|
|
November 19th, 2023
Whether you should from the bench, or from prone, it’s great to have your cartridges in a convenient, easy-to-reach position. This article explains how you can build your own height-adjustable ammo caddy for under ten bucks. Credit Martin Tardif for this great Do-It-Yourself (DIY) project. Martin’s flex-arm caddy design works great for F-Open competitors as well as anyone who shoots with a pedestal front rest, either on the ground or from a bench. The ammo caddy attaches, via a flexible arm, to your front rest. The flexy arm allows you to position your ammunition close to your rifle’s feeding port. That makes it easy to grab cartridges and load them into the chamber without shifting your shooting position.
Kudos to Martin Tardif for his clever use of inexpensive materials. The total cost of the whole project, according to Martin, was just $8.00! (With Bidenflation, materials could run a bit more these days, but the project would still be very inexpensive.)
Martin Explains How to Build the Ammo Caddy
Here are some pics of my DIY P.L.A.B. (Port Level Ammo Block). I cannibalized the goose neck from a Craftsman bendy-style utility light and bought a 3.5″x 1″ Acetal disk on eBay. I then drilled out the disk to accept twenty .284 Winchester rounds and screwed the disk to the bendy arm. The arm, by itself, wasn’t sturdy enough to support my fully loaded ammo block, so I inserted a 1/8″-diameter steel rod cut to length into the arm before I screwed it to the disk. On this Bald Eagle rest, I wasn’t using the windage adjustment cable. That allowed me to secure the bottom end of the arm to the unused 5/16″ x 18 bolt hole for the cable. [Editor’s Note: For other pedestal rest types/brands you may need to drill a hole for the base of the flexy arm.]
Share the post "Do-It-Yourself Ammo Caddy — Under Ten Bucks"
November 15th, 2020
Whether you should from the bench, or from prone, it’s great to have your cartridges in a convenient, easy-to-reach position. This article explains how you can build your own height-adjustable ammo caddy for under ten bucks. Credit Martin Tardif for this great Do-It-Yourself (DIY) project. Martin’s flex-arm caddy design works great for F-Open competitors as well as anyone who shoots with a pedestal front rest, either on the ground or from a bench. The ammo caddy attaches, via a flexible arm, to your front rest. The flexy arm allows you to position your ammunition close to your rifle’s feeding port. That makes it easy to grab cartridges and load them into the chamber without shifting your shooting position.
Kudos to Martin Tardif for his clever use of inexpensive materials. The total cost of the whole project, according to Martin, was just $8.00!
Martin Explains How to Build the Ammo Caddy
Here are some pics of my DIY P.L.A.B. (Port Level Ammo Block). I cannibalized the goose neck from a Craftsman bendy-style utility light and bought a 3.5″x 1″ Acetal disk on eBay. I then drilled out the disk to accept twenty .284 Winchester rounds and screwed the disk to the bendy arm. The arm, by itself, wasn’t sturdy enough to support my fully loaded ammo block, so I inserted a 1/8″-diameter steel rod cut to length into the arm before I screwed it to the disk. On this Bald Eagle rest, I wasn’t using the windage adjustment cable. That allowed me to secure the bottom end of the arm to the unused 5/16″ x 18 bolt hole for the cable. [Editor’s Note: For other pedestal rest types/brands you may need to drill a hole for the base of the flexy arm.]
Share the post "Make Your Own Ammo Caddy for Under Ten Bucks"
September 30th, 2016
Forum member Alex M. (aka Nando-AS) has crafted some very nice wood Cartridge Caddies fitted with timers. He’s made these for competitors at the F-Class Nationals in Lodi, Wisconsin, and he’s now taking orders for other shooters who might want one. The caddies are made from Oak, hold 25 rounds, and feature a battery-powered shot timer. Price is $75.00 shipped for the 6mm and .308 caddies and $85.00 shipped for the Magnum size. Forum members can contact Alex via our Forum Classifieds Board, or you can email alextek [at] charter.net.
Alex tells us: “Several forum members and shooting buddies suggested that I should make more Cartridge Caddies with Timers, so I made over a dozen to take to Lodi and to offer to Forum members.”
These Caddies are made of solid red Oak and are finished with five coats of clear Polyurethane. Each has 25 holes, which consist of a counter-bore of the appropriate diameter and depth for the cartridge, and a Ø0.40″ through-hole to allow the bullet and/or the neck of the cartridge to fit through. The Timers are a Silver color normally, but Alex has a few in black.
Alex offers three sizes of caddies: 6MM for 6mm cartridges with .308-size rim; 308W for .308 Win/.284 Win size cartridges; and Magnum for 300 WSM and similar magnum diameter cases.
6MM – For 6mm family, which will accommodate 6mmBR, 30BR, 6×47, and other cartridges based on the .308 base. (Counter bore is Ø0.50” x 0.8” deep)
Price: $75 including USPS priority shipping with tracking number provided.
308W – For .308 Win, 6.5-284, .284 Win, and similar cartridges based on the .308 and .284 cases. (Counter bore is Ø0.52” x 1.0” deep)
Price: $75 including USPS priority shipping with tracking number provided.
MAGNUM – For 300WSM, 300RUM and similar cartridges with larger diameter bases.
(Counter bore is Ø0.56” x 1.0” deep)
Price: $85 including USPS priority shipping with tracking number provided.
Share the post "Forum Member Offers Hand-Crafted Oak Cartridge Caddies"
August 5th, 2013
The beautifully-made Pistol Dynamics (PD) Products Cartridge Caddy has become popular with many top shooters. USA F-Class Shooting Team members Shiraz Balolia, Kenny Adams and others rely on these caddies to access ammo and keep time. By providing a clear, unmistakable visual display of time remaining and rounds fired, these ammo caddies make life easier for shooter, scorer, and coach.
To celebrate the 2013 F-Class World Championship in Raton, New Mexico this month, PD Products, through its Formula-F Division, has introduced a limited run of sequentially-numbered World Championship Caddies with F-Class World Championship graphics and optional name engraving. Production of these 25-round caddies will be limited by the number of units sold to participants of the match and will cease after that point.
Caddies Custom-Fit Your Choice of Cartridge
Caddies are available for a variety of cartridge types from .223 Rem to 7mm Magnum. Some Caddies are multi-caliber capable. For example, the .308 block accepts .308 Win, .243 Win, 7mm08, and other .308 family variants. Limited-edition ‘World Shoot Caddies’ cost $140.00 (shipping included) with optional name engraving for $20.00 extra (at time of purchase).
Original Caddy Also Available for $110.00
PD Products’ original On-Time Caddy is still available for $110.00, including standard shipping within the continental USA. Custom name engraving is also available on this product. Both the original PD Products Caddy and the special Limited Edition World Championship Caddy come with a lifetime warranty on machined parts and one year on the timer.
To learn more about the special ‘World Shoot’ Caddy or the original On-Time Caddy visit the
PD Products website, call (321) 733-1266, or send email to: info [at] pistoldynamics.com .
Share the post "‘World Championship’ Cartridge Caddies from Pistol Dynamics"
|
