Eurooptic vortex burris nightforce sale




teslong borescope digital camera barrel monitor


As an Amazon Associate, this site earns a commission from Amazon sales.









February 11th, 2024

Sunday GunDay: 20 Practical 4200+ FPS Varmint Rifle

.20 20 practical varmint cartridge .204 Tikka lilja Warren

Do you have .20-Cal fever? Do you yearn to see what a 4200+ fps projectile can do to an unsuspecting prairie dog? Well you could go out and purchase a 204 Ruger rifle, fork over the money for a new, complete die set, and hope that the brass is in stock. Warren B (aka “Fireball”) has a more cost-effective solution. If you have .223 Rem dies and brass, all you need to shoot the 20 Practical is a new barrel and a .230″ bushing to neck down your .223 Rem cases. Warren’s wildcat is simple, easy, and economical. And the 20 Practical matches the performance of the highly-publicized 20 Tactical with less money invested and no need to buy forming dies or fire-form cases. Warren’s cartridge was aptly named. Practical it is.

20 Practical Tikka Bolt Action for Varminting

by Warren B (aka “Fireball”) and Kevin Weaver

After building my 20 PPC, I wanted to do another .20 caliber, this time a repeater for predator hunting that could also serve as a gopher/prairie dog rifle. I wanted to use a Tikka M595 stainless sporter I had. This rifle is the ultimate repeater with an extremely smooth-feeding cycle from its single-column magazine. Since the Tikka was a .223 Remington from the factory, I first looked at possible case designs that would fit the magazine. The 204 Ruger was a very new round at the time and brass was scarce. I also didn’t care for the overly long case design or the standard throat dimensions of the cartridge. I then looked at the 20 Tactical. It was a nice cartridge but I didn’t like the fact that (at the time) an ordinary two-die Tac 20 set with just a plain full-length die and standard seater were $150. Not only did the costs bother me, but I was accustomed to using a Redding die set featuring a body die, a Type-S bushing neck die, and a Competition seater. To be honest, I also didn’t care for the 20 Tactical’s name–there is absolutely nothing tactical about the cartridge. I didn’t want to adopt a new cartridge based on what I perceived to be a marketing gimmick (that “tactical” title).


Warren B, aka “Fireball”, with his Tikka 595. With its smooth action and phenolic single-column mag, it cycles perfectly in rapid fire.

.20 20 practical varmint cartridge .204 Tikka lilja WarrenSimply Neck Down .223 Rem to Make a 20-223 Wildcat
I decided the best thing to do for my purposes was to simply neck down the .223 Rem case and make a 20-223. I already had the dies, the brass, and a rifle that would feed it perfectly. I decided to call the cartridge the 20 Practical because as you will see in this article, it truly is a very practical cartridge. In addition to the generous and inexpensive availability of brass and dies, the 20 Practical is an easy case to create, requiring no fire forming as a final step. Simply neck your .223 Rem cases down, load and shoot.

[Editor’s Note: Over the years, other shooters have experimented with .223 Remington cases necked down to .20 caliber, some with longer necks, some with different shoulder angles. Warren doesn’t claim to be the first fellow to fit a .20-caliber bullet in the .223 case. He gives credit to others who did pioneering work years ago. But he has come up with a modern 20-223 wildcat that involves no special case-forming, and minimal investment in dies and tooling. He commissioned the original PTG 20 Practical reamer design, and he and Kevin did the field testing to demonstrate the performance of this particular version.]

I chose Kevin Weaver at Weaver Rifles to fit and chamber the barrel to my rifle. Kevin does excellent work and is great to work with. Kevin liked the idea of the 20 Practical so much he agreed to purchase the project reamer. (BTW Kevin didn’t even need to purchase a Go/No-Go gauge, he just used an existing .223 Rem gauge.)

Before Kevin ordered the reamer, I talked over the reamer specs with him. My priorities were tolerances on the tight end of the .223 Rem SAAMI specification, a semi-fitted neck with no need for neck-turning, and a short throat so that we could have plenty of the 32gr V-Max in the case and still touch the lands. I also wanted this short throat in case [anyone] wanted to chamber an AR-15 for the 20 Practical. A loaded 20 Practical round will easily touch the lands on an AR-15 while fitting into the magazine with no problem. With its standard 23-degree shoulder, the 20 Practical case also feeds flawlessly through an AR-15.

As for the barrel, I only use Liljas on my rifles. I have had great luck with them. They have always shot well and they clean up the easiest of any barrels that I have tried. I had previously sent my Tikka barreled action to Dan Lilja so that he could program a custom contour into his equipment and turn out a barrel that would perfectly fit the factory M595 sporter stock. There isn’t much material on an M595 sporter stock so the contour had to match perfectly and it did. Dan Lilja now has this custom contour available to anyone who would like to rebarrel their M595 sporter with one of his barrels.

There Are Plenty of Good .204-Caliber Varmint Bullet Options
20 Practical .204 Ruger .20 caliber bullets

How to Form 20 Practical Cases — Simple and Easy
Forming 20 Practical cases is very easy. No fire-forming is required. Start with any quality .223 Rem brass. Then simply run the case into your bushing die with the appropriate bushing and call it done.

Project Componentry
My 20 Practical rifle started out as a Tikka Model 595 Stainless Sporter in .223 Remington. Though the M595 is no longer imported, if you shop around you can find M595 Sporters for bargain prices. Mine cost under $500. I think the action alone is worth that! The receiver has a milled dovetail for scope rings plus a side bolt release like expensive BR actions. The bolt cycles very smoothly. Ammo is handled with super-reliable 3- or 5-round detachable single-column magazines (FYI, Tikka’s M595 22-250 mags will feed a 6BR case flawlessly.) We kept the standard Tikka trigger but fitted it with a light-weight spring. Now the trigger pull is a crisp 1.8 pounds–about as good as it gets in a factory rifle. We replaced the factory tube with a custom, 24″, 3-groove Lilja 12-twist barrel. Dan Lilja created a special M595 sporter contour to allow a perfect “drop-in” fit with the factory stock. For optics, I’ve fitted a Leupold 4.5-14x40mm zoom in low Talley light-weight aluminum mounts. All up, including optics and sling, my 20 Practical weighs just under 8.5 pounds.

Test Report–How’s It Shoot?
I sent the barrel and barreled action to Kevin and in a very short time it was returned. Kevin did a perfect job on the rifle. I had asked him to try to match the bead blasted finish of the Tikka when he finished the new barrel. It came out perfect and the only way one can tell it is a custom is the extra two inches of length and the “20 Practical” cartridge designation.

So, no doubt you’re asking “how does she shoot?” Is my “prototype”, first-ever 20 Practical an accurate rig? In a word, yes. Even with the standard factory stock, and light contour barrel, it can shoot 3/8″ groups. Take a look at the typical target from this rifle. This is from an 8.5-pound sporter with a very skinny fore-end and a factory trigger.

Gunsmith’s Report from Kevin Weaver
The 20 Practical: Origins and Development

Editor’s NOTE: We can’t say for sure who first necked down the .223 Rem to .20 caliber and chambered a rifle for that wildcat (as opposed to the .20 Tactical). But here is an account from way back in 2006 when the Warren B first came up with the idea of a .20 Practical cartridge, complete with reamer specs.

A year ago I received a call from Warren with a great idea. Warren asked “Why couldn’t we simply neck down the .223 Remington case to 20 caliber and get basically the same performance as the 20 Tactical? This way you can forgo the expensive forming dies that are needed for the 20 Tactical.” The idea made perfect sense to me, and I saw no major technical issues, so we got started on the project. I ordered a reamer from Dave Kiff at Pacific Tool & Gauge (PTG) with a .233″ neck. The .233″ neck should allow for a simple necking-down of the 223 Remington case to produce the 20 Practical in just one step. No fire-forming necessary! Furthermore, the PTG 20 Practical reamer Dave created should work with any available .223 Rem brass, commercial or military.

The first 20 Practical round was launched down range (through Warren’s Tikka) just a few months later. The brass formed as easily as expected. All one needs is a Redding type “S” bushing die with a .230 bushing and with just one step I had a .20 caliber case ready to shoot. Warren is brilliant. [Editor’s Note: We concur. For more details on Warren’s case-forming methods and his tips for adapting .223 Rem dies, read the technical sections further down the page.]

It would be almost six months later until I got around to building a dedicated test rifle chambered for the 20 Practical. I used a Remington 722 action, Remington synthetic semi-varmint stock, and a 24″ Douglas stainless steel XX 12-twist barrel. I formed and loaded about 30 cases using Remington brass in about 20 minutes. I used a .223 Rem seating die to seat the 20 Practical bullets. The .223 seating stem seated the small 20-Cal bullets just fine. The first loads sent the 40gr Hornady V-Max bullets down range at a modest 3500 FPS. I did not shoot for groups. I just wanted to use this load to sight in the rifle and break in the barrel. Load development was painless–I used reduced .223 Rem loads for 40gr bullets and worked up from there. In the table below are some of my preferred loads as well as Warren’s favorite recipes for his 20 Practical.

Bullet Wt. Powder Charge Wt. Velocity FPS Comments
32GR H4198 24.1 4025 Warren’s lighter gopher load
32GR AA2460 27.8 4154 Warren’s coyote/prairie dog load
32GR N133 26.0 4183 Coyote/PD load, clean burn
33GR H4198 26.0 4322 Hot Load. Use with Caution!
33GR N133 27.0 4255 Kevin: 0.388” 5 shot group
40GR H335 25.0 3583 Kevin’s barrel break-in load
40GR H4198 24.0 3907 Hodgdon “Extreme” Powder
40GR IMR4895 26.0 3883 Kevin: 0.288″ 5-shot group
40GR N133 25.0 3959 Kevin: 0.227″ 5-shot group
Warren’s Load Notes: My pet loads are all with IMI cases, 32gr Hornady V-Maxs, and Fed 205 primers (not match). These are the most accurate loads in my rifle so far. I haven’t even bothered with the 40s as I have the 20 PPC and 20 BR for those heavier bullets. I prefer the lighter bullets in the 20 Practical because I wanted to keep speed up and recoil down in this sporter-weight predator rifle. Also, the 32gr V-Max is exceptionally accurate and explosive. I like N133 the best as it burns so clean. IMI cases are tough and well-made.
Kevin’s Load Notes: I used Remington 223 cases, Hornady V-Max bullets, and Remington 6 1/2 primers to develop the above loads. CAUTION: all loads, both Warren’s and mine, should be reduced 20% when starting load development in your rifle. All load data should be used with caution. Always start with reduced loads first and make sure they are safe in each of your guns before proceeding to the high test loads listed. Since Weaver Rifles has no control over your choice of components, guns, or actual loadings, neither Weaver Rifles nor the various firearms and components manufacturers assume any responsibility for the use of this data.

Comparing the 20 Practical and 20 Tactical
Kevin tells us: “The 20 Practical and the 20 Tactical are almost identical cartridges. There are only slight differences in case Outside Diameter, shoulder angle, and case body length. The neck length on the 20 Tactical is a bit longer, but there is still plenty of neck on the 20 Practical to grip the popular bullets, such as the 32gr V-Max. Here are some specs:

Cartridge Bolt face to shoulder Shoulder O.D. Shoulder Angle Total length
20 Tactical 1.5232″ .360 30° 1.755″
20 Practical 1.5778″ .3553 23° 1.760″

Both the 20 Tactical and the 20 Practical are fine .20 caliber cartridges. Early on, the 20 Tactical was the more popular of the two because it had more publicity. However, my favorite would be the 20 Practical. Warren’s 20 Practical gives the SAME performance as the 20 Tactical without fire-forming, or having to buy expensive forming dies. So with the 20 Practical you do less work, you shell out a lot less money, yet you give up nothing in performance. What’s not to like? To create 20 Practical cases, just buy a .223 Rem Redding Type “S” Bushing Die set with a .230 or .228 bushing and have fun with this great little cartridge.”

(more…)

Permalink - Articles, Bullets, Brass, Ammo, Hunting/Varminting No Comments »
April 18th, 2021

Sunday Gunday: 20 Practical 4200+ FPS Varmint Slayer

.20 20 practical varmint cartridge .204 Tikka lilja Warren

Do you have .20-Cal fever? Do you yearn to see what a 4200+ fps projectile can do to an unsuspecting prairie dog? Well you could go out and purchase a 204 Ruger rifle, fork over the money for a new, complete die set, and hope that the brass is in stock. Warren B (aka “Fireball”) has a more cost-effective solution. If you have .223 Rem dies and brass, all you need to shoot the 20 Practical is a new barrel and a .230″ bushing to neck down your .223 cases. Warren’s wildcat is simple, easy, and economical. And the 20 Practical matches the performance of the highly-publicized 20 Tactical with less money invested and no need to buy forming dies or fire-form cases. Warren’s cartridge was aptly named. Practical it is.

20 Practical Tikka Bolt Action for Varminting

by Warren B (aka “Fireball”) and Kevin Weaver

After building my 20 PPC, I wanted to do another .20 caliber, this time a repeater for predator hunting that could also serve as a gopher/prairie dog rifle. I wanted to use a Tikka M595 stainless sporter I had. This rifle is the ultimate repeater with an extremely smooth-feeding cycle from its single-column magazine. Since the Tikka was a .223 Remington from the factory, I first looked at possible case designs that would fit the magazine. The 204 Ruger was a very new round at the time and brass was scarce. I also didn’t care for the overly long case design or the standard throat dimensions of the cartridge. I then looked at the 20 Tactical. It was a nice cartridge but I didn’t like the fact that (at the time) an ordinary two-die Tac 20 set with just a plain full-length die and standard seater were $150. Not only did the costs bother me, but I was accustomed to using a Redding die set featuring a body die, a Type-S bushing neck die, and a Competition seater. To be honest, I also didn’t care for the 20 Tactical’s name–there is absolutely nothing tactical about the cartridge. I didn’t want to adopt a new cartridge based on what I perceived to be a marketing gimmick (that “tactical” title).


Warren B, aka “Fireball”, with his Tikka 595. With its smooth action and phenolic single-column mag, it cycles perfectly in rapid fire.

.20 20 practical varmint cartridge .204 Tikka lilja WarrenSimply Neck Down .223 Rem to Make a 20-223 Wildcat
I decided the best thing to do for my purposes was to simply neck down the .223 Rem case and make a 20-223. I already had the dies, the brass, and a rifle that would feed it perfectly. I decided to call the cartridge the 20 Practical because as you will see in this article, it truly is a very practical cartridge. In addition to the generous and inexpensive availability of brass and dies, the 20 Practical is an easy case to create, requiring no fire forming as a final step. Simply neck your .223 Rem cases down, load and shoot.

[Editor’s Note: Over the years, other shooters have experimented with .223 Remington cases necked down to .20 caliber, some with longer necks, some with different shoulder angles. Warren doesn’t claim to be the first fellow to fit a .20-caliber bullet in the .223 case. He gives credit to others who did pioneering work years ago. But he has come up with a modern 20-223 wildcat that involves no special case-forming, and minimal investment in dies and tooling. He commissioned the original PTG 20 Practical reamer design, and he and Kevin did the field testing to demonstrate the performance of this particular version.]

I chose Kevin Weaver at Weaver Rifles to fit and chamber the barrel to my rifle. Kevin does excellent work and is great to work with. Kevin liked the idea of the 20 Practical so much he agreed to purchase the project reamer. (BTW Kevin didn’t even need to purchase a Go/No-Go gauge, he just used an existing .223 Rem gauge.)

Before Kevin ordered the reamer, I talked over the reamer specs with him. My priorities were tolerances on the tight end of the .223 Rem SAAMI specification, a semi-fitted neck with no need for neck-turning, and a short throat so that we could have plenty of the 32gr V-Max in the case and still touch the lands. I also wanted this short throat in case [anyone] wanted to chamber an AR-15 for the 20 Practical. A loaded 20 Practical round will easily touch the lands on an AR-15 while fitting into the magazine with no problem. With its standard 23-degree shoulder, the 20 Practical case also feeds flawlessly through an AR-15.

As for the barrel, I only use Liljas on my rifles. I have had great luck with them. They have always shot well and they clean up the easiest of any barrels that I have tried. I had previously sent my Tikka barreled action to Dan Lilja so that he could program a custom contour into his equipment and turn out a barrel that would perfectly fit the factory M595 sporter stock. There isn’t much material on an M595 sporter stock so the contour had to match perfectly and it did. Dan Lilja now has this custom contour available to anyone who would like to rebarrel their M595 sporter with one of his barrels.

There Are Plenty of Good .204-Caliber Varmint Bullet Options
20 Practical .204 Ruger .20 caliber bullets

How to Form 20 Practical Cases — Simple and Easy
Forming 20 Practical cases is very easy. No fire-forming is required. Start with any quality .223 Rem brass. Then simply run the case into your bushing die with the appropriate bushing and call it done.

Project Componentry
My 20 Practical rifle started out as a Tikka Model 595 Stainless Sporter in .223 Remington. Though the M595 is no longer imported, if you shop around you can find M595 Sporters for bargain prices. Mine cost under $500. I think the action alone is worth that! The receiver has a milled dovetail for scope rings plus a side bolt release like expensive BR actions. The bolt cycles very smoothly. Ammo is handled with super-reliable 3- or 5-round detachable single-column magazines (FYI, Tikka’s M595 22-250 mags will feed a 6BR case flawlessly.) We kept the standard Tikka trigger but fitted it with a light-weight spring. Now the trigger pull is a crisp 1.8 pounds–about as good as it gets in a factory rifle. We replaced the factory tube with a custom, 24″, 3-groove Lilja 12-twist barrel. Dan Lilja created a special M595 sporter contour to allow a perfect “drop-in” fit with the factory stock. For optics, I’ve fitted a Leupold 4.5-14x40mm zoom in low Talley light-weight aluminum mounts. All up, including optics and sling, my 20 Practical weighs just under 8.5 pounds.

Test Report–How’s It Shoot?
I sent the barrel and barreled action to Kevin and in a very short time it was returned. Kevin did a perfect job on the rifle. I had asked him to try to match the bead blasted finish of the Tikka when he finished the new barrel. It came out perfect and the only way one can tell it is a custom is the extra two inches of length and the “20 Practical” cartridge designation.

So, no doubt you’re asking “how does she shoot?” Is my “prototype”, first-ever 20 Practical an accurate rig? In a word, yes. Even with the standard factory stock, and light contour barrel, it can shoot 3/8″ groups. Take a look at the typical target from this rifle. This is from an 8.5-pound sporter with a very skinny fore-end and a factory trigger.

Gunsmith’s Report from Kevin Weaver
The 20 Practical: Origins and Development

Editor’s NOTE: We can’t say for sure who first necked down the .223 Rem to .20 caliber and chambered a rifle for that wildcat (as opposed to the .20 Tactical). But here is an account from way back in 2006 when the Warren B first came up with the idea of a .20 Practical cartridge, complete with reamer specs.

A year ago I received a call from Warren with a great idea. Warren asked “Why couldn’t we simply neck down the .223 Remington case to 20 caliber and get basically the same performance as the 20 Tactical? This way you can forgo the expensive forming dies that are needed for the 20 Tactical.” The idea made perfect sense to me, and I saw no major technical issues, so we got started on the project. I ordered a reamer from Dave Kiff at Pacific Tool & Gauge (PTG) with a .233″ neck. The .233″ neck should allow for a simple necking-down of the 223 Remington case to produce the 20 Practical in just one step. No fire-forming necessary! Furthermore, the PTG 20 Practical reamer Dave created should work with any available .223 Rem brass, commercial or military.

The first 20 Practical round was launched down range (through Warren’s Tikka) just a few months later. The brass formed as easily as expected. All one needs is a Redding type “S” bushing die with a .230 bushing and with just one step I had a .20 caliber case ready to shoot. Warren is brilliant. [Editor’s Note: We concur. For more details on Warren’s case-forming methods and his tips for adapting .223 Rem dies, read the technical sections further down the page.]

It would be almost six months later until I got around to building a dedicated test rifle chambered for the 20 Practical. I used a Remington 722 action, Remington synthetic semi-varmint stock, and a 24″ Douglas stainless steel XX 12-twist barrel. I formed and loaded about 30 cases using Remington brass in about 20 minutes. I used a .223 Rem seating die to seat the 20 Practical bullets. The .223 seating stem seated the small 20-Cal bullets just fine. The first loads sent the 40gr Hornady V-Max bullets down range at a modest 3500 FPS. I did not shoot for groups. I just wanted to use this load to sight in the rifle and break in the barrel. Load development was painless–I used reduced .223 Rem loads for 40gr bullets and worked up from there. In the table below are some of my preferred loads as well as Warren’s favorite recipes for his 20 Practical.

Bullet Wt. Powder Charge Wt. Velocity FPS Comments
32GR H4198 24.1 4025 Warren’s lighter gopher load
32GR AA2460 27.8 4154 Warren’s coyote/prairie dog load
32GR N133 26.0 4183 Coyote/PD load, clean burn
33GR H4198 26.0 4322 Hot Load. Use with Caution!
33GR N133 27.0 4255 Kevin: 0.388” 5 shot group
40GR H335 25.0 3583 Kevin’s barrel break-in load
40GR H4198 24.0 3907 Hodgdon “Extreme” Powder
40GR IMR4895 26.0 3883 Kevin: 0.288″ 5-shot group
40GR N133 25.0 3959 Kevin: 0.227″ 5-shot group
Warren’s Load Notes: My pet loads are all with IMI cases, 32gr Hornady V-Maxs, and Fed 205 primers (not match). These are the most accurate loads in my rifle so far. I haven’t even bothered with the 40s as I have the 20 PPC and 20 BR for those heavier bullets. I prefer the lighter bullets in the 20 Practical because I wanted to keep speed up and recoil down in this sporter-weight predator rifle. Also, the 32gr V-Max is exceptionally accurate and explosive. I like N133 the best as it burns so clean. IMI cases are tough and well-made.
Kevin’s Load Notes: I used Remington 223 cases, Hornady V-Max bullets, and Remington 6 1/2 primers to develop the above loads. CAUTION: all loads, both Warren’s and mine, should be reduced 20% when starting load development in your rifle. All load data should be used with caution. Always start with reduced loads first and make sure they are safe in each of your guns before proceeding to the high test loads listed. Since Weaver Rifles has no control over your choice of components, guns, or actual loadings, neither Weaver Rifles nor the various firearms and components manufacturers assume any responsibility for the use of this data.

Comparing the 20 Practical and 20 Tactical
Kevin tells us: “The 20 Practical and the 20 Tactical are almost identical cartridges. There are only slight differences in case Outside Diameter, shoulder angle, and case body length. The neck length on the 20 Tactical is a bit longer, but there is still plenty of neck on the 20 Practical to grip the popular bullets, such as the 32gr V-Max. Here are some specs:

Cartridge Bolt face to shoulder Shoulder O.D. Shoulder Angle Total length
20 Tactical 1.5232″ .360 30° 1.755″
20 Practical 1.5778″ .3553 23° 1.760″

Both the 20 Tactical and the 20 Practical are fine .20 caliber cartridges. At present, the 20 Tactical is the more popular of the two because it has had more publicity. However, my favorite would be the 20 Practical. Warren’s 20 Practical gives the SAME performance as the 20 Tactical without fire-forming, or having to buy expensive forming dies. So with the 20 Practical you do less work, you shell out a lot less money, yet you give up nothing in performance. What’s not to like? To create 20 Practical cases, just buy a .223 Rem Redding Type “S” Bushing Die set with a .230 or .228 bushing and have fun with this great little cartridge.”

(more…)

Permalink - Articles, Gear Review, Hunting/Varminting, Tech Tip No Comments »
February 22nd, 2012

Check Out the Deals in Our Forum Classifieds — Guns, Optics, Gear

Thousands of shooting enthusiasts visit our Shooters’ Forum every day. The Forum now boasts over 16,600 members. One of the “main attractions” in our Forum are the Free Classified Ads. There you’ll find a huge selection of “previously owned” merchandise — everything from complete, top-flight match rifles to reloading components. There are great bargains on used hand-loading equipment — presses, dies, case prep tools, and miscellaneous hardware. You’ll also find scopes, rings, rangefinders and spotting scopes. This is one of the richest repositories of pre-owned precision shooting equipment you’ll find anywhere on the internet. Here are some of the gun offerings in the Forum Classifieds right now:

Guns and Actions

Here are some pix of that Cooper:

Message for Classified Sellers — How to Remove a Product Listing
For those of you who already sell items in our Classifieds, we have one request: delete your ad when the item sells. After guys sell their goods successfully, some of them neglect to delist their products and remove their ad. We suspect some newcomers to the site haven’t bothered to read the instructions. But it’s very, very easy to remove your advert once you’ve sold your stuff. In fact, you can delete your ad in a matter of seconds, with just two clicks of your mouse!

First, find the ad you placed in our FORUM MARKETPLACE. Then simply scroll down to the end of the thread (below all the replies) and look for the gray “Remove Topic” button. Click that and you’re done. Now wasn’t that easy?

AccurateShooter.com forum

Permalink Hot Deals No Comments »
December 14th, 2008

Varmint Hunters Association Offers Online Resources

Varmint Hunters AssnThe Varmint Hunters’ Assocation (VHA) publishes an excellent print publication, the Varmint Hunter magazine. In addition, the VHA offers a wealth of online resources. On the VHA Website, VarmintHunter.org, you’ll find lots of useful features, including Event Calendar, online store, shooting and safety tips, and select reprints from Varmint Hunter magazine. Right now you can read a free feature article by Thomas Tabor on the 20 VarTarg cartridge in a Cooper model 21 Montana Varminter. If you’re a fan of small, efficient cartridges for varminting, this article is a “must-read”. Here are links to the 20 VarTarg story, and three other excellent articles from Varmint Hunter Magazine:

20 VarTarg in Cooper Montana Varminter

Precision Ballistic Charts–A Critical Aid To Long-Range Shooting

Trials And Tribulations Of Making The Long Shot

Stand And Deliver: 10 Tricks… To Be A Better Coyote Hunter

Files are Adobe Acrobat (.pdf) format. Copyrighted photos courtesy Varmint Hunters Association, All Rights Reserved.

Permalink - Articles, Hunting/Varminting No Comments »
November 1st, 2008

Gun Talk Radio Show Tackles Cooper Controversy

antique radioTune in to your radio this Sunday guys. Dan Cooper will be the topic du jour on Tom Gresham’s radio show. If the show is not broadcast in your area, you can stream audio over the internet by visiting www.guntalk.com.

Gresham’s Gun Talk is the #1 firearms-related radio show in the world. Every week, Tom brings together interesting figures in the shooting community. But this week is extra special. Tom and his lead-off guest David Codrea will discuss the controversy involving Dan Cooper. When it was revealed, earlier this week, that Dan Cooper made donations to the Democratic Party, many gun owners expressed concern, and some vowed not to purchase Cooper Rifles. In the heat of the controversy, Dan Cooper resigned his position at Cooper Firearms, but Dan’s politics remain a hot issue. Along with the Cooper controversy, Codrea, Guns magazine columnist and author of a popular web blog, will discuss the the election, and the power of the web for the gun rights movement.

Gresham will also interview Bill Dermody, a marketing exec with Savage Arms. Just this week, it was Bill who provided AccurateShooter.com with an exclusive “sneak preview” of new dual-port rifles in Savage’s 2009 line-up. On Gun Talk, Bill will discuss the Savage product line and general shooting issues. “Bill is a regular on Gun Talk,” Tom Gresham said. “He loves to chat with callers, whether it’s about Savage, or just shooting, hunting and guns in general.”

Savage Benchrest Rifle

Tom Gresham’s Gun Talk is carried on 64 radio stations across the country, streamed on the internet, and broadcast on XM Satellite Radio. The nationally-syndicated live radio show will be broadcast Sunday, November 2, starting at 2:00pm Eastern Time.

Permalink News No Comments »
August 16th, 2008

Cooper Firearms One-Shot Competition in Montana

Today, Cooper Firearms hosts its annual One-Shot Competition. Originally conceived as a fun promotional contest to help Cooper find its niche with the shooting public, the One-Shot Competition has grown into a nationally-recognized event. Rifles must have Cooper actions and stocks made by Cooper or a recognized Cooper Arms vendor. The premise is straightforward. Shooters get one (1) shot at a dot the size of a pencil eraser at 150 yards. No sighters. No spotting scopes. The closest shooter wins the target to take home to put on his wall and a chance to compete for a new rifle.

Cooper Firearms One-Shot

One Shot at a Dot on an Oil Painting
What makes this competition unique is that the targets are placed on a collection of oil paintings! Eight shooters are assigned to each painting. Their eight names, and corresponding numbers (1-8), are written around the edge of the canvas. The target is a 1/4″ dot on a paper paster target that measures about 2 inches in diameter. One at a time, competitors take a shot at their paster. Shooters are judged by the bullet strike relative to this 2″ paster, not the symbolic target added to the painting as a reference point. The bullet hitting closest to the target’s center will win the painting. The top two shooters on each painting get a chance to compete for the grand prize, a wood-stocked Cooper TRP-3 rimfire benchrest rifle.

Cooper Firearms One-Shot

The one-shot competition carries a hefty $150.00 entry fee, but there is a 100% payout of the entry fee to the winners of each group shoot. The one-shot competition officially begins today, August 16, at 9:30 am. After lunch (catered by Cooper), the painting shoots commence. The final competition for the TRP-3 will begin around 3:00 p.m. At 6:00 p.m., Cooper’s all-you-can-eat and drink party (which is rightfully as famous as the competition itself) caps off the event.

Note: It’s too late to sign up for the 2008 event, but next year, if you own a Cooper, you might head up to Montana and join the Cooper folks for a one-of-a-kind competition.

Permalink Competition, Hunting/Varminting No Comments »