September 20th, 2011

New Detailed Photos of Carlos Gonzales’ Benchrest Speed-Feeder

This past weekend we reported that the NBRSA approved the use of the Gonzales cartridge feeder in registered benchrest matches. This device, supported by an arm attached to the front rest, holds 6PPC cartridges close to the loading port on the left side of the action. Using a remote (red) cable activated by the left hand, the cartridge feeder drops one cartridge at a time directly into the action. Now, thanks to Rick Pollock of Benchrest.ca, we can show you close-up photos of the device, so you can see how it is positioned and supported. Note that the Gonzales device does not touch the gun.

Carlos Gonzales Benchrest Magazine Feeder
Carlos Gonzales Benchrest Magazine Feeder
Carlos Gonzales Benchrest Magazine Feeder

Watch Video to See Speed-Feeder in Action
The cases are gravity-fed, but the shooter has positive control over feeding. A cable with a push-button control runs from the magazine down to the rear foot of the pedestal rest. You just push the button to drop one cartridge from the magazine. Watch the video below to see how it works:

Photos courtesy Rick Pollock, Benchrest.ca.