January 25th, 2015

New Flameless Induction (Electrical) Annealer from Giraud

Giraud Tool Fluxeon Induction Electrical annealer annealing machine cartridge brass Lapua flame torch
Click Photo for full screen view of machine.

Forget flames — induction may be the future of cartridge annealing. Induction heating, using an electrical current passing through a coil, can be controlled with great precision (you can dial in the “dwell time” to a small fraction of a second). With a high-wattage power source, induction annealing is also very fast. A cartridge case can be done in two seconds or less. Combine that with an automatic case feeding system and you have a true assembly-line process capable of cranking out hundreds of precision-annealed cases per hour. Sound too good to be true? Well Giraud Tool recently announced its new Electro-Induction cartridge annealing system. This combines Giraud’s proven hopper-type case feeding system with a powerful Fluxeon Annealer. Watch the video below to see how it works.

Watch Giraud Induction Annealer Batch-Process Cases (900+ cases/hour)

Including case-shuttle time, a case is annealed and processed approximately every 4 seconds (rate based on the video demonstration). At that rate, if you keep the hopper full, you could anneal over 900 cases per hour. Even if you don’t need that production capacity, this system allows unattended annealing of your cartridge brass while you do other tasks — such as weighing powder charges or seating bullets.

We know some of you guys are now thinking “OK — I want one. What’s it going to cost?” Giraud has not listed a price yet for a complete induction annealing system. Giraud’s torch-equipped, hopper-fed annealing rig starts at $470.00. We expect that integrating the “Annie” induction unit by Fluxeon will add $500 to the price. By itself, the “Annie” induction annealer costs $449.00 on Fluxeon’s online store. But that $449.00 Fluxeon price does not include long-reach cables and adapters for the hopper feed.

Giraud Tool Fluxeon Induction Electrical annealer annealing machine cartridge brass Lapua flame torch

Story Tip by EdLongrange. We welcome reader submissions.
Permalink Gear Review, New Product 10 Comments »
August 13th, 2014

New Giraud Case-Trimming and Chamfering Tool

Giraud Tool has a new case trimmer/chamferer that works with a power drill (or other power source). Giraud’s patent-pending Tri Way Case Trimmer is a self-contained unit powered by your drill or motor. Using a sharp carbide blade it will trim your cases to length, deburr, and cut both inside and outside chamfers — all in one pass. That’s pretty impressive for a $90 tool that fits in the palm of your hand.

Close-up of the Tri Way cutter with clear plastic chip guard removed.
Giraud Tri Way Trimmer Case Cutter tool

Product Features
1. Fully adjustable for cartridge length (and depth of chamfer).
2. Tool includes carbide blade that cuts a 15° inside case mouth chamfer and 45° outside chamfer.
3. Case holder supported by sealed ball bearing raceway.
4. Tool includes removable, transparent plastic chip guard.
5. Tool can work in any orientation (vertical, horizontal, or any angle).

The Giraud Tri Way Trimmer is designed to be powered by a portable hand drill, drill press, or other dedicated rotating power source. The tool indexes off the shoulder of your cases, but the blade adjusts so that cartridge overall length (COAL) can be controlled with precision. Constructed out of 6061-T6 aluminum and 303 stainless steel, the Tri Way tool should last a lifetime. Note: This tool is not universal. The Tri Way is dedicated to a single cartridge and “related” cartridges with similar body dimensions. Thus you need a specific tool for each cartridge family. For example, the .308 Win tool will also trim .243 Win, .260 Rem, and 7mm-08.

Cartridge Sizes Available for Giraud Tri Way Trimmer:
.223 Remington (Also trims .17 Remington, .204 Ruger, .222 Remington, .222 Remington Magnum)
7.62 x 39mm (Russian)
.300 Blackout (Also trims .17 Rem Fireball, .221 Fireball)
.308 Winchester (Also trims .243 Winchester, .260 Remington, 7mm-08)
.30-06 Springfield (Also trims .25-06, .270 Winchester, .280 Remington)
.300 Winchester Mag (Also trims .264 Winchester Magnum, 7mm Remington Magnum)

Giraud Tri Way Trimmer Case Cutter tool

Product Tip from EdLongrange. We welcome reader submissions.
Permalink New Product, Reloading 4 Comments »
May 14th, 2012

Specialized Products for 50 BMG Shooters

Alliant 50 BMG PowderAlliant’s Powder for 50-Caliber Applications
In 2009 Alliant unveiled Reloder 50, a new powder designed for long-range, 50-caliber rifle shooters. According to Alliant, the burn rate is “a little slower than Winchester 860″ and the powder is showing excellent lot-to-lot consistency. Load density is optimized for the 50 BMG and similar cases. Like Reloder 17, Reloder 50 employs a process which penetrates the kernels with the burn-rate-controlling chemical. This should allow a longer, flatter pressure curve, yielding more velocity than conventional powders can deliver. Alliant says that Reloder 50 offers “superior velocity and the ability to burn cleaner (with less residue).” Reloder 50 comes in both 1-lb (#150527) and 8-lb (#150528) containers.

Giraud 50 BMG Case/Bullet Comparator
Giraud Tool makes a comparator for 50-Cal cartridges. The double-ended comparator is quite versatile. In one orientation you can measure base-to-ogive bullet length and also measure cartridge OAL from rim to bullet ogive. When reversed, you can use the comparator to measure cartridge headspace. The $30.00 Giraud 50 BMG Comparator gauge is constructed of 303 stainless and fits most any vernier, dial, or digital caliper. CLICK HERE for more info.

Giraud Tools 50 BMG comparator gauge

Lyman 50 BMG AccuTrimmer and Forster 50 BMG Trimmer
50 BMG enthusiasts asked for a reasonably-priced 50 BMG case trimmer and Lyman responded with an Accutrimmer designed specifically for that cartridge. Easy-to-use course and fine cut-length adjusters are positioned on the right side (by the handle). The shell head fits into a special holder which centers the case. The unit comes complete the 50-Caliber neck pilot. This case trimmer, including pilot, costs $59.99 at MidwayUSA.com.

Lyman 50 BMG AccuTrimmer

Forster Products also makes a dedicated 50 BMG trimmer. Forster’s cutter tip is much sharper than the cutter on the Lyman AccuTrimmer. However, with the Forster tool you will pay more for that superior cutting ability — Forster’s 50 BMG trimmer costs $92.95 at Sinclair International.

Forster 50 BMG case Trimmer

Permalink News, Reloading 3 Comments »