June 7th, 2016

Super Father’s Day Gift: Custom Hitch Covers from John Niemi

John Niemi Trailer Hitch Custom Cover Mount headstamp brass

Here’s a great gift for Father’s Day that any dad with a truck should appreciate. Forum member John Niemi crafts custom hitch covers that look like the end of a cartridge case, complete with head-stamp. Costing $75.00 (delivered), they are made out of solid brass with a stainless steel “primer”. The diameter of the brass is 4 inches and the engraved letters are about half an inch tall. The section that slides over the trailer hitch is aluminum, so you don’t have to worry about rust.

Niemi custom hitch coverThe “headstamp” can include your favorite cartridge-maker and caliber (wildcats too!), or you can include the name of your business. John tells us: “I can engrave any text on one as long as there is enough room for it. Turn around time is usually less then a week after payment. I have sold many of these and everyone has been extremely happy with the quality and workmanship that I put into my product. These make great one-of-a-kind gifts.”

$75.00 Delivered in the USA
The current price for brass bullet hitch covers from John Niemi is $75.00 shipped anywhere in the USA. To order, send email to JohnNiemi [at] charter.net or call (503) 440-1954. John said he should be able to offer pretty quick turn-around, unless he just gets swamped this week.

Forum member Wayne (aka WAMBO) ordered a custom hitch cover from John, featuring the 30/338 Lapua Improved wildcat he calls the 300 WAMBOMAG. Wayne reports: “The hitch cover is very well made. I’m impressed with the quality. Buy with confidence.”

We’ve seen John’s craftsmanship on many of these hitches, and we can confirm that the hitches are beautifully made, and make a handsome addition to any vehicle. If you order one (or more), be sure to mention you learned about the hitch covers on AccurateShooter.com.

Permalink Bullets, Brass, Ammo, New Product 1 Comment »
June 30th, 2013

RCBS Summit Press Works Great in the Shop and in the Field

Gear Review by Mark LaFevers
RCBS Summit Press accurateshooter.comWith its innovative “moving die/static cartridge” design, the new RCBS Summit Press definitely demonstrates “out of the box” thinking. Unlike other presses, the case does not move. Rather, the reloading die comes down to the case. We are happy to report that this unique “upside-down” reloading press works great.

We have tested the new RCBS Summit Press in the workshop and in the field. We’ve now loaded hundreds of rounds with the press. It is smooth, solid, and easy to use. The spent primer ejection/capture system works great (our testers preferred the Summit’s simple, foolproof primer capture to the Rockchucker’s capture system). Most importantly, the Summit produces very straight ammo that gave excellent results on the target in actual matches.

We compared ammo loaded with the Summit with ammo loaded on an RCBS Rockchucker press. The Summit gave up nothing to the bigger press. Cartridge base-to-ogive measurements of Summit-loaded ammo were just as tight as with ammo loaded on the Rockchucker. Run-out, measured with a concentricity gauge, was the same or better (about .002 or less on bullet nose). Most importantly, the Summit loads accurate ammo. In fact, at one match, scores shot with Summit-loaded .284 Win ammo were actually better than scores shot (in the same gun) with ammo loaded on a Rockchucker:

Rockchucker .284 Win Loads (Day 1): 188-2X
Summit .284 Win Loads (Day 2): 192-5X

Despite its small footprint, the Summit is very stable — it doesn’t tip, wobble, or rock. The two front mounting bolts hold it firmly in place — the Summit doesn’t need a rear anchor. This, combined with the fact that the Summit has no overhang, makes the new press ideal for a mobile application. For field use (at the range), our tester Mark LaFevers mounted the Summit press on a small platform secured to his trailer hitch (on top of a steel post). This set-up worked great, as you can see in the video below:

Watch Reloading (Sizing/Decapping, Expanding, Bullet Seating) with Summit Press

Photo shows Redding Micrometer Seating Die and .284 Win Cartridge
RCBS Summit Press trailer hitch Mark Lafevers accurateshooter.com

Mark tells us: “I think the Summit press worked out sweet mounted on the hitch pedestal. The receiver hitch pedestal I made will switch tools between a heavy barrel vise I made and the Summit press. Instead of securing the pedestal with a standard 5/8″ hitch pin, I drilled and tapped for 1/2″-13 bolt to draw the insert up tight against the receiver, eliminating wobble. For charging rounds, I bought 150 plastic test tubes with caps and racks so I can avoid weighing powder charges in the field, unless I want to make changes on the fly.”

RCBS Summit Press accurateshooter.comThe new Summit Press features a rugged cast-iron frame with all-steel linkages. The press is very strong with minimal flex and slop. This allows you to “bump” your case shoulders and seat bullets with great precision and repeatability. The handle can be switched from right to left side (good for southpaws), and the open-front design provides good access, facilitating quick die changes*. The 4.5-inch opening allows you to work with tall cases. Beneath the shell-holder is a spent primer catcher (not shown in photos). The new Summit press has a beefy 2-inch diameter ram, with compound linkages for plenty of leverage. A zerk fitting is included for easy lubrication. The press will accept larger bushings for oversize 1-inch dies.

Summit Press Retails for $207.94
The new Summit Press (RCBS item #09290) lists for $269.95. However, Midsouth Shooters Supply offers the Summit Press for $207.94. An optional short handle from RCBS costs $15.27 at Midsouth ($19.95 MSRP).

RCBS Summit Press trailer hitch Mark Lafevers accurateshooter.com

*To permit his dies to be swapped from Rockchucker to Summit (and back again), with no locking ring adjustments, Mark LaFevers fabricated a new shell-holder base which positions the shell-holder .088″ higher relative to the Summit’s die port. This keeps Summit-mounted dies in the same position relative to the shell-holder as dies mounted in a Rockchucker. So, Mark can swap dies from his Rockchucker to his Summit and maintain exact COAL (when seating) and correct shoulder bump (when sizing). While Mark’s custom shell-holder base lets him swap dies quickly from one press to another, this is NOT a necessary modification. Most folks will simply re-set the locking rings.
Permalink - Videos, New Product 3 Comments »
June 17th, 2012

Great Father’s Day Gift: Custom Hitch Covers by John Niemi

Here’s a great gift for Father’s Day that any dad with a truck should appreciate. Forum member John Niemi crafts custom hitch covers that look like the end of a cartridge case, complete with head-stamp. Costing $70.50 (delivered), they are made out of solid brass with a stainless steel “primer”. The diameter of the brass is 4 inches and the engraved letters are about half an inch tall. The section that slides over the trailer hitch is aluminum, so you don’t have to worry about rust.

Niemi custom hitch cover Niemi custom hitch cover

The “headstamp” can include your favorite cartridge-maker and caliber (wildcats too!), or you can include the name of your business. John tells us: “I can engrave any text on one as long as there is enough room for it. Turn around time is usually less then a week after payment. I have sold many of these and everyone has been extremely happy with the quality and workmanship that I put into my product. These make great one-of-a-kind gifts.”

$75.00 Delivered in the USA
Niemi custom hitch coverThe current price for brass bullet hitch covers from John Niemi is $75.00 shipped anywhere in the USA. To order, send email to JohnNiemi [at] charter.net or call (503) 440-1954.

Forum member Wayne (aka WAMBO) ordered a custom hitch cover from John, featuring the 30/338 Lapua Improved wildcat he calls the 300 WAMBOMAG. Wayne reports: “The hitch cover is very well made. I’m impressed with the quality. Buy with confidence.”

We’ve seen John’s craftsmanship on many of these hitches, and we can confirm that the hitches are beautifully made, and make a handsome addition to any vehicle. If you order one (or more), be sure to mention you learned about the hitch covers on AccurateShooter.com.

Permalink Gear Review, New Product 2 Comments »
July 19th, 2011

Problem with Tailgaters? Try a Claymore Hitch Cover…

What do you get for the man who has everything? How about a replica Claymore mine trailer hitch cover. Produced by GG&G, a leading maker of scope rails and other gun accessories, the hitch cover tells tailgaters to “back off”. The Replica Claymore Hitch Cover is sized like the real deal and fits standard 2″ hitch receivers. It is manufactured from UV-stabilized polypropylene plastic. Each GG&G Claymore Hitch Cover has a red panel attached to both side edges with the word “REPLICA”. However, this item is still prohibited in some jurisdictions. Please read the Important Legal Disclosures below.

GG&G replica claymore mine hitch

The Claymore Hitch Cover is currently on sale for $39.95. If you like the idea, but don’t have a trailer hitch on your vehicle, check out the $37.00 Claymore Desk Accessory. It’s a perfect “conversation piece” for your den or office. The Desk Accessory It looks identical to the Claymore Hitch Cover but has an easel-type support.

ATTENTION — PLEASE READ CAREFULLY PRIOR TO ORDERING
NOTICE: This product is prohibited in some states including,
but not limited to, the following:

Colorado — This item is prohibited under Colorado 18-12-109, Para. 7.
Florida — This item is prohibited under Florida Statute 790.165
Connecticut — Statutes indicate that this item may be prohibited.
New Hampshire — Statutes indicate that this item may be prohibited.

State, county and municipal laws pertaining to items such as the Claymore Hitch Cover are varied. This product is prohibited in certain states. The purchaser and end user are responsible for knowing exactly what the local laws are concerning purchasing or displaying this product and for abiding by those laws. It is your responsibility before purchasing this product to know the local laws. The purchaser and the end user understand that the use of any look-alike or replica explosive in commission of a crime may carry the same legal ramifications as if real explosives had been so used.
Permalink New Product 1 Comment »