Do you occasionally get completely unexplained flyers, or have a shot land straight down at 6 O’Clock, right below your point of aim? That could be caused by poor or inconsistent trigger technique. How you pull the trigger can and does affect your accuracy.
Many gun enthusiasts start with pistols. When they later start shooting rifles they may carry over some not-so-good practices acquired from shooting handguns with heavy 4 to 6-pound trigger pulls. You may want to “re-learn” your trigger techniques to get better rifle results.
Shooting Sports USA has a good article on trigger technique that offers many useful tips. That article also has many helpful illustrations, including the one shown above. Another illustration shows different types of trigger shoes (straight vs. curved) and explains how each makes a difference: “With a lightly curved trigger, the shooter’s finger can contact the trigger either high or low according to preference. Higher contact will increase the resistance.” READ ARTICLE HERE.
The article analyzes common errors, such as pulling the trigger with the very tip of the finger rather than the pad of the index finger: “Using the tip of the finger can lead to lateral pressure on the trigger, which throws off the shot.”
The article also explains that you should check your trigger regularly to make sure it is functioning properly and is not out of adjustment: “Just like any other moving part, the trigger can suffer from wear. In such a precise mechanism, tiny amounts of wear can cause major problems.”
The ergonomics of the Eliseo Tubegun allow a nice, straight trigger pull.
Trigger Tips
Six Suggestions for Making your Trigger Control More Consistent.
1. If your triggers are adjustable, set the pull weight appropriate to the discipline. For a hunting rifle, you don’t want an ultra-light trigger pull. For High Power, you may want a two-stage pull, while on a Benchrest rifle you may prefer a very light trigger.
2. If you have a two-stage trigger, experiment with different combinations of First Stage and Second Stage.
3. Have a friend watch you as you pull the trigger, and maybe even take a close-up video as you pull the trigger. This can reveal a variety of flaws.
4. Practice dry-firing to see if flaws in trigger technique are causing gun movement.
5. As an experiment, try pulling the trigger with your middle finger. Ergonomically, the middle finger has a more straight alignment with the tendons in your hand. This exercise can help you identify alignment issues with your index finger.
6. For stocks with adjustable Length of Pull you may want to set the LOP differently for bench shooting vs. prone or F-Class shooting.
When Only the Best Will Do…
German-made Bix’N Andy triggers, available from BulletCentral.com, are among the very best you can buy. Available in both single-stage and two-stage, Bix’N Andy triggers are extremely precise, repeatable and smooth. The unique internal, friction-reducing roller ball system allows for extremely low reset force, yielding an ultra-crisp let-off. Bix’N Andy triggers can be fitted with a variety of trigger shoes according to shooter preference.
Share the post "Improve Trigger Technique for Better Accuracy & Higher Scores"
Do you occasionally get completely unexplained flyers, or have a shot land straight down at 6 O’Clock, right below your point of aim? That could be caused by poor or inconsistent trigger technique. How you pull the trigger can and does affect your accuracy.
Many gun enthusiasts start with pistols. When they later start shooting rifles they may carry over some not-so-good practices acquired from shooting handguns with heavy 4 to 6-pound trigger pulls. You may want to “re-learn” your trigger techniques to get better rifle results.
Shooting Sports USA has a good article on trigger technique that offers many useful tips. That article also has many helpful illustrations, including the one shown above. Another illustration shows different types of trigger shoes (straight vs. curved) and explains how each makes a difference: “With a lightly curved trigger, the shooter’s finger can contact the trigger either high or low according to preference. Higher contact will increase the resistance.” READ ARTICLE HERE.
The article analyzes common errors, such as pulling the trigger with the very tip of the finger rather than the pad of the index finger: “Using the tip of the finger can lead to lateral pressure on the trigger, which throws off the shot.”
The article also explains that you should check your trigger regularly to make sure it is functioning properly and is not out of adjustment: “Just like any other moving part, the trigger can suffer from wear. In such a precise mechanism, tiny amounts of wear can cause major problems.”
The ergonomics of the Eliseo Tubegun allow a nice, straight trigger pull.
Trigger Tips
Six Suggestions for Making your Trigger Control More Consistent.
1. If your triggers are adjustable, set the pull weight appropriate to the discipline. For a hunting rifle, you don’t want an ultra-light trigger pull. For High Power, you may want a two-stage pull, while on a Benchrest rifle you may prefer a very light trigger.
2. If you have a two-stage trigger, experiment with different combinations of First Stage and Second Stage.
3. Have a friend watch you as you pull the trigger, and maybe even take a close-up video as you pull the trigger. This can reveal a variety of flaws.
4. Practice dry-firing to see if flaws in trigger technique are causing gun movement.
5. As an experiment, try pulling the trigger with your middle finger. Ergonomically, the middle finger has a more straight alignment with the tendons in your hand. This exercise can help you identify alignment issues with your index finger.
6. For stocks with adjustable Length of Pull you may want to set the LOP differently for bench shooting vs. prone or F-Class shooting.
When Only the Best Will Do…
German-made Bix’N Andy triggers, available from BulletCentral.com, are among the very best you can buy. Available in both single-stage and two-stage, Bix’N Andy triggers are extremely precise, repeatable and smooth. The unique internal, friction-reducing roller ball system allows for extremely low reset force, yielding an ultra-crisp let-off. Bix’N Andy triggers can be fitted with a variety of trigger shoes according to shooter preference.
Share the post "Trigger Technique — Become a Better Trigger-Puller"
Do you occasionally get completely unexplained flyers, or have a shot land straight down at 6 O’Clock, right below your point of aim? That could be caused by poor or inconsistent trigger technique. How you pull the trigger can and does affect your accuracy.
Many gun enthusiasts start with pistols. When they later start shooting rifles they may carry over some not-so-good practices acquired from shooting handguns with heavy 4 to 6-pound trigger pulls. You may want to “re-learn” your trigger techniques to get better rifle results.
Shooting Sports USA has a good article on trigger technique that offers many useful tips. That article also has many helpful illustrations, including the one shown above. Another illustration shows different types of trigger shoes (straight vs. curved) and explains how each makes a difference: “With a lightly curved trigger, the shooter’s finger can contact the trigger either high or low according to preference. Higher contact will increase the resistance.” READ ARTICLE HERE.
The article analyzes common errors, such as pulling the trigger with the very tip of the finger rather than the pad of the index finger: “Using the tip of the finger can lead to lateral pressure on the trigger, which throws off the shot.”
The article also explains that you should check your trigger regularly to make sure it is functioning properly and is not out of adjustment: “Just like any other moving part, the trigger can suffer from wear. In such a precise mechanism, tiny amounts of wear can cause major problems.”
The ergonomics of the Eliseo Tubegun allow a nice, straight trigger pull.
Trigger Tips
Six Suggestions for Making your Trigger Control More Consistent.
1. If your triggers are adjustable, set the pull weight appropriate to the discipline. For a hunting rifle, you don’t want an ultra-light trigger pull. For High Power, you may want a two-stage pull, while on a Benchrest rifle you may prefer a very light trigger.
2. If you have a two-stage trigger, experiment with different combinations of First Stage and Second Stage.
3. Have a friend watch you as you pull the trigger, and maybe even take a close-up video as you pull the trigger. This can reveal a variety of flaws.
4. Practice dry-firing to see if flaws in trigger technique are causing gun movement.
5. As an experiment, try pulling the trigger with your middle finger. Ergonomically, the middle finger has a more straight alignment with the tendons in your hand. This exercise can help you identify alignment issues with your index finger.
6. For stocks with adjustable Length of Pull you may want to set the LOP differently for bench shooting vs. prone or F-Class shooting.
When Only the Best Will Do…
German-made Bix’N Andy triggers, available from BulletCentral.com, are among the very best you can buy. Available in both single-stage and two-stage, Bix’N Andy triggers are extremely precise, repeatable and smooth. The unique internal, friction-reducing roller ball system allows for extremely low reset force, yielding an ultra-crisp let-off. Bix’N Andy triggers can be fitted with a variety of trigger shoes according to shooter preference.
Share the post "Improve Your Trigger Technique for Better Scores and Accuracy"
At the request of our readers, we provide select “Deals of the Week”. Every Monday morning we offer our Best Bargain selections. Here are some of the best deals on firearms, hardware, reloading components, optics, and shooting accessories. Be aware that sale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.
If you enjoy hunting small varmints (such as ground squirrels), or plinking out to 200 yards, you really should get a 17 HMR. This little rimfire cartridge is very effective on small varmints and is much flatter shooting than a .22 LR. What 17 HMR to buy? Well if you’re on a tight budget, consider the Rossi RB17. This handy bolt gun boasts a nicely designed stock, a 5-round magazine, 21″ barrel, plus scope bases attached to the action. And you can get one for under $140! Right now the RB17 is just $135.99 at Gensec Armament and $136.48 at Guns Midwest. (Compare More Vendors).
2. Krieger Barrels — Discounted Overstock Barrels
Krieger barrels have a strong tradition of being at the top of leaderboards year after year. But like any good barrel company they often need to be ordered months ahead of time. A little-known secret is that Krieger maintains a supply of Krieger overstock barrels that are priced to move and available right now. These are absolutely first-run quality, but just represent excess volume in particular contours and calibers. We’ve ordered Krieger overstock barrels and have never been disappointed — especially when the barrel shows up a week later.
3. Grizzly Industrial — Bald Eagle Slingshot Rest, $129.97
Maybe you’re just getting into F-Class or just need a good stable front rest to shoot from and don’t want to spend a ton of money on one. Don’t worry because Grizzly now has the Bald Eagle BE1129 aluminum slingshot rest for an amazingly low $129.97 Closeout price. Just add your favorite front bag and you’re ready to go with a competition quality elevation adjustable rest. They also have the Bald Eagle BE1209 – Big Fifty Rest on sale now for $205.00, nearly 50% off. With a much wider span and cast-iron legs, the Big Fifty is designed for larger guns up to .50 caliber. Either way, these rests are a great value.
4. Bullet Central — Buy BAT Action + Bix’N Andy Trigger, Save $50
BAT actions are certainly some of the finest actions on the market. Likewise, Bix’n Andy triggers are some of the very best triggers. However, it’s rare to see either of them on sale. For a limited time, Bullet Central is offering a $50 DISCOUNT with the purchase of a Bat action plus a Bix’n Andy trigger. This is about as good a deal as you’ll find on either product. If a new gun build is in your future this is a good time to pick up a premium action and trigger and save some bucks in the process.
5. Amazon — Caldwell Stable Table Lite, $109.99
Here’s a great product for varmint hunters, and shooters who test their rifles in locations without fixed benches. Yes there are other portable benches, but these may weigh over 120 pounds and cost hundreds of dollars. The Caldwell Caldwell Stable Table Lite is a affordable, transportable option. The stable table weighs under 30 pounds and costs about $110.00. That makes it very viable as a movable varmint bench. This weatherproof folding table folds flat and is only about 8″ thick when packed up.
Photos don’t do this product justice, guys. You should really watch the video to see how the Stable Table Lite works. The video shows how the table deploys easily and how you can swing the seat to either side. Any shooter looking for a light-weight, affordable, easily-transported shooting table should definitely consider this product.
6. Taurus G2c 9mm — $184.99 with Factory Rebate
This is a good little gun at a great price. Taurus is running a factory rebate through the end of May 2019. Palmetto State Armory has the OD Green-frame Taurus G2c 9mm for just $209.99 with FREE shipping. But the Taurus $25 Factory Rebate lowers your price to just $184.99 for this G2c. Or, if you like basic black, you can get a black-framed G2c for $174.99 after rebate. Despite its small size, the G2c has a 12-round magazine. We like the fact it has a left-side manual safety (unlike the Glock).
Are you checking your headspace to ensure you’re pushing your shoulders back the correct amount? If you’re aren’t using a tool like the Hornady Headspace Gauge with 5 bushings then you are just guessing and you’ll never know for sure. Using one of the headspace gauges is one of the best ways to control your full-length sizing and thereby improve the consistency of your handloads.
Right now CostCo is offering the Cannon CS72 Executive Series 72-Gun Safe for just $749.99 DELIVERED! That’s a great price for a HUGE safe with 43.8 cubic feet of internal space. This 649-pound behemoth measures 59″H x 45″W x 28″D and weight 696 pounds (over 1/3 of a ton!). This is built strong with 1″ thick composite door, six 1″-diameter locking bolts, and 60-minute fire rating. NOTE: The $749.99 price includes “Standard shipping via common carrier” to the lower 48 states. This is a great value. You could easily pay $1600 or more for a safe this size from a local vendor.
9. Amazon — Caldwell Front and Rear Bag Set (Unfilled), $20.16
This is a functional, “field expedient” system that’s easy to haul around and only costs $20.16. Varminters can keep these bags in a vehicle for deployment any time. Act quick — this is a special sale price at Amazon.com. This unfilled bag combo sells for up to $33.00 elsewhere. This inexpensive system works surprisingly well, particularly with “standard” rifles with narrow fore-ends. Rather than sand, you can fill with rice or media to make the bags lighter. This system features a heavy-duty clip and D-Ring for linking the two bags for easy carry. Caldwell DeadShot bags are crafted from durable, water-resistant 600 denier polyester. Bag dimensions (filled) are: FRONT 11″ x 8.5″ X 6″; REAR 5″ x 5″ x 4.5″.
Share the post "Bargain Finder 189: AccurateShooter’s Deals of the Week"
