down barrel

.224 Valkyrie vs. .22-250 Remington
The Social Regressive explains: “There are two key reasons why the .224 Valkyrie is unique and desirable. First, it is specifically designed to fit the limitations of the AR-15 platform. It does so even when loaded with gigantic bullets, like the 90-grain SMK that Federal announced. The .22-250 Rem is too long and too fat to work in the AR-15 platform; it needs an AR-10 bolt and magazine.”

Image from Social Regressive .224 Valkyrie Youtube Video.

The new .224 Valkyrie is basically a 6.8 SPC case necked down to .22-caliber. You can use your existing AR15 lower, but you will need a dedicated .224-Valkyrie upper, or at the minimum a new barrel, modified bolt with proper bolt face, and 6.8-compliant mags.