Eurooptic vortex burris nightforce sale




teslong borescope digital camera barrel monitor


As an Amazon Associate, this site earns a commission from Amazon sales.









December 17th, 2021

Hornady Iron Press with Optional Auto Prime System

Hornady Iron Press Lock-N-Lock LNL 2016 single stage press rockchucker

Right now reloading presses are in high demand. If you are shopping for a single-stage press, here’s a good press you may still find available at many vendors. The Hornady Iron Press features a super-strong, pyramid-style cast-iron frame with an open front. A clever optional “automatic” priming system shuttles primers from a vertical tube in the back to the shell-holder in the front. This is very clever engineering. The Auto-Prime system is sold separately or as part of the Iron Press Reloading Kit.


Hornady Iron Press Lock-N-Lock LNL 2016 single stage press rockchucker

The broad top of the beefy (26-lb.) Iron Press can hold case prep tools (such as chamfer tool and case-neck brush) and/or a box for bullets or brass. NOTE: This is NOT a turret press — you can only use one die at a time. However, Hornady offers an accessory “Die Caddy” (sold separately) that can hold up to three (3) more dies. That way you can quickly switch from a sizing die to a seater die (or vice-versa). What Hornady calls the “Accessory Mounting Deck” gives quick access to items such as trays for bullets or cases, chamfer and deburr tools, case neck brushes, primer pocket cleaners and other accessories. The Iron Press comes with the Lock-N-Load® bushing system which allows for rapid die changes.

Hornady Iron Press Lock-N-Lock LNL 2016 single stage press rockchucker

Optional Auto Prime Shuttle Priming System

The optional auto-priming system is a real selling point for this press we think. When you move the press handle rearwards, a horizontal bar toggles back to pick up a primer from the column in the rear of the press. Then this same bar move forwards to place the fresh primer in the center of the shell-holder. Hornady explains: “The available gravity-fed Automatic Priming System (sold separately or with the Lock-N-Load® Iron Press Reloading Kit), combined with the Accessory Mounting Deck, increases reloading efficiency by allowing more processes to occur simultaneously. The Iron Press is the first of its kind to allow the ability to deprime, pause, and remove the case to chamfer & deburr … then replace and prime.” This video shows how to install and operate the Auto Prime system.

Video Shows Set-up and Operation of Gravity-Fed Shuttle Priming System:

Permalink - Videos, Gear Review, Reloading No Comments »
January 26th, 2021

Hornady Iron Press with Innovative Shuttle Priming System

Hornady Iron Press Lock-N-Lock LNL 2016 single stage press rockchucker

Right now reloading presses are in high demand. If you are shopping for a single-stage press, here’s a good press you may still find available at many vendors. The Hornady Iron Press™ features a super-strong, pyramid-style cast-iron frame with an open front. A clever optional “automatic” priming system shuttles primers from a vertical tube in the back to the shell-holder in the front. This is very clever engineering. You really should watch the video — it shows the patented auto-priming system in action. The Auto-Prime system is sold separately or as part of the Iron Press Reloading Kit.

Watch this Video to See Gravity-Fed Shuttle Priming System (00:45, 01:00):

Hornady Iron Press Lock-N-Lock LNL 2016 single stage press rockchucker

Optional Automatic Priming System
The optional auto-priming system is a real selling point for this new press we think. When you move the press handle rearwards, a horizontal bar toggles back to pick up a primer from the column in the rear of the press. Then this same bar move forwards to place the fresh primer in the center of the shell-holder. Hornady explains: “The available gravity-fed Automatic Priming System (sold separately or with the Lock-N-Load® Iron Press™ Reloading Kit), combined with the Accessory Mounting Deck, increases reloading efficiency by allowing more processes to occur simultaneously. The Iron Press™ is the first of its kind to allow the ability to deprime, pause, and remove the case to chamfer & deburr … then replace and prime.” Do watch the video to see the priming system in action.

Hornady Iron Press Lock-N-Lock LNL 2016 single stage press rockchucker

The broad top of the beefy (26-lb.) Iron Press can hold case prep tools (such as chamfer tool and case-neck brush) and/or a box for bullets or brass. NOTE: This is NOT a turret press — you can only use one die at a time. However, Hornady offers an accessory “Die Caddy” (sold separately) that can hold up to three (3) more dies. That way you can quickly switch from a sizing die to a seater die (or vice-versa). What Hornady calls the “Accessory Mounting Deck” gives quick access to items such as trays for bullets or cases, chamfer and deburr tools, case neck brushes, primer pocket cleaners and other accessories. The Iron Press comes with the Lock-N-Load® bushing system which allows for rapid die changes.

Permalink - Videos, Bullets, Brass, Ammo, Gear Review, Reloading No Comments »
October 31st, 2015

Hornady’s Rugged New Open-Front Iron Press

Hornady Iron Press Lock-N-Lock LNL 2016 single stage press rockchucker

Hornady has introduced an innovative new single-stage press with some very impressive features. The new-for-2016 Hornady Iron Press™ features a super-strong, pyramid-style cast-iron frame with an open front. A very clever optional “automatic” priming system shuttles primers from a vertical tube in the back to the shell-holder in the front. We’ve never really seen anything quite like this before. You really should watch the video — it shows the patented auto-priming system in action. This system appears to be a very smart piece of engineering — good job Hornady.

Watch this Video to See Gravity-Fed Shuttle Priming System (00:45, 01:00):

Hornady Iron Press Lock-N-Lock LNL 2016 single stage press rockchucker

The broad top of the beefy (26-lb.) Iron Press can hold case prep tools (such as chamfer tool and case-neck brush) and/or a box for bullets or brass. NOTE: This is NOT a turret press — you can only use one die at a time. However, Hornady offers an accessory “Die Caddy” (sold separately) that can hold up to three (3) more dies. That way you can quickly switch from a sizing die to a seater die (or vice-versa). What Hornady calls the “Accessory Mounting Deck” gives quick access to items such as trays for bullets or cases, chamfer and deburr tools, case neck brushes, primer pocket cleaners and other accessories. The Iron Press comes with the Lock-N-Load® bushing system which allows for rapid die changes.

Hornady Iron Press Lock-N-Lock LNL 2016 single stage press rockchucker

Optional Automatic Priming System
The optional auto-priming system is a real selling point for this new press we think. When you move the press handle rearwards, a horizontal bar toggles back to pick up a primer from the column in the rear of the press. Then this same bar move forwards to place the fresh primer in the center of the shell-holder. Hornady explains: “The available gravity-fed Automatic Priming System (sold separately or with the Lock-N-Load® Iron Press™ Reloading Kit), combined with the Accessory Mounting Deck, increases reloading efficiency by allowing more processes to occur simultaneously. The Iron Press™ is the first of its kind to allow the ability to deprime, pause, and remove the case to chamfer & deburr … then replace and prime.” Do watch the video to see the priming system in action.

Hornady Iron Press Lock-N-Lock LNL 2016 single stage press rockchucker

Permalink - Videos, New Product, Reloading 7 Comments »