March 18th, 2019

Tactical Rimfire — Vudoo Gunworks V-22 Review by 6.5 Guys

.22 LR 22LR Vudoo Gunworks Rimfire V-22 6.5 Guys Ed Mobley

In this Gear Update the 6.5 Guys take a look at the Vudoo Gun Works V-22 rimfire repeater rifle. The action has the same footprint as a Remington 700 so it is compatible with a wide variety of Rem 700 chassis, triggers, and rifle accessories. This allows you to have a rimfire trainer with near-identical ergonomics as your centerfire match rifle. Rimfire training provides valuable trigger time with dramatically lower ammo costs. Additional magazines for this rifle system are available from Vudoo Gun Works for $39.95. Vudoo also sells many other products and accessories through its website: VudooGunworks.com.

Why Train with a .22 LR Rimfire Rig?
Frequent practice, particularly live fire sessions with your match rifle, is the standard prescription for success in the PRS/NRL game. However the cost of shooting thousands of rounds of ammo and the inevitable wear on precision rifle barrels can become cost-prohibitive. Rimfire training allows needed trigger-time while conserving precious centerfire barrel life. Rimfire cost per round might be 12 cents compared to 80 cents (or more) for centerfire.

The Vudoo Gun Works V-22 rimfire repeater action, arguably one of the best tactical rimfire actions available, owes its lineage to the respected Remington 40X action. Many rimfire matches have been won with 40X actions, so we understand why Vudoo chose that design for a starting point. Vudoo then added some important enhancements.

Seen at the WSC: Vudoo Gunworks Tactical .22 LR Rimfire Rifles
The 2017 NRA World Shooting Championship (WSC) included a side-match featuring Vudoo Gunworks .22 LR rimfire tactical rigs. Shooters were impressed with the V-22 rifle, which looks and feels like a centerfire rig, but with a rimfire repeater action running full-size mags.

Vudoo states: “Our V-22 also runs a full-size short action bottom metal (DBM) and our V-2210 magazine has a [full-size] AICS form factor. The V-22 is the only controlled-round-feed .22 LR receiver out there. The bolt has full capture control of the cartridge from the time it leaves the magazine until it ejects the spent round out the ejection port.” That means the round never touches anything during feed travel so the bullets won’t be nicked/dented during rapid cycling.

World Shooting Championship Vudoo Gunworks Rimfire

This very thorough video explains how to clean a .22 LR Vudoo Rifle:

Permalink - Videos, Competition, Gear Review, Tactical 12 Comments »
February 18th, 2019

SHOT Show — 6.5 Guys Reveal New Rifles and Chassis Systems

65guys.com Ed Mobley Steve Lawrence Scope Optics SHOT Show Videos modular driven accuracy international seekins precision Tactical Long Range 2019

Every year our friends Ed and Steve, aka the 6.5 Guys, produce informative SHOT Show videos. These two hard-working dudes visited dozens of product booths during SHOT Show 2019, producing over 40 video interviews for 65Guys.com. Ed and Steve roamed the Expo Center finding the latest and greatest rifles, stocks, optics, and accessories. Here are five 6.5 Guys Videos about new rifles and chassis systems. Next week we’ll feature more 6.5 Guys videos covering new optics. You can see all 42 SHOT Show 2019 videos from Ed and Steve on the 6.5 Guys YouTube Channel.

Modular Driven Technologies

modular driven ACC chassis

Modular Driven Technologies (MDT) produces impressive chassis systems with innovative features, including modular weights. MDT is now a top choice for the PRS/NRL tactical disciplines. Steve was quite impressed by the new MDT ACC. See more at MDTTac.com.

Accuracy International — Mile High Shooting Accessories

One of the most impressive rifles at SHOT Show 2019 was the massive Accuracy Int’l Advanced Sniper Rifle (ASR) at the Mile High Shooting Accessories booth. The Advanced Sniper Rifle (ASR) will be submitted for SOCOM’s multi-caliber rifle program. It is offered in a $19,544 deployment kit with three barrels: (.308 Win, .300 Norma Mag, and .338 Norma Mag).

Seekins Precision — Complete Rifles and Actions

2019 shot show 6.5 Guys chassis system rifles

Seekins Precision showcased some impressive custom actions plus complete rifles for both tactical competitors and long range hunters. We were impressed with the build quality of the Seekins precision rifles. We liked the new Seekins Havak Bravo, and the Seekins action has some interesting features, such as four locking lugs with 90° bolt throw. Full Seekins Havak Bravo Review.

Gunwerks — Long Range Precision Rifles

Gunwerks is more than a builder of expensive (some say over-priced) rifles. It also sells branded electro-optics, and suppressors. Gunwerks also runs shooting clinics, and has hundreds of training and hunting videos on the Gunwerks YouTube channel. We like what Gunwerks is doing in the media space. Here the 6.5 Guys showcase some of the latest rifle and stock options from Gunwerks. Steve said he liked the adjustability and ergonomics on the Gunwerks stocks.

Legacy Sports International (Howa)

Legacy Sports Int’l (LSI) offers a variety of hunting and tactical rifles featuring the smooth-running Howa actions from Japan. At SHOT Show 2019, Legacy previewed a new tactical rig featuring a modular MDT Oryx chassis and Howa 1500 barreled action. The 6.5 Guys got to shoot this rig during media day and were impressed. This will be offered for Howa Short, Long, and Mini Actions.

2019 shot show 6.5 Guys chassis system rifles

Permalink - Videos, Gear Review, New Product, News, Tactical No Comments »
February 13th, 2018

Through the Looking Glass — 6.5 Guys Review New Optics

New Optics scopes Nikon Revic LRF rangefinder

In the highly competitive optics market, technology is always advancing. This year, we’ve seen some significant innovations in high-end scopes, plus improved features in more affordable, sub-$1000 optics. The new American-made Revic PMR 428 scope features a built-in ballistic calculator employing a micro-processor and multiple on-board sensors. This really represents a major step forward in “smart” optics. Fans of high-technology should check it out. Or, if value is paramount, for less than one-third of the price of the Revic, you can get a new Nikon FX1000 series scope. The 6-24x50mm model offers very impressive features for under $800 — a bargain these days.

Revic Optics Scope Has Built-In Computer and Ballistics Solver

New Optics scopes Nikon Revic LRF rangefinder

New Optics scopes Nikon Revic LRF rangefinder

Ever wish your riflescope could calculate windage and elevation and display the shooting solution directly in the scope image? Well check this out — the new Revic PMR 428 scope is one of the most advanced optics ever offered to the public. The Revic has a micro-processor inside, plus sensors for temperature, air pressure, incline and cant (around bore axis). After the shooter inputs wind speed and direction, this allows the scope itself to indicate the correct windage and elevation corrections, plus adjust for shot angle. This really is a Big Deal, and we expect other top-end optics makers to follow suit in the years ahead. Right now Revic offers one 4-28x56mm PMR 428 Smart Scope for $2750.00. In this video, Steve Lawrence of 65Guys.com reviews the capabilities of the ground-breaking Revic PMR 428.

Impressive New Products from Nikon at Great Prices

New Optics scopes Nikon Revic LRF rangefinder

Jeremy Bentham, a Precision Rifle Series competitor, joined Nikon a year ago as a marketing manager. With his help, Nikon is making inroads into the Precision Rifle market with impressive products at very competitive prices. Here Steve chats with Jeremy about the latest offerings from Nikon, which recently celebrated its 100-year Anniversary. Jeremy presents Nikon’s new products for the tactical/practical market: 1) Stabilized Laser Rangefinder; 2) All-New FX1000 Tactical Scopes in 4-16X and 6-24X, with both MIL and MOA versions and optional illumination. The rangefinder is impressive — it eliminates 80% of perceived shake and also offers built-in angle compensation plus extended ranging capability. The new scopes are priced attractively — under $800. Bentham designed the new reticles which are clear and easy-to-use. These optics feature “high-speed” turrets (10 Mil or 25 MOA) with nice, tactile clicks. The 4-16x50mm model is $649.95 while the 6-24x50mm is $799.95 MSRP. These represent outstanding value for a big name, life-time warranty product.

U.S. Optics Offers B17 and B25 Scopes for Tactical Applications

The 6.5 Guys also checked out the new products from U.S. Optics. For 2018, U.S. Optics is featuring two impressive tactical scopes, the B17 and B25. Ed Mobley of 65Guys.com talks with Jake Vibbert of U.S. Optics. Jake explains that his company offers a wide variety of options, with both MOA- and Mil-based reticles. The B17 and B25 both feature a 34mm main tube, which helps deliver greater elevation adjustment. These B-series scopes offer a fast-focus eyepiece, and a true “tool-less” zero-set option. That’s a nice feature — you don’t have to find an Allen wrench in the middle of a competition.

Permalink - Videos, Gear Review, Optics 3 Comments »
December 29th, 2017

BYOB — Build Your Own Barricade (for Tactical Training)

6.5 Guys Ed Mobley Steve Lawrence

Here’s a great Do-It-Yourself project for tactical shooters. Ed and Steve of the 65Guys.com have created a versatile wooden barricade designed for easy transport. The goal with this design was to create a stable barricade that offers a variety of shooting positions, but can also fit in the bed of a pick-up or the back of an SUV. The 69″ tall barricade is hinged in the middle, so it’s just 27″ wide. To deploy the Barricade you simply fold it open and then nest the lower wings in ground-level stands.

We call this the BYOB Project — Build Your Own Barricade. Anyone with basic wood-working skills should find the Barricade prettyeasy to make. The only tricky part is cutting the side Dado joints for the left and right lower wings. But when you’ve got it completed, you have a low-cost unit that is versatile and sturdy yet easy to pack in a truck and carry out on the range. In the video below the 6.5 Guys showcase their Gen 2 barricade and explain how to build one just like it.

Looking at the 6.5 Guys Modular Barricade
The Modular Barricade was drawn up by Steve in PowerPoint and then dimensions added. Once the entire plan was created, Steve cut components to size and then used ordinary wood screws and wood glue to assemble the barricade frame. This was done to ensure maximum rigidity due to the light weight construction using 2″ x 2″ frame members. A long piano hinge was used to allow the Barricade to fold in half, while still having high torsional rigidity. Each of the Barricade openings are 12″ x 12″ square. This consistent ‘window’ spacing allows interchangeable panels with different cut-out shapes to be placed at varies heights/locations in the Barricade.

Modular Barricade Key Features
— Lightweight construction using low-cost 2×2 wood beams.
— Collapsible frame with center hinges for easy transport and deployment.
— Multiple Support levels at 6″ vertical intervals (6″ variance R to L).
— Modular port design allows ports to be changed and moved as desired.

6.5 Guys Ed Mobley Steve Lawrence


CLICK HERE to Download 6.5 Guys Barricade Plans PDF »

6.5 Guys’ Modular Barricade — Construction Tips
The Modular Barricade can be constructed over a weekend with the proper materials and basic shop tools such as a power saw and electric screwdriver. Steve used a router for the side panel dado joints but a table saw could also be used for that task. Steve’s only real issue with the build involved the port panels — getting them to fit right. The 2″ x 2″ frame wood wasn’t always straight; even a small variation in the wood could cause a port panel to be too tight or too loose. Steve had to do a lot of extra sanding and planing to get the port panels to fit just right.

Where and How to Use the Barricade for Training
Because the 6.5 Guys’ Modular Barricade is so easy to move, you can simply pack it up and deploy it at your local range for practice. (Do ensure club/range rules allow shooting from barricades.) While the Barricade is designed to sit on the natural ground, the base stands can also be placed on concrete if your range does not allow deployment forward of the normal firing line. While you can use the Barricade for training on your own, Ed and Steve say novice shooters can benefit from a formal clinic.

In the video below, the 6.5 Guys discuss precision rifle training with Scott Satterlee, an instructor with Core Shooting Solutions. This video explains why new shooters should consider enrolling in a formal training clinic. Topics covered are: typical course format and “curriculum”, the gear needed to participate in a precision rifle clinic, and skills shooters should practice before attending the clinic.

Permalink - Articles, Tactical, Tech Tip No Comments »
October 12th, 2017

Getting Started in Precision Rifle Matches (Practical/Tactical)

65 Guys Ed Mobley Steve Lawrence PRS Precision Rifle Series Competition Tips

Our friends, Ed Mobley and Steve Lawrence, aka the “6.5 Guys”, have written an excellent article on getting started in practical/tactical competition. If you are new to the game, these tips can help you save money, progress faster, and have more fun. Here are article highlights, but we recommend you read the full story, 5 Tips for Attending Your First Precision Rifle Match, on www.65guys.com.

We often meet people who are new to long range precision shooting, and want to improve their knowledge and skill level. However, they aren’t sure if they are ready to sign up to compete in a match. They often ask, “What knowledge or skills are necessary to compete in a match?” Others may state, “I need to purchase this gear or that gear before I can attend a match”. For those guys who have a strong interest in precision rifle shooting, and who wish to chec out a precision rifle match, below are Five Tips to make it a positive experience.

TIP ONE: Make Plans and Commit to Go

First you need to start by finding a match to attend. This may entail a little bit of research and investigative work on your part to find what matches are scheduled in the next few months. We recommend starting with any match that may be within a reasonable driving distance. This may likely be a local “club” match, many of which are held on a regular basis. These make great venues because it will provide an opportunity to meet some of the regular attendees as well as shooters that are from your geographic area. Additionally, most of the smaller matches are a little more relaxed in terms of level of competitiveness.

Once you decide on the match you want to attend, do your homework. This means finding out if you need to pre-register or pre-pay the match fee. Commit to going by registering for the match and putting it on your schedule. Be sure to find other useful information for questions such as:

— What time should I arrive?
— Is there a mandatory safety briefing for new shooters at that venue?
— What is the travel time required to get to the match site?
— How many stages will there be?
— Is there a description of the stages available before the match?
— How many rounds should you bring?
— Are there special equipment requirements? (E.g. do you need chamber flags, is there a pistol stage?)

65 Guys Ed Mobley Steve Lawrence PRS Precision Rifle Series Competition Tips

TIP TWO: Bring What You Have

(Don’t Spend a Fortune at the Start)
Some new shooters often assume they need a custom match rifle or all of the miscellaneous shooting gear associated with long range precision shooting to compete in match. While having a Kestrel weather meter and a high quality laser range finder and other shooting accoutrements are invaluable kit, you will find other shooters at your first match that will provide you with the information and coaching you need to get on target.

In fact, the only gear you really need to bring is a scoped rifle with a bipod and ammo capable of consistently shooting within one MOA. Also, be sure to know the ballistic drops or have a ballistic drop table prepared for your rifle/ammo to dial the correct DOPE on your scope for different target ranges. Many of the other participants at the match will be willing to let you borrow a support bag, bipod, tripod or other gear if you need one — just ask. Don’t use the excuse of not having the right gear to delay getting out to a match!

One reason not to make a big initial investment in a new rifle and assorted gear before competing, is we’ve seen a number of people come into the sport and try it for a year and then make the decision to move on to something else.

TIP THREE: Be Prepared to Learn

As a new shooter at a match, there is no better opportunity to learn. We often look to our local club matches as a group ‘training’ session to prepare for the bigger matches. You will find competitors at all levels of skill and many of your fellow shooters will enthusiastically provide helpful advice once they learn you are new to the sport. Take advantage of the opportunity to ask questions if you would like ideas for how to engage a stage, but also be sure to do more listening than talking as you receive guidance and tips from more experienced competitors.

Watch and observe other shooters and how they approach and ‘game’ a specific stage or course of fire. You’ll begin to recognize which shooting positions work best for different scenarios, and maybe even come up with some new ones that no one has thought of before.

Seeing what the better shooters do is an invaluable instructional tool. You can use your smart phone’s video camera to record other shooters (with their permission). When you’re ready to shoot, ask another shooter to record your performance. Watching yourself will point out needed areas of improvement.

65 Guys Ed Mobley Steve Lawrence PRS Precision Rifle Series Competition Tips

After each match conduct an informal after action review and summarize for yourself the things that went well and what you should continue to do. You should also identify the specific shooting skills you should develop and make a plan to integrate the appropriate practice drills into your practice sessions. Finally, if you maintain a shooter’s data book or journal you’ll want to note things such as:

After Action Review – How you did, what went well, things you need to work on in practice.
Stage Observations – Successful methods used for specific courses of fire. Note barricades, positions used, specific gear used for stages.
Gear Observations – How your rifle/gear performed, what new items you should add to your “buy list”.

TIP FOUR: Be Safe and Have Fun

You’ve all heard a parent or teacher say, “It’s all fun and games until someone loses an eye.” The same can be said of the shooting sports. Safe handling of firearms is the number one rule at any match, and comes before the FUN part in terms of importance.

Before all matches start there will always be some form of a mandatory safety briefing. Make sure you know, understand, and follow any unique safety protocols for the match you attend. Some matches require all rifles have chamber flags inserted and are stowed in bags/cases while not on the firing line — other matches may not. If you run afoul of any safety rules, you risk the chance of being disqualified from a stage or worse, the entire match.

65 Guys Ed Mobley Steve Lawrence PRS Precision Rifle Series Competition Tips

The second rule is simply have fun. This starts with having a good attitude throughout the day. Keep in mind that as a new competitor you should think of a match as a solid day of practice and training. If you blow a stage, use it as an opportunity to diagnose what you could have done differently or what you need to improve on — then smile and drive on.

Any day at the range or shooting is a good day. A match is an opportunity to hang out with like-minded people who are passionate about shooting and impacting targets far-far away. Life is great when you are doing what you enjoy!

TIP FIVE: Make Friends

There is no better way to meet lots of precision rifle shooters and make friends than at a match. The people that attend the tactical precision matches on a regular basis are those that have ‘fallen into the deep end of the pool’ and are really into the sport. As a result, they have become part of the local precision shooting community. As you strike up conversations at the match, find out if your new-found friends visit specific forum boards or social media outlets, or if there are other matches they attend.

Precision shooters tend to congregate and share information in different corners of the Internet. It will serve you well to meet some of the guys in person at matches and be able to connect a face to a screen name. As you develop your friendships and develop a level of trust, you will find opportunities become available to shoot with others in your local area, or get ‘read-in’ on a secret honey-hole of a spot to shoot long distance. Additionally, the local shooting community will often find it more convenient to sell or trade gear and equipment locally than deal with buyers/sellers that are out of state.

>> CLICK HERE to READ FULL ARTICLE on 65Guys.com

Permalink - Articles, Competition, Tactical No Comments »
July 30th, 2017

Howa Mini Action Rifles Reviewed by 6.5 Guys

Howa Mini Action Rifle 6.5 Guys 65guys.com Legacy Sports 6.5 Grendel 7.62x39

We’ve been fans of the Howa Mini Action rifles since they were introduced a couple years ago. With actions that are nearly an inch shorter than typical “short actions”, these Mini Action rigs work great as a compact “truck gun” or carry-around varminter. Current chamberings are: .204 Ruger, .222 Rem, .223 Rem, 6.5 Grendel, and 7.62×39. There are 20″ lightweight, 20″ heavy contour, and 22″ standard contour barrel options.

6.5 Guy Ed Mobley Tests the 7.62×39 Howa Mini Action Rifle
Howa Mini Action Rifle 6.5 Guys 65guys.com Legacy Sports 6.5 Grendel 7.62x39

The Howa Mini Action rifles come with the excellent HACT 2-stage trigger and a 5-round or 10-round, synthetic detachable box mag (depending on caliber). The Mini Action’s bolt is 13% shorter than on regular short actions, providing a shorter, faster bolt throw. Weight is also reduced. This makes for a nice, compact (and very shootable) package.

6.5 Guys Test Howa Mini Actions in 6.5 Grendel and 7.62×39

The 6.5 Guys recently secured a pair of Howa Mini Actions, one chambered in 6.5 Grendel and the other in 7.62×39 Russian: “After trying out the Howa Mini Action rifles at SHOT Show 2017, we got a couple of loaners in 6.5 Grendel and 7.62×39 courtesy of Legacy Sports. These rifles are known for their smooth cycling and lightweight actions, as well as some unique chamberings for bolt rifles (6.5 Grendel, 7.62×39). Long story short, we really enjoyed them.” In fact Steve liked his 6.5 Grendel enough that he plans to purchase the gun. Get the full scoop in this VIDEO REVIEW:

The folks at Legacy Sports also conducted extensive accuracy tests of commercial ammunition in 6.5 Grendel and 7.62×39. The most accurate 6.5 Grendel ammo, with a stunning 0.29″ group, was Alexander Arms with Lapua 123gr Scenar; second best (0.56″ group) was Hornady with 123gr A-Max bullet. The most accurate 7.62×39 ammo was Hornady 123gr SST with a 0.62″ group in the 20″ Heavy Barrel version. View Howa’s Test Reports with these links:

6.5 Grendel Factory Ammo Data | 7.62×39mm Factory Ammo Data

Howa Mini Action Rifle 6.5 Guys 65guys.com Legacy Sports 6.5 Grendel 7.62x39
Click HERE for full-screen image.

Permalink - Videos, Gear Review, Hunting/Varminting No Comments »