As an Amazon Associate, this site earns a commission from Amazon sales.











January 17th, 2020

Trouble-Shooting the Remington 700 and Rem Clones

Nathan Foster New Zealand Rem 700 rifle copper fouling accurizing barrel lapping

Turn a Rough Factory Rifle into an Accurate Hunting Rig
Kiwi Nathan Foster has produced a good video for hunters with “under-performing” Remington Model 700 rifles. In this video, Nathan helps a client turn a badly-behaving Rem 700 into a reliable tack-driver. A customer had sent Nathan this rifle to rectify stubborn copper fouling. After bedding the rifle, the customer discovered that the rifle produced terrible groups due to the stubborn bore.

Nathan told us: “This was a grand opportunity to study what can go wrong with the M700 rifle with regards to both do-it-yourself work and flaws within rifle production. To help structure the video, we used the chapters of our Accurizing Book as reference steps for the video. This footage also works in conjunction with our free Remington bedding tutorials on YouTube.

Those who have watched the full M700 Troubleshooting video say this is one of the most helpful videos yet released on problem-solving with a factory hunting rifle. This video is especially helpful for those just getting into the accuracy game, as it walks the viewer through the basics of rifle tuning, then proceeds to more advanced methods of improving a badly-behaving rifle.

This video focuses on the Remington M700 and Rem clones, such as the Bergara rifle. However the lessons and techniques in the video can apply to any type of bolt-action rifle suffering heavy copper fouling. The video features detailed footage of barrel break-in and barrel-lapping procedures. These procedures may be beneficial for rough factory barrels. IMPORTANT! AccurateShooter.com recommends different break-in and maintenance regimes for custom, hand-lapped premium barrels — be conservative with fine custom barrels. Our best custom barrels have all shot superbly with minimal break-in and zero use of abrasives during break-in.

Troubleshooting the Remington 700 Rifle with Nathan Foster

NOTE: This is a free 70-second trailer video. The FULL Remington Troubleshooting Video is 1 hour, 16 minutes long and can be streamed through Vimeo-on-Demand for $12.00. Access Full Video HERE.

Nathan Foster of Terminal Ballistics Research in New Zealand, is a expert hunter and highly-respected author of a series of hunting and long range shooting books. Nathan’s first book, The Practical Guide to Long Range Hunting Rifles, is a classic — one of the best treatises ever written on choosing and using a hunting rifle.

Nathan Foster Long Range Rifles Hunting Hunter

CLICK HERE to Download Remington 700 Owner’s Manual

The Remington 700 is the most popular bolt-action rifle in America, according to Gunbroker.com sales figures for new and “previously-owned” rifles. So, chances are that you (or a family member) have a Rem 700 of some vintage sitting in the gunsafe. Click the link above for a PDF version of the Remington 700 Owner’s Manual (also covers models Seven, and 673).

Permalink - Articles, - Videos, Tech Tip No Comments »
November 7th, 2018

Tubb T7T 2-Stage Trigger for Rem 700 and Rem-Clone Actions

David Tubb two-stage 2-stage T7T trigger Rem 700 Remington clone high power

If you’re planning a build with a Remington or Rem-clone action, take heed. Here’s a trigger upgrade worth considering for an F-Class or Long-Range rig. David Tubb offers an excellent two-stage trigger for Remington 700 rifles, the Model T7T. Priced at $349.00, the Tubb T7T Trigger is a true two-stage design: first and second stages are independently adjustable for both weight and feel. Overall (combined stage) trigger pull weight can be adjusted from just under 1 pound to slightly over 3.5 pounds.

If you are interested in the T7T, watch these two videos. The first shows how to adjust pull-weights for both stages. The second video shows how to modify your stock to provide clearance for the T7T.

This video shows how to adjust the new Tubb T7T two-stage trigger for Remington 700s:

The new T7T is a quality product. We’ve received good feedback from “early adopters” who tell us the two-stage function works well. While installation of the T7T may require minor modifications to your action, most gun owners with basic mechanical skills can install the T7T by themselves. The T7T is made using stainless steel and aluminum for maximum corrosion resistance. Note, a full installation of the T7T trigger (either Right-Hand or Left-Hand) also requires a companion T7T bolt release, offered by DavidTubb.com for $10.00.

David Tubb two-stage 2-stage T7T trigger Rem 700 Remington clone high power

This video shows how to modify your stock to fit the T7T trigger:

Permalink Competition, Gear Review, New Product No Comments »
January 14th, 2017

New BAT Tactical Action Debuts at SHOT Show

Bullet Central BAT Machine Bruce Thom tactical action rem clone remington AI magazine

A beefy, new BAT action will debut at SHOT Show 2017. The new BAT TR Tactical action will be showcased by BulletCentral.com at Booth #2963. Notably, Bruce Thom, founder of BAT Machine, will be at the booth on Wednesday, January 18, 2017. Stop by to meet Bruce and learn more about this action.

Designed from the ground up for tactical and PRS shooters, the new TR action features a very stiff, robust body that still fits a Remington 700 inlet. The TR’s bolt is different than on BAT’s benchrest actions, so the TR runs better in dusty conditions and with extended strings of fire. This new action is fully compatible with Accuracy International double-stack magazines.

Bullet Central BAT Machine Bruce Thom tactical action rem clone remington AI magazine

Story idea from EdLongrange. We welcome reader submissions.
Permalink New Product, Tactical 2 Comments »