Eurooptic vortex burris nightforce sale




teslong borescope digital camera barrel monitor


As an Amazon Associate, this site earns a commission from Amazon sales.









July 1st, 2018

Lightweight Cleaning Cradles from PMA Tool

PMA Tool Cradle Benchrest

PMA Tool offers lightweight yet sturdy cleaning cradles that are handy, affordable, and easy to transport. PMA’s single-gun cradle, priced at $75.95, is ideal for benchrest rigs. It measures about 17″ in length and weighs about one pound. PMA now also offers a two-gun cradle for $119.95. Both single and double cradles secure your rifle(s) in a muzzle-down position that allows easy cleaning and prevents solvents from running back into the action. The front “saddle” and all contact surfaces are covered by thick silicone rubber padding which grips the rifle securely yet protects the stock and components from scratches.

PMA Tool Cradle Benchrest

These cradles are currently available either with a 3″-wide front saddle for Benchrest and F-Open style stocks, or a 2.5″-wide front saddle for rifles with narrower narrower, flat fore-ends such as those found on Hunter Class and modern varmint stocks.

Double Rifle Cradle is a Smart, Versatile Design
PMA’s double rifle cleaning cradle was was designed from the ground up to work perfectly for two rifles side-by-side. Using the same tie bar and protective saddles found on the single cradel, PMA widened the base and created new uprights to support the saddles, making the cradle as narrow and light as possible, while retaining all the protective and non-slip features from our single unit. This unit is available in double 3″ front saddles, double 2.5″ front saddles or combination 3″ / 2.5″ front saddle configurations to accommodate multiple classes of rifles for centerfire and rimfire benchrest competition.

Product Tip by EdLongrange. We welcome reader submissions.
Permalink Gear Review, New Product 1 Comment »
December 25th, 2017

BargainFinder 118: Deals of The Week Christmas Edition

Accurateshooter Bargain Finder Deals of Week

At the request of our readers, we provide select “Deals of the Week”. Every Monday morning we offer our Best Bargain selections. Here are some of the best deals on firearms, hardware, reloading components, optics, and shooting accessories. Be aware that sale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.

1. Amazon — Sightron 10-50x60mm SIII, as Low as $939.00

Sightron SIII 10-50x60 scope optic competition target dot mildot MOA riflescope sale

Need a high-magnification scope for long-range competition? Among quality scopes with 40+ power, we think the Sightron SIII 10-50x60mm scope is the best value on the market. These scopes are available through Amazon.com for under $940.00. That’s about half the price of a Leupold 7-42x56mm VX-6, and 40% of the cost of a Nightforce 15-55X competition model. The Sightron is a good product with a lifetime manufacturer’s warranty. And it works — at the 2017 IBS 600-yard Nationals, 4 of the Top 10 shooters (including the 2nd-place finisher) used Sightron 10-50X scopes. Though reasonably priced, this 10-50x60mm optic is definitely good enough to win long-range benchrest and F-Class matches.


MOA-2 Reticle

Target Dot Reticle

Fine X-Hair Reticle

Mil-Dot Reticle

NOTE: There are a variety of reticle options and both 1/4-MOA and 1/8-MOA click versions are offered. Read the product description carefully when ordering to be sure you’ve selected your preferred reticle type and click value.

2. Natchez — Special 5 Reloading Press Kit, $199.99

RCBS Special 5 Reloading Kit

Looking for a great holiday gift for a family member getting started in metallic cartridge reloading? This RCBS Kit has everything a new reloader needs: single-stage press, powder measure, scale, powder trickler, priming tool, cartridge tray, “rocket” chamfer tool, case lube and more. This is an excellent entry-level reloading kit, on sale for just $199.99 at Natchez Shooters Supplies. We like the relatively compact Special 5 press for most reloading duties. Eventually you may want to add an additional, large heavy press, but this will get the job done. For the combined package, with all the tools one needs to hand-load quality ammo — this is a stunningly good deal at $199.99. This also qualifies for an RCBS Rebate (see next item).

3. RCBS — 2017 Buy Green Get Green Rebate Program

RCBS Buy Green Rebate Program Sale Discount Deal

Act quickly — RCBS’s best rebate program of 2017 runs out at 11:59 pm on December 31st. The Holiday 2017 Buy Green Get Green promo is simple — buy ANY RCBS product over $49.99 and you qualify. There’s no restricted list of “qualifying” products. The more you spend, the more you get back — up to $175.00 total. If you are considering purchasing a single-stage press, electronic powder dispenser, progressive press, or a full reloading kit, save big with this promotion. It is good for purchases made through the end of the year, December 31, 2017. Download REBATE Form HERE.

4. PMA Tool — 10% Off Orders Plus Free Shipping

PMA Tool Micro Die Harrell's Reloading Tools 10% off free shipping

PMA Tool carries some of the very best products for precision reloaders. PMA offers Micro-Die Adjusters, superb case trimming tools, cleaning gear, as well as great products from Kelbly’s, Harrell’s Precision, and Lenzi. Right now you can save on a vast array of products PMA sells. The folks at PMA report: “The Christmas and New Year Holidays are here. Every once in a while it’s nice to give yourself a little something special. As a special thank you to you, our favorite customers, we are offering 10% off your entire order during the Holiday Season. Simply use the code YFVVB46UEWU upon checkout at pmatool.com to receive your 10% discount. We at PMA Tool are also offering FREE SHIPPING within the USA through the end of 2017.”

5. Brownells — Buy Revolver Get $100 Gift Card + $50 S&W Rebate

Brownells Smith Wesson Revolver Performance Center Gift Card Coupon Rebate $50 $100

This is the best promo we’ve ever seen for premium S&W revolvers. First you get a $100 Brownells Gift Card. In addition, Smith & Wesson provides a $50 Rebate in the form of a prepaid Visa Card. That’s $150.00 in value. Wait — it gets even better! On Christmas Day (’til 11:59 pm CST), use Brownells checkout code “NBE” to get another $50 off orders over $500. That’s $200.00 in total savings! (Or use code NBD to get $30 off orders over $300 — details HERE). This promo applies to over 50 different S&W revolvers, not just the ones in the graphic. SEE ALL Revolvers HERE.

Brownells Smith Wesson Revolver Performance Center Gift Card Coupon Rebate $50 $100

6. Amazon — Sig Kilo 1250 Laser Rangefinder, $222.21

AccurateShooter Deals of the Week Sig kilo lrf Laser Rangefinder compact hunting bargain

Every outdoorsman can use a good laser rangefinder. If you don’t have a quality, compact Laser Rangefinder, here’s a great deal. The 6x20mm SIG Kilo 1250 Camo Rangefinder is now on sale for $222.21 with free shipping. This is a very accurate LRF, that ranges deer-sized targets at long distances quickly. The scan mode is very fast (4X per second) and this offers both line of sight (LOS) or angle modified range (AMR). The unit is compact and light — a bonus for hunters. There are more expensive Laser Rangefinder that can range farther, but this $222 Kilo 1250 will definitely do the job on a hunting trip for one-third the price.

7. Midsouth — 10% Off All Sierra Bullets

AccurateShooter Deals of the Week Sierra MK MatchKing bullet Midsouth sale bargain

We’ve been impressed with recent offerings from Sierra Bullets. Many popular Sierra MatchKing bullet types now come “Pointed” from the factory. That pointing process uniforms the bullet tips, maintaining a more consistent Ballistic Coefficient (BC) among all the MatchKings in a box. That, in turn, can produce less vertical dispersion, because the bullet-to-bullet aerodynamic drag variance is signficantly reduced. We also like Sierra’s Varmint and Hunting bullets. Choose traditional bullets or tipped bullets — Sierra offers both types. Right now Midsouth is offering 10% off all Sierra rifle and pistol bullets in stock. Considering that Midsouth’s bullet prices were very competitive to begin with, this is a good deal.

8. CDNN Sports — HK 416 .22LR Rimfire Rifle, $389.88

AccurateShooter Deals of the Week .22LR rimfire discount HK 416 ar15 tactical rifle ammo sale bargain

If you are looking for an AR-type .22 LR rifle for cross-training and rimfire tactical matches, the HK 416 is a fine choice. Made by Walther under license, these HK 416 D145RS rimfire rifles are accurate and reliable. This is a good deal at $389.88. The HK 416 normally sells for $550.00 to $600.00. One purchaser writes: “Great .22. I have had this gun a couple of months and have put about 500 rounds of 5 different brands of ammo through it. Not one FTE. I have shot other brands that can’t get through one 30-round mag without a failure.” CLICK HERE for Product Details.

9. Grafs.com — Magnetospeed Sporter $178.99

Deals of Week RCBS Rock Chucker Supreme Kit

If you have been waiting to get a Magnetospeed… wait no longer. Priced at just $178.99 at Grafs.com, the Magnetospeed Sporter model costs less than half as much as Magnetospeed’s V3 models. This chronograph attaches directly to your barrel so you don’t have to go downrange to position tripods and set up skyscreens. For most people the Sporter Model contains all the features they need. Using Magnetospeed’s XFR adapter (sold separately), data can be transferred easily from the display module to your mobile device. This is also available from Amazon for $179.00 with free shipping. READ Magnetospeed Sporter Review.

10. Amazon — AR500 Steel 8″-Diameter Gong, $19.95 Delivered

Reactive Target AR500 Steel Gong Free Shipping 8 inch 8

We like reactive targets. It’s fun to “ring steel” and see a target move instantly when hit. For just twenty bucks (including shipping), it’s hard to go wrong with this 8″ AR500 Steel Gong. The 8″-diameter size is big enough for zeroing at 200 yards, yet offers a nice challenge at 500 yards and beyond. There is also a 6″-diameter model for just $14.00.

Permalink Bullets, Brass, Ammo, Handguns, Hot Deals, Optics, Reloading 3 Comments »
December 4th, 2017

Bargain Finder 115: AccurateShooter’s Deals of the Week

Accurateshooter Bargain Finder Deals of Week

At the request of our readers, we provide select “Deals of the Week”. Every Monday morning we offer our Best Bargain selections. Here are some of the best deals on firearms, hardware, reloading components, optics, and shooting accessories. Be aware that sale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.

1. Brownells — Breech Lock Reloading Kit $99.99 with Code M3P

Lee Challenger Brownells Reloading Kit

Here’s a great holiday gift for a friend or family member getting started in hand-loading. The Lee Breech Lock Challenger Reloading Kit includes Press (with quick change die system), Powder Measure, Scale, Priming Tool, Shell Holders, Reloading Tray, and Chamfer Tool. And you get all this for just $99.99 with discount code! Brownells’ current discounted Sale Price is $109.99, but you get $10.00 off with CODE M3P. That lowers your net cost to $99.99. Get the entire kit for under one hundred bucks. That’s a steal — this same kit sells for around $125.00 on Amazon.

2. PMA Tool — 10% Off Orders Plus Free Shipping

PMA Tool Micro Die Harrell's Reloading Tools 10% off free shipping

PMA Tool carries some of the very best products for precision reloaders. PMA offers Micro-Die Adjusters, superb case trimming tools, cleaning gear, as well as great products from Kelbly’s, Harrell’s Precision, and Lenzi. Right now you can save on a vast array of products PMA sells. The folks at PMA report: “The Christmas and New Year Holidays are here. Every once in a while it’s nice to give yourself a little something special. As a special thank you to you, our favorite customers, we are offering 10% off your entire order during the Holiday Season. Simply use the code YFVVB46UEWU upon checkout at pmatool.com to receive your 10% discount. We at PMA Tool are also offering FREE SHIPPING within the USA through the end of 2017.” Editor’s Note: PMA Tool carries many great products. If you are a serious benchrest or F-Class shooter, you should look carefully at PMA’s full product line. The Lenzi bags are superb for example, and PMA’s unique action cleaning tool is a perfect “stocking stuffer”.

3. CDNN Sports — Winchester XPR Rifle $279.99 after $100 Rebate

Winchester XPR Hunting Rifle Vias Camo CDNN Cabelas Rebate

Looking for a good hunting rifle at a great price? Check out this promotion for the Winchester XPR. This is a fine-handling rig with a smooth bolt and many chambering options. Right now at CDNN Sports the basic gray-stocked Winchester XPR is on sale for $379.99. But here’s the kicker, Winchester is offering a $100.00 Mail-In Rebate. That drops your net cost to just $279.99. That’s an insanely good deal. You can also get the XPR in Vias Camo for $299.99 after rebate. Get Rebate Form HERE.

4. Browning — Big Rebates on Rifles, Shotguns, and Pistols

Browning shotgun Christmas December Buckmark $100 Rebate

Browning is running a big promotion this month, with significant rebates on many popular Browning firearms. Save $100 on over/under and auto-loading shotguns, save $75 on Pump Shotguns, Centerfire Rifles, Rimfire Rifles and Rimfire Pistols. You can also save $50 on centerfire pistols. If you’ve been eyeing a Browning Buckmark .22LR Pistol, now is a great time. CLICK HERE for rebate details.

Browning shotgun Christmas December Buckmark $100 Rebate

5. Amazon — Steiner AZ830, 8×30 Binoculars, under $135

Steiner Military Marine 8x30 8x20mm AZ830 discount binoculars

Need a good set of rugged, affordable binoculars for hunting or varmint work? Then check out the Steiner AZ830 at $131.21. These are essentially identical to the respected Steiner 8×30 Military Marine binoculars which sell for around $230.00. The only differences are the color and the packaging. The AZ830s are a black “house brand” created for Amazon by Steiner. Other than the color (black vs. OD Green) everything is the same. Same bright glass, same auto focus system, some tough rubber armor, same rock solid Steiner Heritage Warranty. With these Steiner binoculars, once you adjust the eyepieces, everything from 20 yards to infinity is in focus. We highly recommend these AZ830 binoculars — the quick-focus system works really well in the field.

Specifications: 8X magnification, 30mm objective lenses, 20mm eye relief, 18 oz. weight, 6.8×2.4×4.6 inches. Auto-focusing design has sharp focus from 20 yards to infinity.

UPDATE: Sorry guys… Amazon’s price on the AZ830 has bounced between $116 and $136 in the last 48 hours. We really can’t keep up on the hourly price shifts. You can use CamelCamelCamel.com to track AZ830 price shifts in the days ahead.

6. Amazon — Howard Leight Electronic Muffs, $34.99

AccurateShooter Deals of the Week Muffs hearing protection Howard Leight earmuffs sale bargain

Every shooter should own a pair of Electronic muffs, even if you prefer shooting with earplugs and/or standard muffs. Electronic muffs are great when you are doing spotting duties or are working near the firing line. They allow you to hear ordinary conversations while still providing vital hearing protection. Right now Amazon.com has the Howard Leight Impact Sport Electronic Muffs on sale for just $34.99, with free Prime Shipping. This is good deal — these NRR 22 muffs are currently Amazon’s #1 seller in the category.

7. Stocky’s — LR Stocks with Aluminum Bedding Block, $179.99

Stocky's Stocks Composite V-block stock

Here’s a good deal on a versatile Stocky’s Long Range Stock with aluminum V-block bedding system. For just $179.99, order this for Rem/Rem Clone long actions or short actions, with either narrow or wide (varmint/tactical) barrel channel. This would be a good choice for a varmint rifle. This is also offered with handsome hydrographic or web-pattern baked-on textured finishes for $199.99.

8. MidwayUSA — 25% Off all 5.11 Gear and Apparel

MidwayUSA 5.11 gear clothing 25% Off sale

When you see the 5.11 logo, you may think “tactical trousers”. But 5.11 makes many other quality products including boots, backpacks, gun cases, range bags, camo gear, holsters, and even smartphone cases. Right now MidwayUSA has discounted its entire inventory of 5.11 products. You can save 25% on apparel, packs, gun cases and more.

9. MidwayUSA — Blaze Orange Hunting Vest, $5.00

MidwayUSA blaze orange hunting hunter vest pockets clearance sale

If you hunt, you need one of these. In fact, in some States, Hi-Viz orange gear is mandatory. Right now MidwayUSA is running a super clearance sale on the MidwayUSA Deluxe Blaze Orange Vest. You can now get this vest for just five bucks ($5.00). Available in L, XL, and XXL, this bright vest features two Cargo Pockets with snaps plus two Handwarmer Pockets. It is made with a quality YKK zipper and “Quiet Double Layer” fabric.

Permalink Bullets, Brass, Ammo, Hot Deals, Tactical No Comments »
May 8th, 2017

Hot New Benchrest Gear from PMA Tool

PMA Tool Lenzi Rear Bag SEB front rest top Pat Reagin Weaver 46x48 XR T-Series

Pat Reagin of PMA Tool took some cool new products to the range this past weekend. Look carefully at the photo above. That’s not a standard bag-holder on the SEB NEO rest, and that stylish black rear bag doesn’t look anything like an Edgewood or Protektor. The rifle is also sporting the new-generation Weaver 46x48mm T-Series XR Side-Focus Scope.

Lenzi Rear Sand Bag
Pat tells us: “We are now carrying rear bags made by Italian benchrester Alberto Lenzi. Made in Italy, these Lenzi bags are AWESOME! They are available for short range and one that is slighty taller for long range.” The Lenzi rear bags feature a big, 8″x6″ footprint with a thick, slightly concave base that sits very flat on the bench top. Lenzi bags are very stable with a reassuring “dead” feel on the bench. Guys who have tried this bag really like it. Pat says: “I can’t explain it, but the bag seems to absorb energy/recoil better than other bags — the gun tracks a little better and I get back on target really well.” CLICK HERE for more information: Lenzi Long Range Rear Bag | Lenzi Standard Rear Bag.

PMA Tool Lenzi Rear Bag SEB front rest top Pat Reagin Weaver 46x48 XR T-Series

– Black leather with Cordura at stock contact points with blue stitching.
– 1/2″ flat between medium ears.
– Heavy 8″x6″ base with built-in “donut”.
– Weight about 15.5 lbs filled with heavy sand in bottom & white sand in ears.

Lenzi Replacement Top for SEB NEO Front Rest
A common complaint about the SEB NEO rest is the rest top, specifically the three-piece bag. This rest top made by Alberto Lenzi (an Italian benchrest shooter) addresses the issue by replacing the entire rest top. The rest top features a more conventional design and includes a traditional style front bag that conforms to IBS and NBRSA rules.

PMA Tool Lenzi Rear Bag SEB front rest top Pat Reagin Weaver 46x48 XR T-Series

The Lenzi Top with Super-Slick Bag is $269.95, while the bag alone is $79.95. You can also get the Lenzi NEO Replacement Top with an Edgewood bag for $275.95. Finally there is a new Lenzi Cordura style bag that fits this system — you can special request that.

Weaver 46x48mm T-Series XR Benchrest Scope
Weaver’s new 46-power T-Series XR scope features a 30mm main tube with side parallax adjustment. Clicks are 1/8 MOA, with 44 MOA windage and elevation travel. Pat Reagin reports: “It’s clear enough. The clicks are a little mushy, but positive. Eye relief is great.”

PMA Tool Lenzi Rear Bag SEB front rest top Pat Reagin Weaver 46x48 XR T-Series

Available reticles are Fine Crosshair (FCH) and 1/16 MOA Target Dot. Current “street price” is around $900. Amazon currently has the Target Dot Version for $898.99 with free shipping.

Permalink Competition, Gear Review, New Product 1 Comment »
April 14th, 2017

Gear Review: PMA Action Cleaning Tool

PMA Action Cleaning Tool Kit

A few years back our friend Danny Reever acquired the PMA Action Cleaning tool. He’s now used it for many seasons and it’s still working great. If you shoot a precision rifle, it deserves to have a clean action and lug recess area. This handy tool speeds up the cleaning process, letting you do a more thorough job in less time.

PMA Action Cleaning Tool Kit Review by Danny Reever
I’ve been using the PMA Action Cleaning Tool Kit for quite some time. Previously, I used one of the old style (round knob) Sinclair action-cleaning tools with cylindrical cotton rolls. With the Sinclair tool, I was pretty satisfied that I was getting my actions reasonably clean. But, as I explain below, I think the newer PMA Action Cleaning Tool Kit is easier to use, and possibly achieves better results.

PMA Tool Kit Extensively Tested with Many Action Types
PMA tried a variety of options before finalizing the PMA Action Cleaning Tool Kit. PMA explains that several shooters did a lot of testing “with various sizes of die-cut foam, patches, felts and cotton rolls with various bolt action types (BAT two- and three-Lug, Kelblys, Halls, Remingtons, Winchesters and Savages). [Testers all agreed] that the foam disc is far superior to felts and cotton rolls [and] we decided to include two different sizes of foam discs.”

The PMA Action-Cleaning Tool uses round foam discs in two included sizes: 1″ diameter and 1.25″ diameter. Both size discs can be used alone, or with a 3″ patch wrapped around them. The handles of the tools are CNC-machined blue-anodized aluminum with a silicone sleeve for grip. The PMA tool handles are a bit longer than those of my old Sinclair action-cleaning tool. I like the added handle length, and I find the design of the handle easier to use compared to the old-style round knobs.

The PMA tools are quality items. They are an improvement over my older Sinclair action-cleaning set-up. But do the PMA tools they actually clean the action better or easier than the old style cotton rolls? Well, based on my experience, the answer is a definite “maybe”.

Comparison Testing — Cotton Rolls vs. PMA Foam Discs (with and without patches)
Starting with the old-style cotton roll system, I cleaned my actions to a level I considered “clean” in the past. I then tried the included PMA foam discs. I found that, for my Remington-style actions, the larger 1.25″-diameter disc seemed to work better than the smaller 1″-diameter disc. Wrapping the larger disc with a 3″ patch definitely brought out more crud from my previously cleaned actions than the old style cotton rolls. Well, you might ask, what if you wrap the old-style cotton roll with a patch? Yes that will remove more crud too, but perhaps not as much as the PMA system. Moreover you would have to buy both cotton rolls AND 3″ patches. Not many places sell the cotton rolls.

Is it worth plunking down the $49.95 for the complete PMA system? Well, if you want to upgrade to a quality-made tool with better handles the answer is yes. Is getting that last bit of crud out of your action every time you clean it that important to you? You have to decide that for yourself. From my own perspective, I was due for an upgrade so the answer was easy. I like the PMA system, especially the new improved handles. Also, with the PMA system I don’t have to fool around with a tiny Allen screw to secure the cotton rolls — that was annoying. So my final take on the PMA Action Cleaning Tool Kit is that it is a good product with some real advantages over other action-cleaning systems.

PMA Action Cleaning Tool Kit

PMA Tool charges $49.95 for the complete Action Cleaning Tool Kit that includes a chamber cleaning handle and cotton swab. PMA offers the lug recess action cleaning tool by itself with four foam cleaning discs and five 3″ patches. Cleaning discs are also available separately in your choice of 1″- and 1.25″-diameter in a five pack.

Action Cleaning Tool Kit (complete): $49.95
Lug Recess Tool Only (includes 4 Cleaning Discs): $38.95
Chamber Swab Tool (includes Cotton Chamber Swab): $14.95
Additional 1″ Cleaning Discs: $4.95
Additional 1.25″ Cleaning Discs: $4.95

Permalink Gear Review, Gunsmithing 1 Comment »
March 23rd, 2017

PMA Micro-Die Adjuster — Try One And You’ll Be Spoiled

PMA Tool Micro Die Adjuster .001 Shoulder Bump full length sizing lift shim

Wouldn’t it be great if you could quickly and easily adjust shoulder bump during the full-length sizing process, without struggling to move die lock-rings by trial and error (or fiddle with shims). Well you can. The PMA Micro Die Adjuster is a brilliant little device that replaces the lock ring on your FL sizing die. It allows you to move the die up and down in precise, tiny increments. The tool has .001″ index marks, but you can easily set your die between the marks to achieve .0005″ (half-thousandth) adjustments.

The affordable PMA Micro Die Adjuster is offered in two versions, an upgraded model with a handy thumb screw for $69.95 (photo above), as well as the original with set screw for $65.95 (photo below).

PMA Tool Micro Die Adjuster .001 Shoulder Bump full length sizing lift shim

To see how the PMA Micro-Die Adjuster works, watch this video by our friend Boyd Allen:

Many of our Forum members now use the PMA Micro Die Adjuster, and they give this specialty tool high praise. Here are actual reviews by Forum members and other verified tool buyers. Read more comments in this AccurateShooter Forum Thread.

PMA Micro Die Adjuster User Reviews

“No more ‘close enough’ for headspace[.] With this tool set-up it’s easy to put headspace exactly where you want it, then repeat it exactly for subsequent batches for the same cartridge.” — JohnF

“I have four of these Micro Adjuster rings and all I can say is that it works and it is repeatable. I bump my brass .0005″-.001″ and this die lock ring will do it without issue.” — TrapperT

“I size brass for four different 6.5×47 rifles (chambered with three different reamers) using a single die, set in the PMA Adjuster. I have to say… I should have bought one sooner. Adjusting it is very quick and repeatable to well under .001.” — /VH

“I’ve been using PMA’s lock ring for some time now and find it to be very easy to adjust to within .0005″ on a single piece of brass. Very quick to do as well. One thing I have found is that if you still need that half-thou adjustment I will run the brass once more at the same setting before I make that .0005″ adjustment and 50 percent of the time that does the trick. The marked increments are in .001″ scale so if you go half way in between there’s your half-thousandth.

PMA Micro-Adjuster vs. Shims

Many hand-loaders have abandoned shims after trying the PMA Micro Die Adjuster:

“Shims [require] you to completely remove the die. That gets old rather quickly after having used the PMA adjustable lock ring.” — Patch 700

“Great product. Shims used to drive me crazy, put a .002 in and get .0035 of change. With this if you want .0015 set it and that’s what you get.” — John B

“I like mine — adjustments are easy and it will adjust very fine. I used to use .001″ shims. Now can adjust my bump as fine as I want.” — Joe139

PMA Micro die adjusterProduct Description from PMA Tool
The PMA Tool Micro Die Adjuster (MDA) replaces your existing lock ring and can be used with nearly any 7/8-14 full length sizing die. We successfully used this tool with sizing dies from Redding, RCBS, Hornady, Lee, Harrells Precision and those made from Newlon Precision die blanks. It allows you to easily make adjustments to your “shoulder bump” as fine as .0005″. The engraved marks on the MDA are equal to approximately .001 inches (true adjustment .000992″) of adjustment to the shoulder bump. Splitting the engraved marks is therefore approximately equal to .0005″. The design of the MDA does not allow it to work with the Forster Co-Ax press. Some custom dies for very short cartridges may require the use of an extended shellholder. Micro Die Adjuster shown in use installed on Custom Newlon/Scott 6mm PPC Die and Harrells Precision Compact Press.

Permalink Gear Review, Reloading 1 Comment »
March 5th, 2017

PMA Micro-Adjust Case Trimmer — Precise and Handy

PMA Micro Adjust Case Trimmer

Serious reloaders know that PMA Tool makes some of the best specialty reloading tools you can buy. To help folks get the most out of their PMA products, the company offers “how-to” videos. One such video features PMA’s great Micro-Adjust Case Trimmer. PMA owner Pat Reagin tells us: “We’ve had quite of bit of interest in the case trimmer, but a lot of guys want to see it in action. So we’ve created an intro video that shows how to adjust and use the trimmer in various modes.”

Watch Micro-Adjust Case Trimmer Video

The PMA Micro-Adjust Case trimmer indexes off the shoulder but it also provides precise control over neck length. You aren’t limited to a built-in, neck-length setting like some other shoulder-indexed trimmers. The PMA Micro-Adjust Trimming tool currently sells for $129.95 including one cartridge insert. The inserts, which can be purchased for $13.95 separately, can often work for a multiple cartridge types within the same family. For example, you can use the same insert for both .243 Win and .260 Rem. There is another insert that works with both 7mm-08 and .308 Win.

PMA Micro-Adjust Case Trimmer Features:

  • Indexes off shoulder for easy, consistent trim length.
  • Cases captured in no-scratch, Delrin™ inserts.
  • Fully rotating head with bearing for smooth operation and clean, square cuts.
  • Sharp carbide cutter for quick, smooth cuts with minimal burr.
  • Spring loaded head allows complete control of rate of feed.

How to use the PMA Micro-Adjust Case Trimmer
The trimmer indexes case off the case shoulder through the use of interchangeable Delrin™ inserts which capture the shoulder and neck of the case. This insert is contained in a spring-loaded tool head that rides on a linear bearing. The Micro-Adjust Trimmer can be used in three ways.

PMA Micro Adjust Case Trimmer

First, you can secure the case in a PMA caseholder chucked in a power drill, drill press, or lathe. You hold the trimming tool with your hand and feed in the spinning case. (This method is handy because if you leave the case in the holder, after you have trimmed to length, you can switch tools and chamfer the case-mouth using the same power source).

PMA Micro Adjust Case Trimmer

In the second method, the trimmer’s adjustment knob is removed (after locking the setting) and the cutting shaft is chucked in a drill, drill press. or lathe. Using this method, the case itself is held by hand and fed into the cutter. Lastly, the trimmer can be used manually, holding the case in one hand and the trimmer in the other. That’s the slowest method, but it works if you do not have power tools handy.

Permalink - Videos, Gear Review, Reloading 2 Comments »
April 16th, 2016

Helpful Advice on Case Trimming from PMA Tool

Eric Cortina Trimmer
The Giraud power trimmer indexes off the shoulder of the case. It is costly, but offers high production rates, trimming to length and chamfering in one operation.

The folks at PMA Tool, makers of arbor presses, neck-turning tools, and other case-prep tools, offer some good advice about case trimming on the PMA Tool Blog. Here we reprint a PMA blog post that explains case trimming basics and helps you choose the right case-trimming tool for your needs.

Case Trimming Basics
Trimming the cartridge case to the proper length is a crucial step in case preparation that should not be overlooked or underestimated. The cartridge case or the rifle can be damaged, or even worse you get badly injured. In most instances cases should be trimmed after firing and sizing. Trimming new brass is necessary for a lot of wildcats and can be beneficial in some instances, but by and large, trimming new brass is not necessary for most situations (unless you are neck-turning). Cases should be trimmed after you have sized the case, because the expander ball on the decapping pin can (and will) stretch the neck. Those of us who neck size should get into the habit of trimming after sizing as well. This is a good rule of thumb to go by, and hopefully it will keep you safe during the reloading and shooting process.

There are so many case trimmers out there that work, deciding which one is right for you can be confusing. Even though I have trimmed thousands of cases, using about every method possible, I can’t answer the question of what case trimmer is right for you because of all the variables that may be involved. I can, however shed some light on the subject.

Wilson Micrometer Case Trimmer

The two most popular designs of trimmers either index (1) off the base or the head of the case, (2) off the shoulder or datum line of the case. There are pros and cons to each and it all depends on what you are willing to live with.

Indexing off the Base (Case Head)
Let’s talk about the first one I have listed, indexing off the base, or the head of the case. The pros to this method are that you can achieve a very accurate over all length and that is after all, what it is all about. The cons to this method are that you can get some variation doing it this way. Let me explain, the base is not always square to the body or can be damaged during firing especially if it is fired through a military style rifle with a very aggressive ejector. These cases should be discarded, but sometimes they can be overlooked. This condition can lead to an over all length that is incorrect. The case head being out of square will be corrected upon firing, however that case will wind up being shorter than the rest of your cases, possibly creating a difference in the neck tension on the bullet. The more you can do to eliminate variables in your reloads the better off you are going to be. This method can also be very slow, and if the user gets careless the result will be a inconsistent over all length.

Forster Case Trimmer

Indexing off the Shoulder (Datum Line)
The second method I mentioned, trimming off the shoulder or the datum line of the case, has its pros as well. I have found this to be the quickest of the methods and very accurate as well. After the case has been sized through the die the dimensions (particularly the headspace) of the cases are usually very uniform and exact, this allows the case to be trimmed by indexing off the shoulder. This method can be done very quickly, by hand, or by powering either the case, or the trimmer. You also don’t have to worry about the case heads being out of square with the body using this method. Generally the trimming time is cut in half, and this leads to greater focus on the job, without becoming careless.

PMA tool case trimming trimmer micro-adjust

The PMA Micro-Adjust Case Trimmer indexes case length off of the shoulder of a properly fire-formed and full-length re-sized case. We accomplish this through the use of interchangeable Delrin™ inserts which capture the shoulder and neck of the case. This insert is contained in a spring-loaded tool head that rides on a linear bearing. When the case is captured within the tool head the tool head rotates along with the case, the spring allows for the case to self-align squarely to the cutter and allows you to control the feed rate into the cutter.

— Indexes off shoulder for easy, consistent trim length
— Fully rotating head with bearing for smooth operation keeps cuts square
— Large, ergonomic design fits the hand well
— Sharp carbide cutter for quick, smooth cuts with minimal bur
— Cases captured in Delrin™ (completely non-marring material)
— Spring loaded head allows complete control of rate of feed.

Our trimmer can be used in three ways. The first method utilizes our PMA Tool caseholder drivers and your power screwdriver, drill, case lathe, drill press or lathe. Trimming via this method the case is spun and fed into the trimmer while it is held in your hand. In the second method, the trimmer’s adjustment knob is removed (after adjusting and locking the setting) and the cutting shaft is chucked in a drill, drill press or lathe. Using this method, the case itself is held by hand and fed into the cutter. We’ve found this to be the quickest method to trim.

Summary
The choice is yours to make. I hope that this was some help to you, whether you are looking for your first trimmer or looking to replace the trimmer you have. Just remember to always put safety first and accuracy second, and you will start making little bug holes in no time.

Story Tip by EdLongrange. User Submissions are welcome.
Permalink - Articles, Reloading 2 Comments »
March 26th, 2016

PMA Micro Die Adjuster — User Reports

PMA Tool Micro Die Adjuster .001 Shoulder Bump full length sizing lift shim

Wouldn’t it be great if you could quickly and easily adjust shoulder bump during the full-length sizing process, without struggling to move die lock-rings by trial and error (or fiddle with shims). Well you can. The PMA Micro Die Adjuster is a brilliant little device that replaces the lock ring on your FL sizing die. It allows you to move the die up and down in precise, tiny increments. The tool has .001″ index marks, but you can easily set your die between the marks to achieve .0005″ (half-thousandth) adjustments.

The affordable PMA Micro Die Adjuster is offered in two versions, an upgraded model with a handy thumb screw for $69.95 (photo above), as well as the original with set screw for $65.95 (photo below).

PMA Tool Micro Die Adjuster .001 Shoulder Bump full length sizing lift shim

To see how the PMA Micro-Die Adjuster works, watch this video by our friend Boyd Allen:

Many of our Forum members now use the PMA Micro Die Adjuster, and they give this specialty tool high praise. Here are actual reviews by Forum members and other verified tool buyers. Read more comments in this AccurateShooter Forum Thread.

PMA Micro Die Adjuster User Reviews

“No more ‘close enough’ for headspace[.] With this tool set-up it’s easy to put headspace exactly where you want it, then repeat it exactly for subsequent batches for the same cartridge.” — JohnF

“I have four of these Micro Adjuster rings and all I can say is that it works and it is repeatable. I bump my brass .0005″-.001″ and this die lock ring will do it without issue.” — TrapperT

“I size brass for four different 6.5×47 rifles (chambered with three different reamers) using a single die, set in the PMA Adjuster. I have to say… I should have bought one sooner. Adjusting it is very quick and repeatable to well under .001.” — /VH

“Great product. Shims used to drive me crazy, put a .002 in and get .0035 of change. With this if you want .0015 set it and that’s what you get.” — John B

“I’ve been using PMA’s lock ring for some time now and find it to be very easy to adjust to within .0005″ on a single piece of brass. Very quick to do as well. One thing I have found is that if you still need that half-thou adjustment I will run the brass once more at the same setting before I make that .0005″ adjustment and 50 percent of the time that does the trick. The marked increments are in .001″ scale so if you go half way in between there’s your half-thousandth.

PMA Micro-Adjuster vs. Shims: With respect to using shims, that requires you to completely remove the die. That gets old rather quickly after having used the PMA adjustable lock ring.” — Patch 700

“I like mine — adjustments are easy and it will adjust very fine. I used to use .001″ shims. Now can adjust my bump as fine as I want.” — Joe139

“The PMA adjuster works just like they say it does and is very simple to use and adjust. I use JLC inserts as well … as nice as they are you’re still hobbled by a click. However with the PMA you can go between what would be clicks. And you can use them … with any die.” — Dusty Stevens

PMA Micro die adjusterProduct Description from PMA Tool
The PMA Tool Micro Die Adjuster (MDA) replaces your existing lock ring and can be used with nearly any 7/8-14 full length sizing die. We successfully used this tool with sizing dies from Redding, RCBS, Hornady, Lee, Harrells Precision and those made from Newlon Precision die blanks. It allows you to easily make adjustments to your “shoulder bump” as fine as .0005″. The engraved marks on the MDA are equal to approximately .001 inches (true adjustment .000992″) of adjustment to the shoulder bump. Splitting the engraved marks is therefore approximately equal to .0005″. The design of the MDA does not allow it to work with the Forster Co-Ax press. Some custom dies for very short cartridges may require the use of an extended shellholder. Micro Die Adjuster shown in use installed on Custom Newlon/Scott 6mm PPC Die and Harrells Precision Compact Press.

Permalink - Videos, Gear Review, Reloading 4 Comments »
December 23rd, 2015

PMA Tool Offers Adjustable Stock Weight System

PMA Toll weight system

PMA Tool now offers a unique “adjustable” Stock Weight System with variable weighting from 2 to 8 ounces (including internal sleeve). This $65.95 system allows the shooter to add or remove weight (in the buttstock) to balance the gun, or adjust the weight to meet class weight limits. Say, for example you were running at max weight but then changed your scope for a new optic that weighed 4 ounces less. With this system, you can easily get back up to the “legal limit”. You can also use the weight to adjust balance when running barrels of different lengths or contours.

The PMA Stock Weight system is made up of a sleeve, a nut and three interchangeable weights. The sleeve and nut weigh 2 ounces (combined) and weight inserts of 2, 4 and 6 ounces are included in the system. The sleeve is machined from aluminum, while the nut and weights are machined from stainless steel. All weights are roll-stamped with their weights and “coin-slotted” so they can be easily installed using a screwdriver or coin. The nut utilizes a 1/4″ hex wrench for removal from the sleeve and installation of weights.

While installation of these Stock Weight Systems is fairly simple, PMA states that: “The sleeve should be installed into the buttstock by someone with some mechanical aptitude and an understanding of stock construction, preferably a trained gunsmith or stock-fitter.”

Product tip from EdLongrange. We welcome reader submissions.
Permalink Gear Review, Gunsmithing No Comments »
February 3rd, 2015

Get 10% Off PMA Tool Products This Month

PMA Tool save sale discount codeYou guys like saving money, right? We’ll here’s your chance to get 10% off precision reloading gear from PMA Tool. You probably know that PMA offers some of the best neck turners, priming tools, die adjusters, mandrels, and case prep accessories you can buy. PMA products feature smart design and quality craftsmanship.

To celebrate the roll-out of its updated website, PMA has announced a 10% OFF promotion. PMA President Pat Reagin tells us: “The new website is up and running. If you get a chance, take a look. Use coupon code 1B65B218A3C95ED to receive 10% off all items from now until March 1st. — Good shooting, Pat.”

Get 10% OFF PMA Products with PMA Code 1B65B218A3C95ED

Discount Code Good through March 1, 2015. Does Not Apply to Back-orders.

PMA Tool save sale discount code

Permalink Hot Deals, Reloading 1 Comment »
July 19th, 2014

Tips on Case-Trimming from PMA Tool

The folks at PMA Tool, makers of arbor presses, neck-turning tools, and other case-prep tools, offer some good advice about case trimming on the PMA Tool Blog. Here we reprint a PMA blog post that explains case trimming basics and helps you choose the right case-trimming tool for your needs.

Case Trimming Basics
Trimming the cartridge case to the proper length is a crucial step in case preparation that should not be overlooked or underestimated. The cartridge case or the rifle can be damaged, or even worse you get badly injured. In most instances cases should be trimmed after firing and sizing. Trimming new brass is necessary for a lot of wildcats and can be beneficial in some instances, but by and large, trimming new brass is not necessary for most situations (unless you are neck-turning). Cases should be trimmed after you have sized the case, because the expander ball on the decapping pin can (and will) stretch the neck. Those of us who neck size should get into the habit of trimming after sizing as well. This is a good rule of thumb to go by, and hopefully it will keep you safe during the reloading and shooting process.

There are so many case trimmers out there that work, deciding which one is right for you can be confusing. Even though I have trimmed thousands of cases, using about every method possible, I can’t answer the question of what case trimmer is right for you because of all the variables that may be involved. I can, however shed some light on the subject.

Wilson Micrometer Case Trimmer

The two most popular designs of trimmers either index (1) off the base or the head of the case, (2) off the shoulder or datum line of the case. There are pros and cons to each and it all depends on what you are willing to live with.

Indexing off the Base (Case Head)
Let’s talk about the first one I have listed, indexing off the base, or the head of the case. The pros to this method are that you can achieve a very accurate over all length and that is after all, what it is all about. The cons to this method are that you can get some variation doing it this way. Let me explain, the base is not always square to the body or can be damaged during firing especially if it is fired through a military style rifle with a very aggressive ejector. These cases should be discarded, but sometimes they can be overlooked. This condition can lead to an over all length that is incorrect. The case head being out of square will be corrected upon firing, however that case will wind up being shorter than the rest of your cases, possibly creating a difference in the neck tension on the bullet. The more you can do to eliminate variables in your reloads the better off you are going to be. This method can also be very slow, and if the user gets careless the result will be a inconsistent over all length.

Forster Case Trimmer

Indexing off the Shoulder (Datum Line)
The second method I mentioned, trimming off the shoulder or the datum line of the case, has its pros as well. I have found this to be the quickest of the methods and very accurate as well. After the case has been sized through the die the dimensions (particularly the headspace) of the cases are usually very uniform and exact, this allows the case to be trimmed by indexing off the shoulder. This method can be done very quickly, by hand, or by powering either the case, or the trimmer. You also don’t have to worry about the case heads being out of square with the body using this method. Generally the trimming time is cut in half, and this leads to greater focus on the job, without becoming careless. [Editor’s Note: The World’s Finest Trimmer (WFT) is one power device that indexes off the shoulder datum. It works fast and is very precise. The new WFT 2 Model with interchangeable trim chambers works with multiple cartridge types.]

Little Crow WFT

Summary
The choice is yours to make. I hope that this was some help to you, whether you are looking for your first trimmer or looking to replace the trimmer you have. Just remember to always put safety first and accuracy second, and you will start making little bug holes in no time.

Story Tip by EdLongrange. User Submissions are welcome.
Permalink Bullets, Brass, Ammo, Reloading 5 Comments »