September 12th, 2017

Custom Rimfire F-Class Rifle for a Grand-Daughter

Doan Trevor .22 LR rimfire Mango stock Anschutz model 54
The dots and dashes are Morse Code for the shooter’s initials. The wood is Mango with Walnut fore-end wing inlays. The barreled action is an older Anschutz Model 54 that spent years in a prone stock.

Build Report by Doan Trevor
How do you build a stock for the grand-daughter of an award-winning shooter? Over the years I have built five or six rifles for this shooter, and now his grand-daughter had taken an interest in F-Class. He wanted her new rifle to mirror his own F-Class rifle, and he provided me with an old Anschutz Model 54 barreled action. Her new rifle would get her started in rimfire with the possibility of graduating to High Power (centerfire) shooting. The dots and dashes on the sides of the stock are Morse Code for his grand-daughter’s initials — “AMS”.

Rimfire F-Class Stock Design Factors
Typically when I build a rimfire F-Class stock I use the same pattern as I do for High Power stocks. The pattern has evolved from my prone stocks, as it has proven very successful with time. Also, there is a known issue of using wood for a stock in F-Class. The wood needs to be cured, and unfortunately, finding wood in the specific dimension for the stock is near to impossible. Therefore, I inlay pieces in the fore-end making sure that it is straight and on center. Other materials can be used for an F-Class stock, but keeping them straight and centered can be very difficult. Using cured wood during the build process, I continually check the centerline from fore-end to the rear slider, ensuring that the stock stays centered. This helps ensure good tracking and return to point of aim.

Doan Trevor .22 LR rimfire Mango stock Anschutz model 54

Adapting Prone Stock for F-Class Use
There is a current trend of older Palma and prone shooters to convert their rifles for F-TR and F-Open due to eyesight problems and other disabilities. The stocks that they have been using (and loving) can be recycled to their new shooting styles with a few design changes. I have been doing this successfully for the last several years. Whether it be a new shooter or an older one, you can either plan for the future or adapt older equipment so that all can shoot the style that they want. My philosophy in rifle building is to create every rifle with the potential to win a national or world championship. I am proud to say that I have build rifles for Derek Rodgers, Trudie Faye, Lige Harris, Barry Smith, Eric Rhodes, Kent Reeves, Terry Glen and many more award-winning shooters. And I look forward to many more.

Doan Trevor .22 LR rimfire Mango stock Anschutz model 54

What the Heck is .22 LR Rimfire F-Class?
There is no official NRA F-Class rimfire discipline (at least not yet). However, many F-Class shooters (both F-0pen and F-TR) employ .22 LR rifles for low-cost training. For example, James Crofts practices extensively with his 40X rimfire F-TR rig. In addition, many shooting clubs offer F-Class style rimfire fun matches, shot prone with front rest or match bipod. This rifle was built for an F-Class fun match hosted regularly by the Los Angeles Rifle & Revolver Club (LAR&R).

The photo below displays a different Doan Trevor-crafted rifle, a rimfire benchrest rig with Turbo action. This shows how Doan makes the 3-inch-wide fore-end. Outboard left- and right-side wings are bonded to the central stock material, then the wings are carefully shaped for straightness. Getting the geometry “just right” helps the rig track perfectly.

Doan Trevor .22 LR rimfire Mango stock Anschutz model 54

Permalink - Videos, Competition, Gunsmithing No Comments »
July 30th, 2017

Doan Trevor Builds Raffle Rifle for U.S. National Palma Team

Doan Trevor Rifle Raffle U.S. Palma Team Pierce Brux

Our friend Doan Trevor is creating a new raffle rifle. This will be raffled off this fall to support the USA Palma Team. Doan is donating his labor and building the stock from a walnut blank. Pierce Engineering will supply the action and Brux Barrels will provide the barrel.

Doan tells us: “I have volunteered to build another raffle rifle for the U.S. Palma National Rifle Team. Work has begun. I am hoping to have this completed for the Spirit of America Match in Raton, NM this fall. The action has been donated by Pierce Engineering and the long Palma barrel has been donated by Brux Barrels. The one item we are lacking at this point is a Remington-style competition trigger.”

Doan says he will craft the stock from hand-selected American Walnut: “This is [my own] Doan Trevor prone design, modified to be used for F-TR. This can be shot either prone or F-TR (with bipod). This will be similar to the stock that I custom-designed for Derek Rodgers, which won several National Championships and other awards.” The photos below show Doan crafting the wood and starting the bedding on the 2017 U.S. Palma Team Raffle Rifle:

Doan Trevor Rifle Raffle U.S. Palma Team Pierce Brux

Doan Trevor Rifle Raffle U.S. Palma Team Pierce Brux

Another Doan Trevor Raffle Rifle — for the Veterans’ Team
What will the rifle look like when it’s complete? We can’t show you that yet, but here’s another custom Palma rifle Doan crafted for the 2011 U.S. Veterans’ Team. Doan says: “This is the finished rifle for the U.S. Veterans Palma Team raffle for 2011. It carries a unique serial number signifying the 2011 World Championships in Australia.”

Doan Trevor Rifle Raffle U.S. Palma Team Pierce Brux

Doan Trevor Rifle Raffle U.S. Palma Team Pierce Brux

Permalink Competition, Gunsmithing No Comments »
December 26th, 2016

Doan Trevor Carves a Silhouette Special from Koa Wood

Doan Trevor gunstock koa wood silhouette Anschutz rimfire carve stock

Our friend, gunsmith/stockmaker Doan Trevor recently created a lovely, one-of-a-kind silhouette stock for an Anschutz rimfire action. Built as a true custom design, this stock combines ideal standing position ergonomics with light weight — the entire stock weighs a mere two pounds. This project really showcases Doan’s remarkable skills with wood. Read the full story about this project (with more photos) at DoanTrever.com.

Doan explains his design process: “A customer came to me wanting to know if I could build a silhouette stock that was 2 pounds or less. I used the Koa wood because it is a lower specific gravity than Walnut (which makes it lighter) and stronger. I was still able to use pillar bedding and keep the weight down. The fore end could be shortened to reduce the weight even more. Since the drops on a silhouette rifle are different than a prone rifle, I kept the pistol grip from the prone rifle which is comfortable and tried to come up with a higher cheek piece and more drop to the buttplate. All of this required lots of hand carving.”

Doan Trevor gunstock koa wood silhouette Anschutz rimfire carve stock

Doan Trevor gunstock koa wood silhouette Anschutz rimfire carve stock

Permalink Gear Review, Gunsmithing 1 Comment »
December 19th, 2015

Hands of a Master Craftsman — Doan Trevor

Doan Trevor

Doan Trevor is a master gunsmith and stock-maker who works in the old style. He still hand-crafts stocks from start to finish, and does all the metal-work on the custom rifles he builds. Starting with highly-figured woods, Doan carves and shapes his stocks largely by hand, with meticulous attention to detail. Each rifle he builds is optimized for its intended discipline, and custom-fitted for the customer.

Doan Trevor Customer Gunsmithing

With the help of his talented wife Sue (who does the photography and builds the web pages), Doan has created a wonderful website, DoanTrevor.com, that is a feast for the eyes. You can see beautiful wood-stocked rifles being hand-crafted. Doan also illustrates how he creates custom metal parts, and how he beds barreled actions into the finished stocks.

Doan Trevor Customer Gunsmithing

Doan Trevor Customer Gunsmithing
Doan Trevor Customer Gunsmithing

Set aside a few minutes and visit Doan’s website. Be sure to click on the site’s secondary pages: Rifle Building, Woodworking, and Metalworking. You’ll find dozens of high-quality photos and fascinating information on gun-building.

Doan Trevor Customer Gunsmithing

For more information, visit DoanTrevor.com, or call (505) 890-0368, 10am-5pm M-F.

Doan Trevor RifleBuilding
4119 Lanceleaf Ct NW
Albuquerque, NM 87114
505-890-0368

Permalink - Articles, Gunsmithing 2 Comments »
September 21st, 2015

Sako Extractor Mod for Rem-Action 6mmBR Tubegun

Sako Extractor Remington bolt

Jonathan Ocab, a High Power shooter from California, had gunsmith Doan Trevor install a Sako-style extractor in the Rem 700 bolt in Ocab’s 6mmBR Eliseo R5 tubegun. Jonathan produced an excellent video showing how the Sako extractor improves the ejection of the short, fat 6mmBR cartridges in his rifle. Jonathan’s video demonstrates 6mmBR case ejection with an unmodified Rem 700 factory bolt versus a factory bolt fitted with a Sako-style extractor.

Johnathan explains: “Note how even when slowly operating the bolt, the bolt with the Sako extractor easily ‘kicks’ out the brass on ejection with minimal chance of operator error resulting in a failure to extract. While the unmodified bolt has issues ejecting brass on slow operation, it will eject if the operator pulls the bolt back quickly (fast and with some force).

While a Sako-style extractor isn’t an absolute necessity, this video shows the definite improvement this modification provides. For short cartridges like the 6mmBR, this is very useful. This modification is highly recommended for competition shooters, especially High Power competitors who seek improved function in rapid-fire stages. This modification is fairly inexpensive and any competent gunsmith should be able to perform the work (usually under $100 with parts and labor).”

EDITOR’s NOTE: In his video, Jonathan deliberately worked the unmodified Remington bolt slowly to show how the standard Rem extractor can struggle with short fat cases like the 6mmBR. In fact, when you work a standard, unmodified bolt more quickly, the extraction can be much more positive. Cycling the bolt with more “snap” provides more energy to eject the cases. We have run an R5 Tubegun chambered in 6mmBR with an unmodified Rem 700 bolt (no SAKO extractor), and the extraction was reliable, provided the bolt was worked quickly.

Permalink Gunsmithing, Tech Tip 4 Comments »
December 24th, 2014

Labors of Love — Doan Trevor, Master Gun-Builder

We recently featured the “Hornady Number One”, a showcase rifle featureing a CAD-designed, machine-cut stock. While many viewers liked that one-of-a-kind Hornady rifle, others lamented the absence of hand-shaped curves on the Hornady’s angular stock. So, for fans of curvy, hand-crafted rifles, we’re presenting this homage to a truly great stock-maker, Doan Trevor, an artist in the old style.

Doan Trevor is a master gunsmith and stock-maker who works in the old style. He still hand-crafts stocks from start to finish, and does all the metal-work on the custom rifles he builds. Starting with highly-figured woods, Doan carves and shapes his stocks largely by hand, with meticulous attention to detail. Each rifle he builds is optimized for its intended discipline, and custom-fitted for the customer.

Doan Trevor

Doan Trevor Customer Gunsmithing

With the help of his talented wife Sue (who does the photography and builds the web pages), Doan has created a wonderful website, DoanTrevor.com, that is a feast for the eyes. You can see beautiful wood-stocked rifles being hand-crafted. Doan also illustrates how he creates custom metal parts, and how he beds barreled actions into the finished stocks.

Doan Trevor Customer Gunsmithing

Doan Trevor Customer Gunsmithing
Doan Trevor Customer Gunsmithing

Set aside a few minutes and visit Doan’s website. Be sure to click on the site’s secondary pages: Rifle Building, Woodworking, and Metalworking. You’ll find dozens of high-quality photos and fascinating information on gun-building.

Doan Trevor Customer Gunsmithing

For more information, visit DoanTrevor.com, or call (505) 890-0368, 10am-5pm M-F.

Doan Trevor RifleBuilding
4119 Lanceleaf Ct NW
Albuquerque, NM 87114
505-890-0368

Permalink Gunsmithing, News 3 Comments »
December 2nd, 2012

Doan Trevor — An Artist with Wood and Metal

Doan Trevor is a master gunsmith and stock-maker who works in the old style. He still hand-crafts stocks from start to finish, and does all the metal-work on the custom rifles he builds. Starting with highly-figured woods, Doan carves and shapes his stocks largely by hand, with meticulous attention to detail. Each rifle he builds is optimized for its intended discipline, and custom-fitted for the customer.

Doan Trevor

Doan Trevor Customer Gunsmithing

With the help of his talented wife Sue (who does the photography and builds the web pages), Doan has created a wonderful website, DoanTrevor.com, that is a feast for the eyes. You can see beautiful wood-stocked rifles being hand-crafted. Doan also illustrates how he creates custom metal parts, and how he beds barreled actions into the finished stocks.

Doan Trevor Customer Gunsmithing

Doan Trevor Customer Gunsmithing
Doan Trevor Customer Gunsmithing

Set aside a few minutes and visit Doan’s website. Be sure to click on the site’s secondary pages: Rifle Building, Woodworking, and Metalworking. You’ll find dozens of high-quality photos and fascinating information on gun-building.

Doan Trevor Customer Gunsmithing

For more information, visit DoanTrevor.com, or call (505) 890-0368, 10am-5pm M-F.

Permalink Gunsmithing, News 5 Comments »
August 23rd, 2011

Tuff 1 Rubberized Grip Sleeves Work on Rifles and Pistols

The Tuff 1 Grip Cover is a simple new accessory that may benefit tubegun shooters, AR owners, and pistol enthusiasts. Tuff 1 Grip Covers are made from a proprietary, grippy rubberized material that can stretch up to 200%. This elasticity allows the covers to easily fit all revolvers, semi-autos, and rifle or shotgun pistol grips. As you’d expect, Tuff 1 grip covers give you a more secure hold. Importantly, the material also helps absorb recoil (though not as much as Hogue grips). When fitted over a standard, hard-plastic AR grip, the Tuff 1 sleeve definitely provides a more comfortable, “high-traction” feel in the hand. On semi-auto pistols, Tuff 1 grip covers give a secure hold without the rough feel you get with stick-on skateboard tape.

Boa or Bad-Ass
Three surface patterns and four colors (Black, Olive Drab, Desert Tan, Hot Pink) are offered. We prefer the raised button “Boa Snake” pattern, but there is also a grid pattern with raised lines, and a skull pattern, for those “bad-ass” types. The $16.95 MSRP is the same for all colors and surface patterns. You can order from major vendors or directly from the Tuff 1 Online Store.

Tuff1 pistol grip

The one-size-fits-all Tuff 1 grip covers are easy to install. Simply roll the rubberized grip up like a sock, place it on the grip, then unroll it. (Watch installation video below). The Tuff 1 covers can be just as easily removed without harming the rubber.

Useful Product — But Consider Other Options
If you sweat a lot or shoot in wet climates, Tuff 1 grip covers provide a simple, low-cost upgrade. A Tuff 1 grip sleeve does markedly enhance the standard plastic AR15 pistol grip, which is hard, and slippery when wet. But then, for not much more money, you can select among a half-dozen or more aftermarket AR grips which will probably fit your hand better AND provide more cushioning.

For wood-handled wheelguns, we like the Tuff 1 covers in Boa or ‘Double-Cross’ pattern. The Tuff 1 grip sleeves provide better “traction” and cushion the hand a bit without changing grip geometry or making the grip overly thick in your hand. For a tubegun, we prefer the feel and ergonomics of a wood grip, such as those crafted by Doan Trevor (photo at right). These cost $75.00 from DoanTrevor.com or CompetitionShootingStuff.com. For $175.00, Doan also offers fully customized stippled grips, fitted to the shooter’s hand, and finished in satin or gloss.

Permalink New Product No Comments »