November 1st, 2016

Applied Ballistics Library Updates and November Seminar in NC

Applied Ballistics Custom Drag Models G1 G7 Nosler RDF

Nosler recently introduced a new series of high-BC bullets with factory-closed meplats. Bryan Litz’s team at Applied Ballistics is now testing these new Reduced Drag Factor (RDF) projectiles to determine their performance — and specifically to see if the BCs are as high as claimed. Nosler bullet testing is underway this week and Litz hopes to bring the results to the Applied Ballistics Seminar in North Carolina later this week (November 3-4, 2016).

Applied Ballistics Seminar Fall 2016: November 3 – 4, 2016 – Caraway Conference Center
4756 Caraway Mountain Road Sophia, NC 27350; Phone: (336) 629-2374. Seminar Sign-Up.

Bryan notes: “If you live in the Southeast region, this is the last seminar for you for at least a year, possibly longer. We will most likely do the next seminars in regions not yet visited.”

Applied Ballistics Library Update
Bryan Litz is hard at work testing new projectiles: “We are currently in the middle of testing all these new offerings that have recently come out. In fact, the lab is up and running today, with some of the new Nosler RDFs going down range. Bullet measurements have been taken with our state-of-the-art digital comparator which is accurate to within 0.0001″. For example, shown below are the measured dimensions for the new Nosler RDF .308 175 grain projectile. For these new bullets, we will not only have complete BC measurements accurate to ± 1%, but we will have Custom Drag Models (CDMs) coming as well.”

Applied Ballistics Custom Drag Models G1 G7 Nosler RDF

New Data Coming Soon
Bryan hopes to present the new Nosler data at the Seminar this week in North Carolina. In addition, Bryan is developing information for the Hornady ELD bullets, G9 Competition Series solid bullets, some new Sierras, and some other projectiles not currently in the library: “Once we complete testing on all these new offerings, we will then compile the library for the next library update (which will be done across all platforms). We want to make sure that none of these new offerings are left out. For those who want to see some of the early results, come join us at this final seminar of 2016!”

Custom Drag Models
Applied Ballistics has been providing custom drag models for use in trajectory prediction for the past several years. Custom Drag Models (CDMs) for bullets are a more refined way of modeling drag for bullets because you’re not referencing a standard like G1 or G7, rather you’re using the actual measured drag of a specific bullet in a ballistic solver. This results in more accurate trajectory predictions, especially through transonic.

Applied Ballistics Custom Drag Models G1 G7 Nosler RDF