Eurooptic vortex burris nightforce sale




teslong borescope digital camera barrel monitor


As an Amazon Associate, this site earns a commission from Amazon sales.









April 30th, 2018

RDF Bullets from Nosler — High BCs and Uniform Meplats

Nosler RDF reduced drag factor match bullets PRS High BC uniform meplats

Nosler’s line of RDF™ (Reduced Drag Factor) bullets feature very high Ballistic Coefficients, hybrid-type ogives, and tight, factory-closed meplats. Nosler’s RDF bullets were designed to be very competitive match projectiles for their respective bullet weights. Now offered in four calibers, Nosler RDF bullets genuinely deliver excellent performance for the price. Shooters, particular PRS competitors, have found the RDFs deliver the flat trajectory and high BC necessary to reach the podium.

Nosler RDF reduced drag factor match bullets PRS High BC uniform meplats

Nosler is proud of its RDF bullets, which feature tight, uniform meplats: “Nosler knows what gives competitive shooters an edge, isn’t an edge at all. It’s a point. With the highest in-class Ballistic Coefficient and smallest, most consistent meplat, RDF is the flattest-shooting match bullet in its class. Now available in more calibers and weights, the RDF’s meticulously-optimized compound ogive and long, drag-reducing boat-tail make achieving peak accuracy a snap”.

Experience RDF, the Flattest-Shooting Match Bullet:

Current Nosler RDF Bullets:
• 22 Cal 70 grain — G1 Ballistic Coefficient 0.416 | G7 Ballistic Coefficient 0.211
• 22 Cal 85 grain — G1 Ballistic Coefficient 0.498 | G7 Ballistic Coefficient N/A
• 6mm 105 grain — G1 Ballistic Coefficient 0.571 | G7 Ballistic Coefficient 0.280
• 6.5mm 140 grain — G1 Ballistic Coefficient 0.658 | G7 Ballistic Coefficient 0.330
• 30 Cal 175 grain — G1 Ballistic Coefficient 0.536 | G7 Ballistic Coefficient 0.270

RDF bullets are also available in Nosler factory ammunition in a variety of popular cartridge types. Nosler factory ammo lets you spend more time at the range and less at your reloading bench. Look for RDF bullets loaded in Nosler’s “Match Grade” Ammunition. Below is the .264-caliber, 140 grain RDF loaded in 6.5 Creedmoor, a popular chambering for PRS and tactical shooters.

Nosler RDF reduced drag factor match bullets PRS High BC uniform meplats

Permalink Bullets, Brass, Ammo, Gear Review, Tactical No Comments »
August 16th, 2017

Nosler Delivers High-BC, Closed-Meplat RDF Match Bullets

Nosler RDF Bullets tipped bullets closed meplats hybrid ogive

Nosler RDF Bullets tipped bullets closed meplats hybrid ogiveLate last year, word broke of a new line of RDF™ (Reduced Drag Factor) bullets featuring very high Ballistic Coefficients, hybrid-type ogives, and tight, factory-closed meplats. Nosler’s new RDF bullets promised to be very competitive match projectiles for their respective bullet weights, based on initial specs and their billing as “the highest BCs and smallest, most consistent meplats on the market”. But would they perform as advertised?

Since their introduction, the Nosler RDF line have become very popular, offering excellent performance for the price. Shooters, particular PRS competitors, have found the RDFs deliver the flat trajectory and high BC necessary to reach the podium. There are now rumors that Nosler will expand the RDF line (which currently includes four calibers/bullet weights) to include new calibers/weights in 2018. However an official announcement is still forthcoming.

Current Nosler RDF Bullets:
• 22 Cal 70 grain — G1 Ballistic Coefficient 0.416 | G7 Ballistic Coefficient 0.211
• 6mm 105 grain — G1 Ballistic Coefficient 0.571 | G7 Ballistic Coefficient 0.280
• 6.5mm 140 grain — G1 Ballistic Coefficient 0.658 | G7 Ballistic Coefficient 0.330
• 30 Cal 175 grain — G1 Ballistic Coefficient 0.536 | G7 Ballistic Coefficient 0.270

Nosler RDF Bullets tipped bullets closed meplats hybrid ogive

Compound Ogive for High BC
Nosler designed the RDF bullets to have very high BCs for flatter trajectories and reduced wind drift. Nosler achieved high BCs by adopting a modern hybrid-type compound ogive, which bridges traditional tangent and secant bullet shapes. This hybrid shape is less sensitive to bullet seating depth than a pure VLD-style, secant ogive shape. That allows hand-loaders to seat away from the lands and still get excellent accuracy, which can be maintained even as the throat moves out over time. RDF bullets also feature a long boat-tail for aerodynamic efficiency.

Factory-Closed Meplats — No More Trimming
Compared to conventional match bullets, Nosler’s RDF bullets look quite different because the tips have been tightly closed up at the factory. Nosler promises a 40% average reduction in meplat size vs. conventional hollow-point bullets. Hand-loaders no longer need to point and trim tips, a laborious task to improve BC and make BCs more consistent for every bullet in the box. Consistent BC translates to reduced vertical spread at long range.

Less Wind Drift, Tighter Vertical
What can you expect on the firing line with Nosler RDF bullets? If you’re a skilled shooter who can capitalize on reduced drag and increased consistency from your ballistics, you should see less wind drift, and reduced vertical dispersion at long range. That translates to tighter groups and higher scores in competition. That’s all good. And when you compare the cost of Nosler’s RDF bullets with other match projectiles, you may be pleasantly surprised.

Permalink - Videos, Bullets, Brass, Ammo, Gear Review 1 Comment »
February 18th, 2017

Great Pricing on Nosler Blem Bullets — Up to 53% Off

nosler blem seconds bullet sale

Nosler Factory Seconds are now available at Midsouth Shooters Supply. These bullets are completely functional (with correct weights and dimensions), with only minor cosmetic blemishes. You’ll find slight tip discolorations, water spots, and little else. The Accubond and Ballistic Tip bullets will work great for hunting — your prey won’t care about the water spots. And the RDF match bullets can definitely do the job for Service Rifle matches (70gr .224) or F-TR events (175gr .308). Getting match-grade, 30-Cal 175-grainers for $21.49 is a total steal. But you need to act soon — quantities are limited and these factory seconds blems always go fast. Once they are gone, they’re GONE!
nosler blem seconds bullet sale

Nosler Rifle Bullets on Sale Include:

.224 70gr BTHP RDF Match — now $13.49/100 (regularly $28.84)
.308 175gr BTHP RDF Match, $21.49/100 (regularly $37.21)

.243 (6mm) 70gr Spitzer Ballistic Tip Varmint, $15.49/100 (regularly $28.76)
.270 130gr Spitzer Accubond, $16.49/100 (regularly $29.49)
.284 (7mm) 168gr Spitzer LR Accubond, $36.49/100 (regularly $51.16)
.284 (7mm) 175gr Spitzer LR Accubond, $38.49/100 (regularly $51.16)
.308 168gr Spitzer Ballistic Tip Hunting, $15.49/50 (regularly $20.06)
.308 175gr BTHP Custom Competition, $22.49/100 (regularly $35.41)
.308 180gr Spitzer Ballistic Tip Hunting, $15.49/50 (regularly $20.61)
.308 200gr Spitzer Accubond $18.49/100 (regularly $34.94)

Permalink Bullets, Brass, Ammo, Hot Deals 2 Comments »
October 21st, 2016

Nosler Introduces High-BC, Closed-Meplat RDF Match Bullets

Nosler RDF Bullet compound hybrid ogive tangent secant

Nosler has introduced a new line of RDF™ (Reduced Drag Factor) bullets that feature very high BCs, hybrid-type ogives, and tight, factory-closed meplats. Based on initial specs, Nosler’s new RDF bullets should be very competitive match projectiles for their respective bullet weights. Nosler claims its new RDF bullets have “the highest BCs and smallest, most consistent meplats of any hollow-point match bullet line on the market.” RDF projectiles will be initially offered in four calibers: .224, 6mm (.243), 6.5 mm (.264), and .308.

NEW Nosler RDF Bullets:

· 22 Cal 70 grain — G1 Ballistic Coefficient 0.416 | G7 Ballistic Coefficient 0.211
· 6mm 105 grain — G1 Ballistic Coefficient 0.571 | G7 Ballistic Coefficient 0.280
· 6.5mm 140 grain — BC field verification in process
· 30 Cal 175 grain — G1 Ballistic Coefficient 0.536 | G7 Ballistic Coefficient 0.270

High-BC RDF Bullets Feature Compound (Hybrid-type) Ogive Profiles
Nosler designed RDF bullets to have very high BCs for flatter trajectories and reduced wind drift. Nosler achieved high BCs by adopting a modern hybrid-type compound ogive, which bridges traditional tangent and secant bullet shapes. Another benefit of the compound (hybrid-type) ogive, is that this shape is normally less sensitive to bullet seating depth than a pure VLD-style, secant ogive shape. That allows hand-loaders to seat off the lands and still get excellent accuracy, which can be maintained even as the throat moves out over time. RDF bullets also feature a long boat-tail for aerodynamic efficiency.

Nosler RDF Bullet compound hybrid ogive tangent secant

Factory-Closed Meplats — No More Trimming and Pointing Tips
Compared to conventional match bullets, Nosler’s RDF bullets look quite different because the tips have been tightly closed up at the factory. Nosler claims a a 40% average reduction in meplat size vs. conventional hollow-point bullets. With Nosler doing the work on the tips, hand-loaders no longer need to point and trim tips, a laborious task done to improve BC and, more importantly, to make BCs more consistent for every bullet in the box. Consistent BC translates to reduced vertical spread at long range.

John Nosler Talks about RDF Bullets:
“Long-range competitive shooting [is] one of the fastest-growing shooting activities in the world, and quality bullets are the cornerstone of the sport” said John Nosler, Executive V.P. for the company. “Our engineers were challenged with delivering a bullet that would drastically reduce aerodynamic drag and increase ballistic consistency, providing shooters with an indisputable advantage. What we achieved is a leap in match bullet technology….”

Permalink Bullets, Brass, Ammo, New Product 15 Comments »