February 7th, 2020

Redding Offers New Slant-Bed Concentricity Checker

new 
Redding Reloading slant bed concentricity gauge

Redding has a new tool that can make it easier to measure case neck and bullet run-out. Redding’s new Slant Bed Concentricity Gauge features a tilted, 4-point case support. The “Slant Bed” design moves the bearing surface down and away from the user, making case rotation easier. Redding explains: “Pushing down with the index finger is a natural movement as opposed to rolling on a flat which requires the movement of the entire arm. It improves both the ease of case rotation and the maintenance of proper alignment for reading.”

The orientation of the Dial Indicator also improves ergonomics. The fixed vertical indicator stand places the indicator face at the optimal sight angle of 30°, reducing the possibility of off-center readings. Precision stainless steel bearings provide single-point contact with the cartridge case. Bearing sliders on stainles guideways allow quick and easy linear adjustment for cartridge length.

Redding’s new Slant Bed tool is affordable — $124.19 with 1″ Dial Indicator. The tool ships set-up for right-handers, but quickly converts for left-hand use.

- Ergonomic Design — Ships complete with large 1″x.001″ dial indicator
– Fixed indicator position — Dliminates set-up errors
– Precision stainless steel bearings mounted on linear guideways accept cartridge sizes from .17 Hornet to .408 CheyTac.
– Supplied with non-skid rubber feet or use direct mounting holes
– Easily converted to left-hand arrangement

Redding Product Description:
The new Slant Bed Concentricity Gauge features a large, easy-to-read dial indicator which quickly mounts in a factory aligned base dead-on the centerline of the case. No additional indicator alignment is needed. The uniquely angled design of the slant bed also better positions the dial indicator for easier reading as opposed to older designs. Additionally, the Gauge can be transitioned from right-handed use to left-handed by using a provided set of mounting holes on the base. Simply remove the mount screws and transfer the working sections from one end to the other. Left-handed users no longer need to struggle to get accurate readings.