June 22nd, 2013

CDI Precision Bottom Metal and Single-Shot Loading Blocks

CDI Precision gunworksRun by Jeff Allen in Florida, CDI Precision Gunworks offers high-quality, mag-capable bottom metal for a wide variety of rifles and action types. The CDI bottom metal kits, priced at $209.00, feature an integrated trigger guard, mag-well, magazine release, and, of course, action-screw locations.

Most kits are designed for use with Accuracy International (AI) magazines, sold separately. These bottom metal kits are nicely finished and gunsmiths tell us that the fit is extremely good. CDI currently offers bottom metal kits for all these rifle/action types:

• Howa 1500 Short Action
• Howa 1500 Long Action
• FN-SPR Rifles (Also works on FN-PBR rifles)
• Remington 700 Short Action (.308, .300 WSM/7MM WSM, .223 mags work as well)
• Remington 700 Long Action (300 Win Mag, 338 Lapua, 338 CIP Mag box is available)
• Savage Short Action — (Both 4.275″ stagger-feed and newer 4.400″ Center feed)
• Savage Long Action (Call for Tech Data)
• Tikka T3 (Long and Short Action)
• Winchester Short Action (All Post 1964)
• Winchester Long Action, Short Box (.308 Win Length)
• Winchester Long Action Magnum Length (7MM Rem Mag and 300 Win Mag)
• Mauser 98 Large Ring action (.308 Win Mag box size)

CDI Precision Bottom Metal accurateshooter.com

CDI Precision Bottom Metal accurateshooter.com

CDI Precision Bottom Metal accurateshooter.com

CDI Precision Bottom Metal accurateshooter.com

Single-Shot Loading Blocks just $35.00
CDI has designed a single-shot loading block (SSLB) for use with CDI short action bottom metal kits. The SSLB lets you shoot your rifle in single-shot mode without a magazine. Simply place a round on the black cartridge-holder and close your bolt. This is a good set-up for load testing from the bench, or if you want to shoot very long bullets with a COAL greater than magazine length. CDI’s SSLB costs just $35.00 plus $5.00 shipping.

CDI Precision Bottom Metal accurateshooter.com